Name: The 2nd International Electronic Conference on Metals
Start: 2025-05-05T00:00:00
End: 2025-05-07T00:00:00

Program Overview

5 May 2025	6 May 2025	7 May 2025
Welcome and Opening Remarks Event Chairs (08:50 CEST\| 02:50 EDT\| 14:50 CST)	Session 7. Corrosion, Wear, and Protection Keynote and Invited Talks Contributed Oral Presentations (09:00 CEST\| 03:00 EDT\| 15:00 CST)	Session 6. Additive Manufacturing and Session 8. Metallic Materials Processing Keynote and Invited Talks Contributed Oral Presentations (09:00 CEST\| 03:00 EDT\| 15:00 CST)
Session 9. Metallic Materials for Biomedical Applications Keynote and Invited Talks Contributed Oral Presentations (09:00 CEST\| 03:00 EDT\| 15:00 CST)
Break	Break	Break
Session 4. Entropic Alloys and Meta-Metals and Session 1. Computation, AI, and Machine Learning on Metals Keynote and Invited Talks Contributed Oral Presentations (15:00 CEST\| 09:00 EDT\| 21:00 CST)	Session 5. Metallic Functional/ Electronics Materials Keynote and Invited Talks Contributed Oral Presentations (14:00 CEST\| 08:00 EDT\| 20:00 CST)	Session 3. Microstructure of Metals and Alloys and Session 2. Metallic Materials Chemistry Keynote and Invited Talks Contributed Oral Presentations (14:00 CEST\| 08:00 EDT\| 20:00 CST)

*CEST - Central European Summer Time
EDT - Eastern Daylight Time
CST - China Standard Time

IECME Program - Day 1

S9. Metallic Materials for Biomedical Applications

Date: 5 May 2025 (Monday)
Time: 8:50 (CEST, Basel) | 02:50 (EDT, New York) | 14:50 (CST Asia, Beijing)

Time (CEST)	Speaker	Title
08:50-09:00	Prof. Dr. Dongyang Li and Prof. Dr. Yung C. Shin Event Chairs	Welcome and Opening Remarks
09:00-09:10	Prof. Dr. Francesca Borgioli Session Chair	Welcome by Session Chair
09:10-09:25	Prof. Dr. Roberto Chiesa Invited Speaker	Surface Treatments for Implantable Metals: Present and Future
09:25-09:40	Prof. Dr. Silvia Spriano Invited Speaker	Metal Surfaces as Interfaces with Liquids and Biological Tissues: Texturing and Functionalization for Biomolecule Release and Adsorption
	Contributed Oral Presentations	Session 9. Metallic Materials for Biomedical Applications
09:40-09:55	Hemant Kumar Pant Selected Speaker	Development of Mg-1Zn-1Ca-xZnO (x = 0 and 2 wt.%) composite using disintegrated melt deposition method for biomedical applications
09:55-10:10	Nadezhda Artyukhova Selected Speaker	Creation of thin TiNi wires with stabilized martensite phase
10:10-10:25	Elena Aldisovna Bolshevich Selected Speaker	Study of corrosion behavior of biocompatible porous monolithic material based on titanium nickelide
10:25-10:40	Amantle Balang Selected Speaker	Surface Roughness Optimization of CP Titanium for Improved Osseointegration in Dental Implants
10:40-10:55	Mina Ahmadi Selected Speaker	A review on perovskite magnetic nanoparticles (MNPs) used in magnetic hyperthermia (HT)
10:55-15:00	Break	Break

S4. Entropic Alloys and Meta-Metals and
S1. Computation, AI, and Machine Learning on Metals

Date: 5 May 2025 (Monday)
Time: 15:00 (CEST, Basel) | 09:00 (EDT, New York) | 21:00 (CST Asia, Beijing)

Time (CEST)	Speaker	Title
15:00-15:10	Prof. Dr. Sake Wang Session Chair	Welcome by Session Chair
15:10-15:30	Prof. Dr. Sake Wang Keynote Speaker	Two-Dimensional Valleytronic Materials: From Principles to Device Applications
	*Contributed Oral Presentation*	Session 4. Entropic Alloys and Meta-Metals
15:30-15:45	Isaque Moura Selected Speaker	Impact of B₄C on phase transformation and mechanical behavior in metastable High-Entropy Alloys
15:45-16:00	Break	Break
16:00-16:10	Prof. Dr. Chuang Deng Session Chair	Welcome by Session Chair
16:10-16:25	Prof. Liang Qi Invited Speaker	Physics-informed Machine Learning Design of Refractory Complex Concentrated Alloys for Advanced Manufacturing
	Contributed Oral Presentations	Session 1. Computation, AI, and Machine Learning on Metals
16:25-16:40	Arman Hobhaydar Selected Speaker	An Integrated Experimental and Quantum/Atomic Modelling of FeCrV-Based Refractory Medium Entropy Alloy for Nuclear Application
16:40-16:55	János György Bátorfi Selected Speaker	Effective modeling of cold rolling of metals
16:55-17:10	Zuoyong Zhang Selected Speaker	Interstitial grain boundary segregation in substitutional binary Al alloys
17:10-17:25	Mordecai Mashamaite Selected Speaker	Phase equilibrium of Ti-Pt-Nb high temperature shape memory alloys studied by cluster expansion techniques
17:25-17:40	Santiago Zapata Boada Selected Speaker	Predicting Corrosion Rate in Oil Wells Using First Principles and Machine Learning
17:40-17:55	Kseniya Utkina Selected Speaker	Prediction of the critical cooling rate in the dependence of the chemical composition of super duplex steel X03Cr23Ni6Mo4Cu3NbN

IECME Program - Day 2

S7. Corrosion, Wear, and Protection

Date: 6 May 2025 (Tuesday)
Time: 9:00 (CEST, Basel) | 03:00 (EDT, New York) | 15:00 (CST Asia, Beijing)

Time (CEST)	Speaker	Title
09:00-09:10	Prof. Dr. Branimir Grgur Session Chair	Welcome by Session Chair
09:10-09:30	Dr. Aleksandra Popović Keynote Speaker	Influence of Alkyd Composite Coatings with Polyaniline Doped with Different Organic Acids on the Corrosion of Mild Steel
	Contributed Oral Presentations	Session 7. Corrosion, Wear, and Protection
09:30-09:45	Kamelia Blyid Selected Speaker	Optimization of Zn-Ni Alloy coating to enhance corrosion resistance of carbon steel Kamelia Blyid, Rida allah Belakhmima, Mohamed Ebn Touhami
09:45-10:00	Nina Kovač Selected Speaker	PMMA–Siloxane–Silica Coating to Enhance Corrosion Resistance of AZ31
10:00-10:15	Maria Andrea Reyes Reyes Selected Speaker	Microbial corrosion in oil transportation and storage systems: laboratory-scale study on biofilm and pitting formation
10:15-10:30	Luca Pezzato Selected Speaker	Functionalization of metal surfaces through plasma electrolytic oxidation (PEO) treatments with the addition of particles
10:30-10:45	Marianthi Bouzouni Selected Speaker	Investigation of Surface Oxidation Behavior on High Tensile Brass and its Effect on Hot Forging
10:45-11:00	Zakia Aribou Selected Speaker	Exploring the Influence of Polymer Additives on the Structure and Morphology of Copper Electrodeposits in Acid Sulfate Electrolytes
11:00-14:00	Break	Break

S5. Metallic Functional/ Electronics Materials

Date: 6 May 2025 (Tuesday)
Time: 14:00 (CEST, Basel) | 08:00 (EDT, New York) | 20:00 (CST Asia, Beijing)

Time (CEST)	Speaker	Title
14:00-14:10	Prof. Dr. Juan José Suñol Martínez Session Chair	Welcome by Session Chair
14:10-14:30	Prof. Dr. Juan José Suñol Martínez Keynote Speaker	Advanced materials and Technologies in metallic materials
	Contributed Oral Presentations	Session 5. Metallic Functional/ Electronics Materials
14:30-14:45	Evgeniy D. Chernov Selected Speaker	Metallic and half-metallic properties of full Heusler alloy Co2MnGa with antisite defects
14:45-15:00	Jason Daza Selected Speaker	Innovation in Manufacturing Technologies with Eco-Sustainable Magnetic Materials
15:00-15:15	Semyon Timofeevich Baidak Selected Speaker	Anomalous metallic and half-metallic properties of the Gd₄Sb₃ intermetallic compound
15:15-15:30	Niclas Hanisch Selected Speaker	Ultrasonic Powder Atomization of Raney Nickel-type Precursors for Hydrogen Cathodes in Water Electrolysis

IECME Program - Day 3

S6. Additive Manufacturing and
S8. Metallic Materials Processing

Date: 7 May 2025 (Wednesday)
Time: 9:00 (CEST, Basel) | 03:00 (EDT, New York) | 15:00 (CST Asia, Beijing)

Time (CEST)	Speaker	Title
09:00-09:10	Prof. Dr. Abdollah Saboori Session Chair	Welcome by Session Chair
09:10-09:25	Dr. Gabriele Piscopo Invited Speaker	Laser Deposition (DED) as an effective tool for the additive repair: basic concepts and industrial applications
	Contributed Oral Presentations	Session 6. Additive Manufacturing
09:25-09:40	Mohammad Abankar Selected Speaker	Friction stir welding of laser powder bed fusion additively manufactured aluminum and copper alloys
09:40-09:55	Sanae Tajalli Nobari Selected Speaker	Development of new stainless steel via Laser powder bed fusion process
09:55-10:10	Alireza Moradi Selected Speaker	Machine learning-assisted material development via Laser powder bed fusion process
10:10-10:25	Somnath Nandi Selected Speaker	Performance Analysis of Ni-Doped SS316L Electro-Catalysts Synthesized via Wire Arc Additive Manufacturing (WAAM)
10:25-10:35	Prof. Dr. Shusen Wu Session Chair	Welcome by Session Chair
	*Contributed Oral Presentations*	Session 8. Metallic Materials Processing
10:35-10:50	Jaivindra Singh Selected Speaker	Exploring the Impact of MIG Brazing Techniques on Stability, Bead Morphology, and Joint Performance
10:50-11:05	Michael Johanes Selected Speaker	The Potential Property-Tailoring Effects of Cryogenic Treatment on Pure Zinc
11:05-11:20	Mohammad Uddin Selected Speaker	Effect of synergistic burnishing–tumbling treatment on surface roughness, microstructure, hardness and mechanical strength of AISI 304 alloys
11:20-14:00	Break	Break

S3. Microstructure of Metals and Alloys and

S2. Metallic Materials Chemistry

Date: 7 May 2025 (Wednesday)
Time: 14:00 (CEST, Basel) | 08:00 (EDT, New York) | 20:00 (CST Asia, Beijing)

Time (CEST)	Speaker	Title
14:00-14:10	Prof. Dr. Maria Cecilia Poletti Session Chair	Welcome by Session Chair
14:10-14:25	Dr. Safia Alleg Invited Speaker	Effect of the sintering conditions on the microstructure and mechanical properties of the high entropy alloys
	Contributed Oral Presentations	Session 3. Microstructure of Metals and Alloys
14:25-14:40	Esmaeil Shahryari Selected Speaker	Hot deformation mechanisms of a metastable Ti-18Mo alloy
14:40-14:55	Jiajia Shen Selected Speaker	Gas tungsten arc welding of as-cast AlCoCrFeNi2. 1 eutectic high-entropy alloy
14:55-15:10	Nthabiseng Nhlapo Selected Speaker	Microstructure of as-built 3D-printed Ti and Ti64 biomaterials alloyed with copper
15:10-15:20	Prof. Dr. Michael McNallan Session Chair	Welcome by Session Chair
	Contributed Oral Presentations	Session 2. Metallic Materials Chemistry
15:20-15:35	Suneel Selected Speaker	Environmental applications of S-doped g-C₃N₄in photocatalytic degradation of Congo Red dyes under solar light Irradiation
15:35-15:50	Taimo Priinits Selected Speaker	Structural Chemistry and Crystallographic Features of Nb₃Sn Intermetallics
15:50-16:05	Ayob Zanberi Selected Speaker	Catalytic effects of metal (Ti) addition on the dehydrogenation properties of aluminium hydride
16:05-16:20	Omar Boualam Selected Speaker	Development of Iron/Indium-Impregnated Illite: A Novel Catalyst for Dye Degradation in Aqueous Systems
16:20-16:35	Mohammad Ismail Selected Speaker	Catalytic effects of metals (Ni and Fe) addition on the dehydrogenation properties of aluminium hydride

5 May 2025	6 May 2025	7 May 2025
Welcome and Opening Remarks Event Chairs (08:50 CEST\| 02:50 EDT\| 14:50 CST)	Session 7. Corrosion, Wear, and Protection Keynote and Invited Talks Contributed Oral Presentations (09:00 CEST\| 03:00 EDT\| 15:00 CST)	Session 6. Additive Manufacturing and Session 8. Metallic Materials Processing Keynote and Invited Talks Contributed Oral Presentations (09:00 CEST\| 03:00 EDT\| 15:00 CST)
Session 9. Metallic Materials for Biomedical Applications Keynote and Invited Talks Contributed Oral Presentations (09:00 CEST\| 03:00 EDT\| 15:00 CST)
Break	Break	Break
Session 4. Entropic Alloys and Meta-Metals and Session 1. Computation, AI, and Machine Learning on Metals Keynote and Invited Talks Contributed Oral Presentations (15:00 CEST\| 09:00 EDT\| 21:00 CST)	Session 5. Metallic Functional/ Electronics Materials Keynote and Invited Talks Contributed Oral Presentations (14:00 CEST\| 08:00 EDT\| 20:00 CST)	Session 3. Microstructure of Metals and Alloys and Session 2. Metallic Materials Chemistry Keynote and Invited Talks Contributed Oral Presentations (14:00 CEST\| 08:00 EDT\| 20:00 CST)