Biological attachment devices of insects and other animals contain complex micro- and nanostructures that enable attachment to various natural substrates and rapid detachment when required. In insects, deformable adhesive pads bearing numerous setae increase the real contact area and generate the normal adhesive and tangential friction forces needed for locomotion [1]. Plant surfaces may hinder insect attachment through their micro- and nanostructures, particularly three-dimensional epicuticular wax projections [2]. These projections reduce the available contact area, may contaminate the adhesive pads, and can deform or fracture during interaction with insect attachment organs. A mechanical description of this interaction must therefore consider both the time-dependent behaviour of plant wax and the attachment and detachment of individual setae. The viscoelastic behaviour of plant wax can be represented by the commonly used Maxwell, Voigt, and Burgers models, which consist of combinations of spring and dashpot elements. The Maxwell model describes instantaneous elastic deformation followed by viscous deformation, the Voigt model describes delayed elastic deformation, and the Burgers model combines recoverable deformation with an irreversible component [3]. These models describe the material response of the wax, whereas the Thomson model [4] can be modified to describe the rupture and possible healing of bonds between long-chain wax molecules. The Thomson model therefore provides a link between the viscoelastic deformation of plant wax and the progressive separation of an adhesive contact.
It is argued that viscoelastic models combined with a modified Fuller–Thomson model provide a mechanical description of strong seta attachment and controlled detachment from plant surfaces. The viscoelastic models explain the time-dependent deformation of plant wax, while the Fuller–Thomson model describes the successive rupture of adhesive bonds and the movement of the detachment boundary. The Fuller–Thomson model [5] extends the Thomson bond-rupture description to a one-dimensional chain whose neighbouring elements are elastically connected and whose bonds with the opposing surface can be broken. In our interpretation of the model, the deformable adhesive pad is represented by a bendable elastic chain, while individual setae are represented by stretchable springs connecting the pad to the plant surface, in accordance with spring models of biological attachment pads [6]. The deformation of one part of the pad changes the force transmitted to neighbouring setae, so attachment cannot be described as a set of independent contacts. The state of the system is determined by the displacements of the chain elements and by the position of the boundary between attached and detached setae. The total potential energy includes the work of the external detachment force, the deformation energy of the pad, the stretching energy of the attached setae, the interaction energy of the bond at the boundary of the contact region, and the surface energy associated with bonds that have already been broken. Each position of this boundary corresponds to a different equilibrium branch of the force-displacement relation. Detachment is consequently represented as a sequential process in which the boundary of the attached region moves from one seta to the next, rather than as the simultaneous detachment of the entire adhesive pad.
The force-displacement relation contains several equilibrium branches associated with different numbers of attached setae. Stable attached and partially detached configurations are separated by an unstable configuration, and a transition between neighbouring states requires the system to overcome an energy barrier. The areas between the force-displacement curve and the applied-force level determine the activation energies for forward detachment and reverse attachment. This description shows how the deformability of the adhesive pad, the stiffness of the setae, the interaction between a seta and the plant surface, and the work of adhesion jointly control attachment stability and progressive detachment. The model may be applied to artificial adhesives. The principles employed may also help explain biological and artificial anti-adhesive surfaces and support the development of attachment devices with functional micro- and nanostructures for repeated attachment-detachment cycles.
Reference
[1] Gorb, S. Attachment Devices of Insect Cuticle. Kluwer Academic, Dordrecht, 2001.
[2] Borodich, F.M.; Gao, Z.; Gorb, E.V.; Gorb, S.N.; Jin, X. Wax Protrusions on Anti-Adhesive Plant Surfaces and Their Interactions with Insect Adhesive Pads: A Mechanical Interpretation. Biomimetics 2024, 9, 442. https://doi.org/10.3390/biomimetics9070442.
[3] Lopez-Casado, G.; Salamanca, A.; Heredia, A. Viscoelastic nature of isolated tomato (Solanum lycopersicum) fruit cuticles: a mathematical model. Physiologia Plantarum 2010, 140, 79–88. https://doi.org/10.1111/j.1399-3054.2010.01379.x.
[4] Thomson, R. Theory of chemically assisted fracture. Journal of Materials Science 1980, 15, 1014–1026. https://doi.org/10.1007/BF00552115.
[5] Fuller, E.R.; Thomson, R. Theory of chemically assisted fracture. Journal of Materials Science 1980, 15, 1027–1034. https://doi.org/10.1007/BF00552116.
[6] Schargott, M.; Popov, V.L.; Gorb, S.N. Spring model of biological attachment pads. Journal of Theoretical Biology 2006, 243, 48–53. https://doi.org/10.1016/j.jtbi.2006.05.023.