EventsThe 3rd International Online Conference on Biomimetics
Published
This submission belongs to the session S2. Biomimetic Materials—Structures, Surfaces and Interfaces of the event The 3rd International Online Conference on Biomimetics
Published date
19 Nov, 2026
Academic Editor
author-avatarVictor Erokhin
Contribution&Funding
Conceptualization,
[Konstantin V. Deriabin] ; [Regina M. Islamova]
Methodology,
[Konstantin V. Deriabin]
Validation,
[Regina M. Islamova]
Investigation,
[Konstantin V. Deriabin]
Resources,
[Regina M. Islamova]
Data curation,
[Konstantin V. Deriabin]
Writing - original draft,
[Konstantin V. Deriabin]
Writing - review,
[editing] ; [Regina M. Islamova]
Visualization,
[Konstantin V. Deriabin]
Supervision,
[Regina M. Islamova]
Project administration,
[Konstantin V. Deriabin]
Funding acquisition,
[Konstantin V. Deriabin]
Funding: This study was supported by the Russian Science Foundation (project No. 25–73–00109; https://rscf.ru/en/project/25-73-00109/).
Citation
Konstantin V. Deriabin, Regina M. Islamova, Bioinspired Self-Healing and Stretchable Ru(II)-Containing Silicone Materials: From Structure Design to Luminescent Sensing of Toxic Heavy Metals, in Proceedings of The 3rd International Online Conference on Biomimetics, 24 November–26 November 2026, MDPI: Basel, Switzerland
Share
Email
Facebook
Twitter
LinkedIn

Bioinspired Self-Healing and Stretchable Ru(II)-Containing Silicone Materials: From Structure Design to Luminescent Sensing of Toxic Heavy Metals

1. Institute of Chemistry, St. Petersburg State University, St. Petersburg, 199034, Russia
Abstract

The pollution of water resources by heavy metals (Hg2+, Pb2+, etc.) is a critical environmental problem due to their high toxicity, bioaccumulation, and persistence in ecosystems [1]. The growing need for portable, flexible, stretchable and self-healing sensors for detection of heavy metals in water has stimulated the development of novel functional materials [2]. Luminescent sensors provide rapid response and high sensitivity, but common approaches rely on soluble probes, which limits reusability [2]. Solid-state flexible silicone materials offer a viable alternative due to their elasticity, good film-forming and self-healing ability to mimic the mechanical properties of living tissue [3]. Inspired by these principles, we developed a new class of bioinspired polymer-metal complexes based on ruthenium(II) and poly(2,2′-bipyridine-4,4′-dicarboxamide-co-polydimethylsiloxanes) (RuPDMSs) [2].

The most efficient synthetic approach comprises two steps: polycondensation to obtain polymer ligands with various molecular weights of the siloxane chain (Mn = 850–25,000), followed by high-temperature cross-linking via complexation with RuCl3•3H2O using dimethylformamide as a reducing agent [2]. The polymer ligands were characterized by 1H, 13C{1H} NMR, FTIR spectroscopy, and gel permeation chromatography. The structure of the obtained RuPDMSs was confirmed by FTIR and UV-vis spectroscopies indicating Ru–N and Ru–CO coordination. The ruthenium content in RuPDMSs, estimated by EDX spectroscopy, ranged from 0.03 to 0.35 wt%. RuPDMSs exhibit tensile properties, which are typical for silicone materials, featuring a wide range of tensile strength (up to 1.2 MPa), Young’s modulus (up to 44.2 MPa), and elongation at break (up to 800%). An increase in the Mn of the siloxane chain enhances not only the flexibility and stretchability of the materials but also imparts them with self-healing ability at 100 °C, reaching a healing efficiency of up to 91%.

The RuPDMSs display orange luminescence at 602–604 nm with lifetimes reaching 1.26 μs upon excitation at 478 nm, typical of ruthenium(II) complexes. The thin films of RuPDMSs act as luminescent sensors for Cu2+, Hg2+, and Pb2+, displaying a "turn-off" response (with LOD values down to 8.6 μM) upon ion recognition enabled by the amide groups of the bipyridine ligand, which bind metal ions and cause luminescence quenching. The combination of stretchability, self-healing, and luminescent sensing in a single material opens new avenues for bioinspired soft sensors and wearable devices for heavy metal ion sensing in environmental applications [2].

Acknowledgements: This study was supported by the Russian Science Foundation (project No. 25–73–00109; https://rscf.ru/en/project/25-73-00109/).

References:

1.  Hama Aziz, K.H.; Mustafa, F.S.; Omer, K.M.; Hama, S.; Hamarawf, R.F.; Rahman, K.O. Heavy Metal Pollution in the Aquatic Environment: Efficient and Low-Cost Removal Approaches to Eliminate Their Toxicity: A Review. RSC Adv. 2023, 13, 17595–17610. DOI: 10.1039/d3ra00723e.

2.  Deriabin, K.V.; Islamova, R.M. Redox-Active Ru(II)-Bipyridinedicarboxamide-Based Polysiloxane Complexes as Photoluminescent Chemosensors for Heavy Metal Ions and pH. ACS Appl. Polym. Mater. 2026, 8, 11269–11285. DOI: 10.1021/acsapm.6c01288.

3.  Deriabin, K.V.; Filippova, S.S.; Islamova, R.M. Self-Healing Silicone Materials: Looking Back and Moving Forward. Biomimetics 2023, 8, 286. DOI: 10.3390/biomimetics8030286.

Keywords
ruthenium(II)
polysiloxanes
polymer-metal complexes
self-healing
tensile properties
luminescence
heavy metal ion sensors
Pillar[5]arene as a Component for Modulating the Properties of Plant Proteases within Supramolecular Systems with Selective Antibacterial Activity
Development of a Biomimetic PLGA-Based Dactinomycin Delivery System for Melanoma Therapy