EventsThe 7th International Multidisciplinary Conference on Optofluidics 2017
Published
This submission belongs to the session 01. Micro-/nano-fluidics of the event The 7th International Multidisciplinary Conference on Optofluidics 2017
Published date
17 Jul, 2017
Citation
Chen Jing Jie, Concentration Generator With On Chip Vacuum Pump , in Proceedings of The 7th International Multidisciplinary Conference on Optofluidics 2017, Singapore, 25 July–28 July 2017, MDPI: Basel, Switzerland, doi: 10.3390/optofluidics2017-04143
Share
Email
Facebook
Twitter
LinkedIn

Concentration Generator With On Chip Vacuum Pump

1. National Taiwan University, Institute of Applied Mechanics
Abstract

We present an innovative concentration generator with on chip vacuum pump. The concentration generator is contained the microfluidic channel and self-priming microfluidic device. The microfluidic channel structure is made up from polypropylene which characteristic are ultra-thin (under than 100 um), cost effective, mass producible, rapid fabrication process.  The self-priming microfluidic device also has many feature, like thin residual layer (under than 100 um), on chip new pumping method, standing alone device, minimal manual operation, commercialize. In this paper, we propose the design of microchannel which generating concentration gradient, and introduce the fabrication process, simulation, and experimental result. Due to all the advantages, we think this concentration generator system can be used on biochip.

Keywords
Concentration generator
vacuum pump
microfluidics
hot embossing
micromixer
comsol
An Integrated Micro-bioreactor for enhancing the production of microalgal products
Controllable Elasto-inertial Focusing of Particles in Spiral Microfluidics