Event submissions
Published
This submission belongs to the session ICEM. ICEM 2018 of the event The Eighteenth International Conference of Experimental Mechanics
Published date
05 Jun, 2018
Citation
João Eduardo Ribeiro, Arlindo Pascoal, Eduardo Izeda, Vinícius Cecilio, Nuno Mineiro, José Gonçalves, Robotic Welding Tests MIG Standard and CMT+P in Aluminum Alloy 6082-T6 for Optimization of Penetration, Cord Width and Reinforcement, in Proceedings of The Eighteenth International Conference of Experimental Mechanics, Brussels, 1 July–5 July 2018, MDPI: Basel, Switzerland, doi: 10.3390/ICEM18-05295
Share
Email
Facebook
Twitter
LinkedIn
Robotic Welding Tests MIG Standard and CMT+P in Aluminum Alloy 6082-T6 for Optimization of Penetration, Cord Width and Reinforcement
'%3e%3cpath%20d='M12.6647%2010.9104C12.4176%2010.325%2012.0589%209.7933%2011.6088%209.34485C11.16%208.89511%2010.6283%208.53653%2010.0432%208.28891C10.038%208.28629%2010.0327%208.28498%2010.0275%208.28236C10.8437%207.69282%2011.3743%206.73252%2011.3743%205.64907C11.3743%203.85423%209.92005%202.40002%208.12522%202.40002C6.33038%202.40002%204.87618%203.85423%204.87618%205.64907C4.87618%206.73252%205.40677%207.69282%206.22296%208.28367C6.21772%208.28629%206.21248%208.2876%206.20724%208.29022C5.62031%208.53783%205.09365%208.89287%204.64167%209.34616C4.19192%209.79496%203.83334%2010.3266%203.58573%2010.9117C3.34247%2011.4846%203.21128%2012.0987%203.19925%2012.721C3.1989%2012.735%203.20135%2012.7489%203.20646%2012.7619C3.21157%2012.7749%203.21924%2012.7868%203.22901%2012.7968C3.23877%2012.8068%203.25045%2012.8148%203.26334%2012.8202C3.27623%2012.8256%203.29007%2012.8284%203.30406%2012.8284H4.09012C4.14776%2012.8284%204.19362%2012.7825%204.19493%2012.7262C4.22113%2011.7148%204.62726%2010.7676%205.34519%2010.0497C6.08802%209.30686%207.07452%208.89811%208.12522%208.89811C9.17592%208.89811%2010.1624%209.30686%2010.9052%2010.0497C11.6232%2010.7676%2012.0293%2011.7148%2012.0555%2012.7262C12.0568%2012.7839%2012.1027%2012.8284%2012.1603%2012.8284H12.9464C12.9604%2012.8284%2012.9742%2012.8256%2012.9871%2012.8202C13%2012.8148%2013.0117%2012.8068%2013.0214%2012.7968C13.0312%2012.7868%2013.0389%2012.7749%2013.044%2012.7619C13.0491%2012.7489%2013.0515%2012.735%2013.0512%2012.721C13.0381%2012.0947%2012.9084%2011.4856%2012.6647%2010.9104ZM8.12522%207.90243C7.52388%207.90243%206.95792%207.66793%206.53214%207.24215C6.10636%206.81636%205.87185%206.2504%205.87185%205.64907C5.87185%205.04773%206.10636%204.48177%206.53214%204.05599C6.95792%203.63021%207.52388%203.3957%208.12522%203.3957C8.72655%203.3957%209.29252%203.63021%209.7183%204.05599C10.1441%204.48177%2010.3786%205.04773%2010.3786%205.64907C10.3786%206.2504%2010.1441%206.81636%209.7183%207.24215C9.29252%207.66793%208.72655%207.90243%208.12522%207.90243Z'%20fill='%235D1EE1'/%3e%3c/g%3e%3c/svg%3e)
Arlindo Pascoal 1
Eduardo Izeda 1
Vinícius Cecilio 2
Nuno Mineiro 3
José Gonçalves 2
João Eduardo Ribeiro 2
1. FEUP, Faculty of Engineering of University of Porto, 4200-465, Portugal
2. ESTIG, Institute Polytechnic of Bragança, 5300-253, Portugal
3. Roboplan, Aveiro, 3800-042, Portugal
Abstract
The present article describes an experimental analysis of a robotized Gas Metal-arc Welding (GMAW) in aluminum alloy, using Metal Inert Gas (MIG) in its transfer method variation Standard and pulsed Cold Metal Transfer (CMT+P), developed in order to optimize the penetration depth, width and reinforcement of the weld bead. The base metal was the aluminum alloy 6082-T6 and the filler metal was aluminum alloy 5754.
Keywords
Robotic MIG welding
aluminum welding
MIG CMT+P pulse
Taguchi method.
Optimization of robotized welding in Aluminum alloys with Pulsed transfer mode using the Taguchi method
291 Experimental investigation on the explosive substitute by drop test