EventsThe Eighteenth International Conference of Experimental Mechanics
Published
This submission belongs to the session ICEM. ICEM 2018 of the event The Eighteenth International Conference of Experimental Mechanics
Published date
19 Jul, 2018
Citation
Fujun Yang, Nan Tao, Yinhang Ma, Hanyang Jiang, Meiling Dai, 245 Investigation on non-linear vibration response of cantilevered thin plates with crack using Electronic speckle pattern interferometry, in Proceedings of The Eighteenth International Conference of Experimental Mechanics, Brussels, 1 July–5 July 2018, MDPI: Basel, Switzerland, doi: 10.3390/ICEM18-05456
Share
Email
Facebook
Twitter
LinkedIn

245 Investigation on non-linear vibration response of cantilevered thin plates with crack using Electronic speckle pattern interferometry

Nan Tao 1
Yinhang Ma 1
Hanyang Jiang 1
1. School of Civil Engineering, Southeast University, Nanjing 210089, PR China
Abstract

The time-averaged electronic speckle pattern interferometry (ESPI) is employed to measure the frequencies and mode shapes of thin, cantilevered plates with root-slit. The first 12 order linear resonance frequency and mode shape of an intact cantilevered plate is determined by using FEM calculation. The dynamic response of the intact specimen forced by a PZT actuator is measured and its super-harmonic resonance of forced response is investigated experimentally. The results show that the principal mode shape of super-harmonic vibration is similar to its natural modal. In contrast to linear forcing vibration, the threshold of force for super-harmonic resonance is much higher than that of the former. In addition, linear free response of four cantilevered root-slit plates with variation length of slit are analyzed by applying the FEM calculation, and their responses of forcing vibration were measured by using the ESPI method. The validity and accuracy of the numerical prediction are confirmed through experimental studies. The present work shows that the ESPI technique can provide whole-field and real-time measurement for vibration analysis and can also be employed for validation of the FEM calculation.

Keywords
Time-averaged electronic speckle pattern interferometry
Vibration response measurement
superharmonic resonance
Cantilevered rectangular plates with slit
Ultrasonic Measurement of Velocity Profile on Bubbly Flow Using a Single Resonant Frequency
Experimental modal analysis of violins made from composites