Cuttlefish, chameleons, and some other animals can change their skin color according to environmental changes for camouflage, signaling or thermoregulation. This ability has inspired scientists to create color changing materials. For instance, electrochromic materials require an applied potential for color alteration. One application of these materials is smart windows, which control the amount of heat or light passing through them [1].
Poly(3,4-ethylenedioxythiophene) (PEDOT) is a conductive and electrochromic polymer with a blue coloration in the reduced state. However, pure PEDOT is brittle and hardly processable. Therefore, hybrid copolymers of PEDOT and flexible polymers, such as polydimethylsiloxanes (PDMS), can be promising for flexible redox-active and electrochromic devices [2].
Here we report two methods for the synthesis of electrochromic copolymers poly(3,4-ethylenedioxythiophene)-co-polydimethylsiloxanes (PEDOT-PDMS): chemical oxidative polymerization and electropolymerization. At first, thienyl-terminated polysiloxanes were synthesized via hydrosilylation between hydride-terminated polydimethylsiloxanes and 2-vinylthiophene or 3-vinylthiophene. Then, these macromonomers were used for copolymerization with 3,4-ethylenedioxythiophene. Chemical oxidative copolymerization results in hardly processable polymer powders, while electrochemical polymerization forms thin redox-active films. The structure of the obtained PEDOT-PDMS was characterized in detail using nuclear magnetic resonance, Fourier-transform infrared, ultraviolet-visible, and X-ray photoelectron spectroscopies. The electrochemical behavior of PEDOT-PDMS films was investigated by electrochemical impedance spectroscopy and cyclic voltammetry. The resulting copolymers demonstrate effective electrochromic performance, with coloring efficiency reaching ηC = 180 cm2·C−1 and switching times of 6.0 and 1.3 s for the coloring and bleaching processes, respectively. These hybrid PEDOT-PDMS are promising for flexible electronic and electrochromic materials.
This research was funded by the Russian Science Foundation (№ 24-13-00038). The physicochemical measurements were performed at the Research Park of the St. Petersburg State University (Magnetic Resonance Research Centre, Chemical Analysis and Materials Research Centre, Centre for Optical and Laser Materials Research, Centre for Physical Methods of Surface Investigation, and Cryogenic Department).
References:
1. Feng, K.; Ma, Y.; Zhang, L.; Liu, Y.; Liu, Y.; Xing, Z.; Pei, X.; Wu, Y.; Zhou, F. Electrically Controlled Smart Window for Seasonally Adaptive Thermal Management in Buildings. Small 2025, 21, 2407033, doi:10.1002/smll.202407033.
2. Kocheva, A.N.; Deriabin, K.V.; Volkov, A.I.; Ponomareva, A.V.; Levin, O.V.; Islamova, R.M. Flexible, Conductive, and Electrochromic Hybrids Based on Poly(3,4-Ethylenedioxythiophene) and Polydimethylsiloxanes. ACS Appl. Polym. Mater. 2025, 7, 11873–11889, doi:10.1021/acsapm.5c02310.