Please login first

The 2nd Symposium on Materials Coating Science and Technology (MCST'2025)

Part of the Coatings series
Part of the MCST series
21–23 November 2025, Wuhan, China

The Science and Engineering of Coatings, Thin and Thick Films, Surfaces and Interfaces, Plasma Coatings, Surfaces Interfaces, Corrosion, Wear and Erosion, Bioactive Coatings and Biointerfaces, Ceramic Coatings and Engineering Technology
Bookmark
Bookmark event Remove event from bookmarks
Add this event to bookmarks
Contact Us
The 2nd Symposium on Materials Coating Science and Technology (MCST'2025) Successfully Concluded!

On behalf of the Organizing Committee, we would like to extend our sincere gratitude to all participants. Your outstanding presentations and active engagement were key to the success of the symposium.

Publication Opportunities

Participants of the conference are cordially invited to submit a complete manuscript to "Collection of Papers from the 2nd Symposium on Materials Coating Science and Technology (MCST'2025) ", a Special Issue of Coatings (ISSN: 2079-6412,IF: 2.8, CiteScore:5.4,Ei Compendex) and enjoy a 20% discount on the publication fee (approximately CNY 4,200).

Announcement of Award Winners

Yanpei Dang, Nano/micro-structured polymer-derived SiBCN ceramics via two-photon lithography
Xiaodong Wang, Investigation of sustained near-infrared light emission from inorganic fluorescent powders under near-infrared laser excitation

Basic Information

To enhance scientific and technological exchanges among experts and scholars in the field of coating science and technology, promote the application of coating technologies, and drive high-quality economic development, the MDPI international journal Coatings, in collaboration with The Advanced Ceramics Branch of The Chinese Ceramic Society, will host the the 2nd Symposium on Materials Coating Science and Technology (MCST'2025) in Wuhan, China, from November 21 to 23, 2025.
The symposium will feature 7 sessions covering various application-related areas of coating surfaces. Renowned experts and scholars will be invited to deliver keynote and invited speeches. The organizing committee warmly welcomes experts, scholars, engineers, and graduate students engaged in coating technology research and development to participate in this conference.

Conference Information
Conference Title: The 2nd Symposium on Materials Coating Science and Technology (MCST'2025)
Check-in: November 21, 2025
Conference Period: November 22-23, 2025
Conference Location: Eurasia Convention International Hotel, Wuhan, China

Event Chairs

Tsinghua University, Beijing, China

Shanghai Jiao Tong University, Shanghai, China

Xi'an Jiaotong University, Xi'an, China

Wuhan University of Technology, Wuhan, China

Huazhong University of Science and Technology, Wuhan, China

Event Committees

Huazhong University of Science and Technology, Wuhan, China

Wuhan University, Wuhan, China

Shanghai University, Shanghai, China

Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, China

Taiyuan University of Technology, Taiyuan, China

The Hong Kong Polytechnic University, Hong Kong, China

Sun Yat-sen University, Guangzhou, China

National University of Defense Technology, Changsha, China

Zhejiang University, Hangzhou, China

Nanjing Forestry University, Nanjing, China

Huazhong University of Science and Technology, Wuhan, China

Northeastern University, Shenyang, China

Guangdong University of Technology, Guangzhou, China

Northwestern Polytechnical University, Xi'an, China

Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, China

The Future Laboratory, Tsinghua University, Beijing, China

Shanghai Jiao Tong University, Shanghai, China

Shanghai Jiao Tong University, Shanghai, China

Qilu University of Technology, Jinan, China

University of Science and Technology Beijing, Beijing, China

University of Science and Technology Beijing, Beijing, China

Chongqing University, Chongqing, China

Wuhan University of Technology, Wuhan, China

Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, China

Shanghai Jiao Tong University, Shanghai, China

The University of Hong Kong, Hong Kong, China

Xi'an Jiaotong University, Xi'an, China

Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, China

Huazhong University of Science and Technology, Wuhan, China

Shanghai Jiao Tong University, Shanghai, China

Tsinghua University, Beijing, China

Pleanry Speakers

Southwest University, Chongqing, China

Hebei University of Technology, Tianjin, China

Ningbo University, Ningbo, China

Shanghai Jiao Tong University, Shanghai, China

Northeastern University, Shenyang, China

Tsinghua University, Beijing, China

Sessions Chairs and Speakers

S1. Surface Protective Coatings

Session Chairs:


Jianxi Liu
Northwestern Polytechnical University, Xi’an, China


Hengzhong Fan
Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, China


Lidong Sun
Chongqing University,
Chongqing, China


Wenzhi Huang
National University of Defense Technology, Changsha, China

Invited Speakers:


Jianxi Liu
Northwestern Polytechnical University, Xi’an, China


Hengzhong Fan
Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, China


Lidong Sun
Chongqing University,
Chongqing, China


Wenzhi Huang
National University of Defense Technology, Changsha, China


Pinghu Chen
University of South China, Hengyang, China


Hongbo Ju
Jiangsu University of Science and Technology, Zhenjiang, China


Kaixiong Gao
Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, China


Junjun Wang
Chongqing University of Technology, Chongqing, China


Hao Chen
University of Nottingham Ningbo China, Ningbo, China


Yanfei Wang
National University of Defense Technology, Changsha, China


Yubo Liu
Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, China


Lilong Pang
Institute of Modern Physics, Chinese Academy of Sciences,
Lanzhou, China

S2.Spraying Technology

Session Chairs:


Zhiyuan Wang
Harbin University of Science and Technology, Harbin, China


Meijun Liu
Xi’an Jiaotong University,
Xi’an, China


Liang Wang
Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, China

Invited Speakers:


Wei Pan
Tsinghua University,
Beijing, China


Wenzhi Huang
National University of Defense Technology, Changsha, China


Liang Wang
Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, China


Zhiyuan Wang
Harbin University of Science and Technology, Harbin, China


Meijun Liu
Xi’an Jiaotong University,
Xi’an, China


Fan Yang
Shanghai Jiao Tong University, Shanghai, China


Peng Song
Kunming University of Science and Technology,
Kunming, China


Peihu Gao
Xi’an Technological University,
Xi’an, China


Lirong Luo
Shanghai Jiao Tong University, Shanghai, China


Di Ouyang
Wuhan University of Technology, Wuhan, China


Xiao Shan
Shanghai Jiao Tong University, Shanghai, China

S3. Bio- and Biomedical Coatings

Session Chairs:


Yujun Song
University of Science and Technology Beijing, Beijing, China


Jun Jiang
Nanjing Forestry University, Nanjing, China


James Kit Hon Tsoi
The University of Hong Kong,
Hong Kong, China


Jun Mei
Shanghai Ocean University, Shanghai, China

Invited Speakers:


James Kit Hon Tsoi
The University of Hong Kong,
Hong Kong, China


Jun Mei
Shanghai Ocean University, Shanghai, China


Jun Jiang
Nanjing Forestry University, Nanjing, China


Yujun Song
University of Science and Technology Beijing, Beijing, China


Yun Zhao
China Agricultural University, Beijing, China


Yu Shen
Nanjing Forestry University, Nanjing, China


Wufang Yang
Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, China



S4. Deposition Technology and Applications

Session Chairs:


Jianzhong Li
Northeastern University, Shenyang, China


Yanpeng Xue
University of Science and Technology Beijing, Beijing, China


Pengfei Guo
Taiyuan University of Technology, Taiyuan, China

Invited Speakers:


Rong Tu
Wuhan University of Technology, Wuhan, China


Yanpeng Xue
University of Science and Technology Beijing, Beijing, China


Pengfei Guo
Taiyuan University of Technology, Taiyuan, China


Jianzhong Li
Northeastern University,
Shenyang, China


Ye Tian
North University of China,
Taiyuan, China


Huayi Yin
Wuhan University, Wuhan, China


Long Hao
Institute of Metal Research, Chinese Academy of Sciences,
Shenyang, China


Baofa Liu
Central Research Institute, Baoshan Iron & Steel Co., Ltd.,
Shanghai, China


Zhaohe Gao
Shanghai University,
Shanghai, China


Qiwei Wang
Jinan University, Guangzhou, China


Guoqing Wang
Nanjing Forestry University,
Nanjing, China



S5. Photofunctional Coatings

Session Chairs:


Lihong Gao
Beijing Institute of Technology, Beijing, China


Guangyi Ma
Dalian University of Technology, Dalian, China


Huatang Cao
Huazhong University of Science and Technology, Wuhan, China

Invited Speakers:


Yu Wu
Beijing Institute of Technology, Beijing, China


Guangyi Ma
Dalian University of Technology, Dalian, China


Huatang Cao
Huazhong University of Science and Technology, Wuhan, China


Jian Sun
China University of Geosciences (Wuhan), Wuhan, China


Yongchun Zou
Harbin Institute of Technology, Harbin, China


Ming Yang
Civil Aviation Flight University of China, Guanghan, China


Jianhong Wu
Ningbo University of Technology, Ningbo, China


Mao Zhang
Huazhong University of Science and Technology, Wuhan, China


Lixia Yang
Nanjing University of Aeronautics and Astronautics, Nanjing, China

S6. Energy Coatings

Session Chairs:


Heping Li
Huazhong University of Science and Technology, Wuhan, China


Qiang Wei
Hebei University of Technology, Tianjin, China

Invited Speakers:


Heping Li
Huazhong University of Science and Technology, Wuhan, China


Hebei University of Technology, Tianjin, China


Tao Zhang
Guangzhou University,
Guangzhou, China


Chengjie Xiang
Chongqing Jiaotong University, Chongqing, China


Wanping Chen
Wuhan University, Wuhan, China


Hongtao Huang
Sun Yat-sen University,
Guangzhou, China


Mengran Wang
Central South University,
Changsha, China


Weiyi Xing
University of Science and Technology of China, Hefei, China


Fenghua Zhang
Beijing University of Chemical Technology, Beijing, China

S7. Cultural Heritage Preservation

Session Chairs:


Jiao Pan
University of Science and Technology Beijing, Beijing, China


Yulan Hu
Zhejiang University,
Hangzhou, China

Invited Speakers:


Jiao Pan
University of Science and Technology Beijing, Beijing, China


Yulan Hu
Zhejiang University,
Hangzhou, China


Jianrui Zha
University of Science and Technology Beijing, Beijing, China

Instructions for Authors

Abstract Submission
Create an account on Sciforum if you do not have one and then click on the "Submit Abstract" at the top of this webpage.
Note: The email address used for registration must match the email address used for submission.

Abstract Instructions
The submission must be in Chinese. An English version of the abstract is optional, and there is no word limit.

Contribution Type
You will be asked to select the contribution type (oral contribution, poster contribution, or both) during the submission process. However, it is subject to change according to the decision of the conference chair and the scientific committee.

● Oral Presentation
Each oral presentation is allocated 15 minutes in total, including the presentation and Q&A. The presentation slides and the presentation language should be in Chinese. Presenters are kindly requested to prepare their slides using PowerPoint or similar software. A link for uploading the slides will be provided prior to the conference.

● Poster Presentation
Each presenter will be provided with a vertical poster board with dimensions of 80 cm × 140 cm. Posters for this conference will be uniformly printed by the organizing committee. Authors are required to upload the electronic version of the poster, prepared according to the specified dimensions, to the system by 12:00 noon on November 12, or send it to the conference email address at mcst2025@mdpi.com
Authors who fail to submit their posters by the deadline will need to prepare and bring their own roll-up (stand) poster.

Deadlines
The deadline for online abstract submission is Thursday, 16 October 2025, and the deadline for registration of covering authors is Tuesday, 9 September 2025.
You will be notified by Wedneday, 5 November 2025 regarding the the acceptance. Your abstract will be withdrawn if your registration is not completed by this date.

Registrations



Please click the Event Registration button above to complete your registration.

Participation to the conference is considered final only once the registration fees have been paid. Please note that, in order to finalize the scientific program in due time, at least one registration by anyone of the authors, denoted as Covering Author, is required to cover the presentation and publication of any accepted abstract. Covering Author registration deadline is 5 November 2025.

Please note that abstract submission and conference registration are two separate processes. During registration, please provide us with the same email address you used to submit your abstract(s). Otherwise, leave us a comment in the registration form, providing the email address used during the submission process. In addition, we prefer you to use your institutional email address for both processes.

Early Bird
Until 28 October 2025
Regular
Until 21 November 2025
Supported documents
Academic 2000.00 CNY 2200.00 CNY

Student

1200.00 CNY

1400.00 CNY
Scanned copy or photograph of your current student ID is required
Invited Speakers 1700.00 CNY 1900.00 CNY Invitation letter is required
Non-Academic 2300.00 CNY 2500.00 CNY
Cancellation policy

Cancellation of paid registration is possible under the terms listed below:

≥ 1 month before the conference

Full refund but 800 CNY are retained for administration

≥ 3 weeks before the conference

Refund 50% of the applying fees

≥ 2 weeks before the conference

Refund 25% of the applying fees

< 2 weeks before the conference

No refund

Payment methods

Wire transfer, Credit card

Currencies accepted by this event

Swiss francs (CHF) , Euros (EUR) , US dollars (USD) , Pounds sterling (GBP) , Japanese yen (JPY) , Canadian dollars (CAD) , Singapore dollars (SGD) and Chinese yuan (CNY)

Publication Opportunities

  • Coatings Journal Publication

    Participants of this conference are cordially invited to submit a complete manuscript to "Collection of Papers from the 2nd Symposium on Materials Coating Science and Technology (MCST'2025) ", a Special Issue of Coatings Journal (ISSN: 2079-6412,IF: 2.8, CiteScore:5.4,Ei Compendex) and enjoy a 20% discount on the publication fee (approximately CNY 4,200).
    Please note if you have IOAP/association discounts, conference discounts will be combined with IOAP/association discounts. Conference discounts cannot be combined with reviewer vouchers. All submitted papers will undergo MDPI’s standard peer-review procedure. The abstracts should be cited and noted on the first page of the paper.

  • Materials Proceeding Paper Publication

    You are welcome to submit a proceeding paper (4-8 pages) to Materials Proceedings journal (ISSN 2673-4605) after the conference. Publication of the proceedings will be free of charge. The proceeding paper will be open for submissions after the conference and closed on 7 January 2026.
    Authors are asked to disclose that it is a proceeding paper of the MCST 2025 conference paper in their cover letter. Carefully read the rules outlined in the 'Instructions for Authors' on the journal’s website and ensure that your submission adheres to these guidelines.
    For other Proceedings related submission questions, please feel free to contact laurel.xu@mdpi.com

  • Manuscripts for the proceedings issue must be formatted as follows:
    - Title.
    - Full author names.
    - Affiliations (including full postal address) and authors' e-mail addresses.
    - Abstract.
    - Keywords.
    - Introduction.
    - Methods.
    - Results and Discussion.
    - Conclusions.
    - Acknowledgements.
    - References.

    MCST 2025 Proceedings Paper Temple

Venue, Travel and Accommodation

Venue

The conference will be held at Eurasia Convention International Hotel. Located in the core area of Dongxihu District, Wuhan, the hotel enjoys a prime location adjacent to the municipal government and major business centers, offering excellent accessibility and convenient transportation. The hotel is equipped with advanced and comprehensive conference facilities, including multiple multifunctional halls of varying sizes, capable of accommodating international conferences, forums, exhibitions, and a wide range of professional events. With its elegant and tranquil environment, the hotel features modern and comfortable guest rooms, providing attendees with a high-quality accommodation experience. In addition, the hotel offers a variety of on-site amenities, including Chinese and Western restaurants, a fitness center, and a business center, ensuring comprehensive support for conference activities, professional exchange, and leisure throughout the event.

Basic Information
Venue: Eurasia Convention International Hotel – Beijing Hall
Address: No. 20 Jinyinhu Road, Dongxihu District, Wuhan, Hubei Province, China
Tel: +86 177 6254 9687
Email: whouya@ouyahotels.com


Venue Map


Transportation

Arrival by Plane
Wuhan Tianhe International Airport is approximately 21 km from the conference venue.
1. Taxi
Travel time: approx. 25–30 minutes
Estimated fare: RMB 60–80
2. Metro
Take Metro Line 2 from Tianhe Airport Station (towards Fozuling) → Transfer at Changqing Garden Station to Metro Line 6 (towards Xincheng 11th Road) → Alight at Jinyinhu Station (Exit C) → Walk approximately 230 meters to the venue
Total travel time: approx. 55–65 minutes

Arrival by Train
Hankou Railway Station (Recommended) is 8.6 km from the conference venue.
1. Taxi
Travel time: approx. 20 minutes
Estimated fare: RMB 40–50
2. Metro
Take Metro Line 2 from Hankou Railway Station (towards Tianhe Airport) → Transfer at Changqing Garden Station to Metro Line 6 (towards Xincheng 11th Road) → Alight at Jinyinhu Station (Exit C) → Walk approximately 230 meters to the venue
Total travel time: approx. 30 minutes

Wuhan Railway Station is 27 km from the conference venue.
1. Taxi
Travel time: approx. 46 minutes
Estimated fare: RMB 65–75
2. Metro
Take Metro Line 4 from Wuhan Railway Station (towards Berlin) → Transfer at Hongshan Square Station to Metro Line 2 (towards Tianhe Airport) → Transfer at Jianghan Road Station to Metro Line 6 (towards Xincheng 11th Road) → Alight at Jinyinhu Station (Exit C) → Walk approximately 230 meters to the venue
Total travel time: approx. 1 hour 15 minutes

Wuchang Railway Station is 22 km from the conference venue.
1. Taxi
Travel time: approx. 42 minutes
Estimated fare: RMB 50–60
2. Metro
Take Metro Line 4 from Wuchang Railway Station (towards Berlin) → Transfer at Zhongjiacun Station to Metro Line 6 (towards Xincheng 11th Road) → Alight at Jinyinhu Station (Exit C) → Walk approximately 230 meters to the venue
Total travel time: approx. 55 minutes

Hotel

Wuhan Eurasia Convention International Hotel
offers special accommodation rates for conference attendees:
-King Room: RMB 418 per room per night, including one buffet breakfast,
-Twin Room: RMB 438 per room per night, including two buffet breakfasts.

Room Reservation
To facilitate accommodation arrangements for attendees, a dedicated hotel booking channel is available for this conference. Please scan the QR code below to make your reservation.
This booking QR code is exclusively available to conference attendees.

Sponsors and Partners

Organizers


Co-organizers


Sponsors

Media Partners

Contact Us

Conference Secretariats
Ms. Jennifer Li
Ms. Yulia Zhao
Ms. Milly Li
Ms. Amy Cheng
Ms. Cassie Zhao
mcst2025@mdpi.com

For inquiries regarding submissions, registrations and sponsorship opportunities, please feel free to contact us.

Top