EventsThe 3rd International Online Conference on Biomimetics
Published
This submission belongs to the session S1. Biomimetic Design, Constructions and Devices of the event The 3rd International Online Conference on Biomimetics
Published date
19 Nov, 2026
Academic Editor
author-avatarStanislav N. Gorb
Citation
Nurana Malikova, Inara Nagiyeva, Nahmad Ali-zadeh, Tofik Nagiev, Biomimetic desing of an electrochemical sensor utilizing TPhPFe³⁺/Al₂O₃ smart materials for detection H₂O₂ and C₂H₅OH, in Proceedings of The 3rd International Online Conference on Biomimetics, 24 November–26 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Biomimetic desing of an electrochemical sensor utilizing TPhPFe³⁺/Al₂O₃ smart materials for detection H2O2 and C2H5OH

Inara Nagiyeva 2
Tofik Nagiev 3
1. Institute of Chemistry Public Legal Entity under the Ministry of Education of the Republic of Azerbaijan, H.Cavid str, 113, Baku AZ1143 Azerbaijan
2. Department of Chemistry, Baku State University, Baku AZ1148 Azerbaijan
3. Azerbaijan National Encyclopedia, Baku AZ1143 Azerbaijan
Abstract

Biomimetics is an interdisciplinary field dedicated to investigating ecological mechanism and translating these principles into technological innovations. A prominent area within this discipline is the development of biomimetics sensors that emulate natural systems to enhance sensitivity and detection efficiency. These devices hold significant potential for environmental monitoring, climate change tracking, and esrly-stage medical diagnostics. In this study, materials widely established in bioelectronics were utilized to construct an electrochemical sensor, selected for their superior electrical conductivity, biocompatibility, and chemical stability in biological media. The electrode matrix incorporated various semiconductors (Si, Ge, Te) capable of facilitating efficient electron transport and serving as robust substrates for sensitive receptor elements. Iron tetraphenylporphyrin (TPhPFe3+) was employed as the active “smart material”. The biomimetics sensor was fabricated via an innovative architecture where the smart components, including enzymes, were deposited directly onto a substrate that simultaneously functioned as an electrode and transducer. Structurally, the sensor comprised two primary components: the transducer and the active biomimetic phase. Experimentally, TPhPFe3+ adsorbed on aluminium oxide (TPhPFe³⁺/Al₂O₃) was immobilized onto a silicon substrate using a silver-paste conductive adhesive. The resulting sensors exhibited high sensitivity and selectivity toward target analytes, specifically hydrogen peroxide (H2O2) and other chemical compounds involved in biochemical pathways.

Keywords
biomimetic
smart material
biosensor
Iron tetraphenylporphyrin
transducer
Reverse-Time Learning in Neural Networks: Time Direction Is Not a Constraint for Information Processing
Revealing the paradigm-shifting role of capillary waves in fluid-structure interactions by studying bubble-burst-induced droplet jumping