EventsThe Eighteenth International Conference of Experimental Mechanics
Published
This submission belongs to the session ICEM. ICEM 2018 of the event The Eighteenth International Conference of Experimental Mechanics
Published date
27 May, 2018
Citation
Joost Segers, Mathias Kersemans, Erik Verboven, Saeid Hedayatrasa, Javier Calderon, Wim Van Paepegem, 134 Investigation to Local Defect Resonance for Non-Destructive Testing of Composites, in Proceedings of The Eighteenth International Conference of Experimental Mechanics, Brussels, 1 July–5 July 2018, MDPI: Basel, Switzerland, doi: 10.3390/ICEM18-05273
Share
Email
Facebook
Twitter
LinkedIn

134 Investigation to Local Defect Resonance for Non-Destructive Testing of Composites

image
Javier Calderon 1
1. Department of Materials Science and Engineering, Ghent University, Technologiepark-Zwijnaarde 903, 9052 Zwijnaarde, Belgium
2. SIM Program M3 DETECT-IV, Technologiepark-Zwijnaarde 935, B-9052 Zwijnaarde, Belgium
Abstract

Local defect resonance (LDR) makes use of high frequency vibrations to get a localized resonant activation of a defective region. In this study, the LDR behavior of carbon fiber reinforced polymer (CFRP) coupons with three different types of damages is investigated using broadband measurements obtained with a scanning laser Doppler vibrometer (SLDV). First, the LDR response of flat bottom holes of different depths and sizes is evaluated using a signal-to-noise ratio. Next, results are obtained for ETFE inserts where the difference between (artificial) delaminations and inserts is outlined. At last, the vibrational response of a CFRP coupon with barely visible impact damage is investigated. This type of damage has a more complex structure, and it is shown that frequency band data (an alternative to the single frequency LDR) performs well in identifying such complex damage.

Keywords
Local defect resonance (LDR)
Frequency Band Data (FBD)
Non-Destructive Testing (NDT)
Composite materials
Laser Doppler Vibrometry (LDV)
Elasticity constants of a two-phase tungsten thin film
193 Dynamic tensile testing of brittle composites using a hydraulic pulse machine: stress-strain synchronization and strain rate limits