EventsThe 3rd International Online Conference on Biomimetics
Published
This submission belongs to the session S3. Bioinspired Robotics and Locomotion of the event The 3rd International Online Conference on Biomimetics
Published date
19 Nov, 2026
Academic Editor
author-avatarWeixi Huang
Contribution&Funding
Conceptualization,
[Shuichi Wakimoto]
Methodology,
[Daisuke Yamaguchi] ; [Takefumi Kanda]
Validation,
[Shuichi Wakimoto]
Investigation,
[Hayato Yamashita]
Data curation,
[Hayato Yamashita]
Project administration,
[Shuichi Wakimoto]
Funding: --
Citation
Hayato Yamashita, Shuichi Wakimoto, Daisuke Yamaguchi, Takefumi Kanda, Preliminary Development of a Biomimetic Prehensile Tail Mechanism Using Thin Pneumatic Artificial Muscles, in Proceedings of The 3rd International Online Conference on Biomimetics, 24 November–26 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Preliminary Development of a Biomimetic Prehensile Tail Mechanism Using Thin Pneumatic Artificial Muscles

1. Graduate School of Environment, Life, Natural Science and Technology School of Engineering, Okayama University, Okayama, 700-8530, Japan
Abstract

 The prehensile tails of New World monkeys, such as howler monkeys and spider monkeys, exhibit excellent grasping ability, allowing them to securely wrap around tree branches. Their tails consist of numerous caudal vertebrae, flexible intervertebral discs, and multiple muscle groups that cooperatively generate smooth and complex bending motions. These biological characteristics provide useful design principles for developing flexible robotic mechanisms capable of adapting to various objects and environments.

 This study proposes a bio-inspired robotic prehensile tail driven by thin pneumatic artificial muscles. Artificial muscles with an outer diameter of 2 mm were employed because of their flexibility, lightweight structure, and high force-to-weight ratio. A robotic prehensile tail mechanism was developed by arranging multiple bundles of artificial muscles around a skeletal structure. Independent actuation of each muscle bundle enabled multidirectional bending motions.

 To investigate the influence of regional vertebral morphology, three skeletal mechanisms corresponding to the proximal, middle, and distal regions of a monkey's caudal vertebrae were designed and fabricated. The vertebral models were fabricated using a 3D printer, while flexible intervertebral disc models were produced by silicone rubber injection molding. These components were assembled to construct each skeletal mechanism, and artificial muscle bundles were attached around the skeleton to generate dorsal, ventral, and lateral bending.

 Bending experiments were conducted under suspended conditions by applying pneumatic pressure from 0 to 400 kPa to the selected muscle bundles. The bending motions were recorded using a camera, and the joint and tip positions were obtained through image analysis to quantitatively evaluate the deformation.

 All three skeletal mechanisms successfully generated multidirectional bending. The bending displacement generally increased with increasing pneumatic pressure. The middle mechanism exhibited smaller bending displacement than the proximal mechanism, suggesting that its longer structure was more susceptible to gravitational effects. The distal mechanism showed bending accompanied by twisting, indicating three-dimensional deformation rather than simple planar bending. These results demonstrate the feasibility of a bio-inspired robotic prehensile tail capable of flexible multidirectional motion using a multi-muscle-driven skeletal mechanism.

Keywords
Biomimetic prehensile tail mechanism
McKibben artificial muscle
Multidirectional bending mechanism
Soft robotics
Development of a Sensorized Soft Finger with Integrated Wiring and Its Application to a Robotic Hand 
Body-Size Effects on Ω-Shaped Locomotion Performance of Cable-Driven Soft Robots