EventsThe 3rd International Online Conference on Biomimetics
Published
This submission belongs to the session S2. Biomimetic Materials—Structures, Surfaces and Interfaces of the event The 3rd International Online Conference on Biomimetics
Published date
19 Nov, 2026
Academic Editor
author-avatarYongmei Zheng
Contribution&Funding
Funding: The work was carried out with the financial support of the Russian Science Foundation grant, project No. 25-23-20121
Citation
Diana Ahn, Daria Nikolaevna Bogdanova, Timur Aydemir, Vasilina Zakharova, Development of collagen-containing hydrogel inks for in situ extrusion using an autonomous bioprinting complex "tissue gun", in Proceedings of The 3rd International Online Conference on Biomimetics, 24 November–26 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Development of collagen-containing hydrogel inks for in situ extrusion using an autonomous bioprinting complex "tissue gun"

Diana Ahn 1
Daria Nikolaevna Bogdanova 1
Timur Aydemir 1
image
1. College of Biomedical Engineering, National University of Science and Technology MISIS, Moscow, Russia
Abstract

Extrusion methods of in situ printing, such as the "tissue gun" – a type of dosing device created by the authors of the theses [1] – involve the formation of an atraumatic wound-protective coating directly in the area of the tissue defect with precision accuracy, thereby reducing the risks of infection. Furthermore, the extrusion of "ink" directly into the area of the tissue defect contributes to more efficient and rapid integration of the applied bioactive layer of the material with the surrounding tissues, facilitates targeted drug delivery and, as a result, accelerates the regeneration process.

The creation of devices for in situ printing is inextricably linked to the task of developing and modifying extruded materials – "ink". The use of sodium alginate (SA) polysaccharide as a base for creating "ink" is due to its biological functionality, the rheological properties of its solutions, and the ability to gel in the presence of Ca²⁺ ions [2]. However, SA does not contain specific ligands that promote the adhesion and proliferation of cell cultures, which in turn slows down the processes of epithelialisation of the surface of damaged tissues. One way to increase the bioactivity of in situ printing inks with a set of specified properties is to modify the alginate matrix by adding a chemoattractant, type I collagen, which is the main structural protein of native skin.

Thus, the aim of this work is to develop hydrogel inks for in situ printing based on sodium alginate modified with type I collagen in the presence of calcium sulphate as a structuring agent and ascorbic acid as a protein solvent providing antioxidant protection.

Solutions of sodium alginate and type I collagen of various concentrations (1–10%) were selected as the studied systems. The properties of the initial solutions, as well as the processes of their gelation, were studied using rheological approaches. The effect of pH and temperature on the processes of fibrillogenesis of type I collagen isolated from rat tails was studied in detail. The optimal ratio of alginate and collagen, as well as of the crosslinking agent, was selected. The effect of their introduction on the rheological characteristics of the resulting "ink", as well as on the kinetic processes of their gelation, was studied. The viscous and optical properties of the resulting system, the interaction of the components in the mixture were studied, and the cytocompatibility was evaluated.

The resulting biopolymer hydrogel composition is a promising material with a set of improved properties for its further use as a basis for creating biocompatible wound coatings formed using in situ printing technologies directly in the patient's wound bed.

The work was carried out with the financial support of the Russian Science Foundation grant, project No. 25-23-20121.

[1]. Aydemir, T., Mironov, V.A., Senatov, F.S., Khesuani, Yu.D., Petrov, S.V. and Kudan, E.V., 2023. Handheld autonomous device for two-component bioprinting. Russian Patent No. 2793065 C1.

[2]. Shah P. P. et al. Extrusion-based 3D bioprinting of alginate-based tissue constructs //Procedia CIRP. – 2020. – Т. 95. – С. 143-148. doi: 10.1016/j.procir.2020.06.007

Keywords
hydrogel ink
alginate matrix
type I collagen
in situ extrusion
tissue defects
Performance Evaluation of Voltage Stability Indices in Stochastic MOOPF of Hybrid AC/DC Systems Using a CNN-Assisted Cooperative Bioinspired Swarm Intelligent Framework
Creation of Bioactive Foam-Forming Biopolymeric Compositions Incorporating Liposomal Components for Aerosol Therapy