Events1st Corrosion and Materials Degradation Web Conference
Published
This submission belongs to the session S8. Corrosion-Barrier Coatings of the event 1st Corrosion and Materials Degradation Web Conference
Published date
08 May, 2021
Citation
Sanjay S. Latthe, Rajaram S Sutar, Kishor Kumar Sadasivuni, Shanhu Liu, Lazy ways to attain self-cleaning superhydrophobic coatings, in Proceedings of 1st Corrosion and Materials Degradation Web Conference, 17 May–19 May 2021, MDPI: Basel, Switzerland, doi: 10.3390/CMDWC2021-09970
Share
Email
Facebook
Twitter
LinkedIn

Lazy ways to attain self-cleaning superhydrophobic coatings

image
image
1. Raje Ramrao College, Jath, India
2. Self-cleaning Research Laboratory, Department of Physics, Raje Ramrao College, Jath – 416404, Maharashtra, India
3. Center for Advanced Materials, Qatar University, P. O. Box 2713, Doha, Qatar
4. College of Chemistry and Chemical Engineering, Henan University, Kaifeng 475001, P.R. China
Abstract

Lotus leaf based superhydrophobic surfaces exhibit water contact angle greater than 150° and sliding angle of less than 10°. Currently such superhydrophobic coatings are interests of common people due to its extra-ordinary self-cleaning performance. Since last two decades, tremendous developments have been done in design, fabrication and application of self-cleaning superhydrophobic coatings. Both sophisticated and easy ways in attaining self-cleaning superhydrophobic coatings are found in literature. In this review article, we are trying to summarize an easy and cheaper ways to fabricate self-cleaning superhydrophobic coatings. Various chemicals, methodologies and deposition methods adopted will be briefly discussed. This review article may found beneficial for the early career researchers working in the superhydrophobic research field.

Keywords
superhydrophobic
self-cleaning
wetting
lotus effect
contact angle
coatings
Hydrophobic and corrosion resistant composite hot-dip zinc coating for protection of steel
Fabrication of cobalt-based nanocomposite film for corrosion mitigation of copper in flow chloride medium