![](/events_files/698/Banner ASEC 2022 hero.jpg?1723858201)
The 3rd International Electronic Conference on Applied Sciences
Part of the International Electronic Conference on Applied Sciences series
1–15 Dec 2022
Biosciences, Chemistry, Materials, Artificial Intelligence, Mechanical Engineering, Nanotechnology, Communications, Energy and Environment, Dentistry
- Go to the Sessions
-
- A. Applied Biosciences and Bioengineering
- B. Chemistry and Materials Science
- C. Computing and Artificial Intelligence
- D. Electrical, Electronics and Communications Engineering
- E. Energy Science and Technology
- F. Environmental and Earth Sciences
- G. Mechanical Engineering
- H. Nanotechnology and Applied Nanosciences
- I. Optics and Lasers
- J. Sensors, Instrumentation and Measurement Science
- K. Applied Dentistry and Oral Sciences
- L. Student Session
- M. Posters
- Event Details
On behalf of the conference team of the 3rd International Electronic Conference on Applied Sciences, we would like to thank you for your participation by sending your contributions, being posters, slideshows or video presentations. We hope you've enjoyed it.
See you in the next edition!
List of accepted submissions (103)
Id | Title | Authors | Presentation Video | Poster PDF | |||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
sciforum-063100 | Potential of inert dust and Insect growth regulators against different life stages of Red Flour Beetle (Tribolium castaneum) | N/A |
![]() |
Show Abstract |
|||||||||||||||||||||||||||||||||||||
Tribolium castaneum is a major pest of stored products, in warmer climates. It infests seeds, kernels and other products, that have already been wounded by other pests during harvest and storage. Red flour beetle is a secondary pest it feed on the broken grains or on the remains of primary pest. Experiment was conducted to evaluated the efficacy of inert dust and IGR’s against the different life stages of T. castaneum through direct feeding bioassay. IGR’s were tested on 20, 10, 5, 2.5, 1.25, 0.75ppm and white kaolin clay was tested on 30, 25, 20, 15, 10g/kg. Two formulations of diatomaceous earth (100% pure food grade and calcium bentonite clay) of dose (400, 500, 600, 700 and 800 mg/kg and 500, 400, 250, 200 and 100mg/kg, respectively) were tested under lab conditions (22±2 °C, R. H. 55±5%, photo period 8 L:16 D). Results showed that white kaolin clay gave maximum control followed by Lufenuron> diatomaceous earth (100% food grade)> Methoxyfenozide> DE (calcium bentonite clay)> Pyriproxyfen after 21 days. Results also showed that all the treatments are dose and time dependent for the effective control. Further research work should be needed on residual studies to detect the deposited chemicals. |
|||||||||||||||||||||||||||||||||||||||||
sciforum-063352 | Investigation of the Effect of Whitening Mouthwashes on the Translucency of Composite Resins at Different Times | , | N/A | N/A |
Show Abstract |
||||||||||||||||||||||||||||||||||||
The aim of this study is to evaluate the effect of whitening mouthwashes on translucency change (ΔTP) at different times of composite resins after coloring with coffee. In the study, a total of 90 samples (30 samples from each composite resin) were prepared from resin materials (Estelite Σ Quick, G-Aenial Anterior; Omnichroma). After kept in coffee for 12 days, the samples were divided into three subgroups (n=10). The initial (T0) measurement of TP values were recorded. Control groups were kept in distilled water and the other groups were kept in two different mouthwashes (Listerine Advanced White, Crest 3D White). TP values at the end of 24 hours (T1) and 72 hours (T2) were recorded. TP values were determined using the CIEDE2000 formula. Two-way analysis of variance and Tukey test were used (p< 0.05). The lowest ΔTP value was observed in the control group at T0-T1 and T0-T2 times. The highest ΔTP value was observed in Crest 3D White mouthwash at T0-T2 time. However, there was no difference with Listerine Advance White. Among the composites, the highest ΔTP value was found in G-Aenial Anterior at T0-T2 time, and the lowest ΔTP value was found in Omnichroma at T0-T1 time. Whitening mouthwashes caused an increase in the translucency values of resin composites over time. It should be noted that long-term use of whitening mouthwashes may affect the translucency values of composite resins. |
|||||||||||||||||||||||||||||||||||||||||
sciforum-064008 | Lyotropic Liquid Crystal Precursor as an Innovative Herpes Simplex Virus Vector for Melanoma Therapy | , , , , , , | N/A | N/A |
Show Abstract |
||||||||||||||||||||||||||||||||||||
Oncolytic virotherapy has become the frontier of biological therapy for tumor treatment in recent years, especially the Herpes Simplex Virus-1 (HSV-1) approved by the U.S. Food and Drug Administration (FDA). However, current commercial formulations using HSV-1 require strict storage conditions (-80°C) to cope with its unstable characteristics. In addition, direct injection of HSV-1 may lead to virus migration to nontumor tissues or cause unexpected immune responses representing a therapeutic risk. Herein, we developed an HSV-loaded lyotropic liquid crystal precursor (LLCP) system with in situ gelation properties as the vector for HSV-1. The prepared HSV-LLCP showed a rapid gelling property (within 2 s) and the shear viscosity ranged from 5 to 9 mPa·s, indicating its excellent drug delivery performance. Upon encapsulating in LLCP, the storage conditions were improved to -4°C within 28 days, and the HSV-1 was protected with its unique crystal lattice. The release behavior of HSV-1 LLCP showed a triphasic sustained-release pattern during the experiment period, avoiding the potential side effects. In addition, HSV-LLCP exhibited a superior oncolytic activity compared to HSV-1 solution in murine melanoma B16 cells. This study showed that HSV-LLCP would become an alternative and promising HSV-1 vector with high safety and stability for melanoma treatment in the clinic. |
|||||||||||||||||||||||||||||||||||||||||
sciforum-064210 | A spatially resolved temperature measurement system for a honeybee colony brood box | , , , |
![]() |
![]() |
Show Abstract |
||||||||||||||||||||||||||||||||||||
Honeybee colonies are dependent on suitable temperature conditions for healthy colony development. Here we design, build, test, and demonstrate the use of a spatially resolved temperature measurement system for a honeybee colony brood box. We adapted a British National hive by building ten customised brood frames, each equipped with forty-eight temperature sensors, equating to four-hundred and eighty sensors across the hive. Thermistors were chosen for the temperature sensor in particular because they give a suitable measurement range. Each frame was connected to three sixteen-channel analogue multiplexers, the resulting analogue voltage was further digitized with a Teensy 3.5 microcontroller with data automatically saved using a Raspberry Pi. Two different spatially resolved temperature measurement hive systems were built. The first used four layers of foundation wax to embed the sensor array, and after populating it with a colony, the honeybees removed the wax exposing the sensors before building new honeycomb. A second system was produced which used a single sheet of foundation wax onto which the sensors were laid, and a swarm was introduced to it. The colony accepted the system and was found to build normal comb on the frames. Highly valuable spatially resolved temperature data was collected over this period. Consequently, we demonstrate two spatially resolved temperature measurement systems for a honeybee colony corresponding data and pros and cons will be discussed. |
|||||||||||||||||||||||||||||||||||||||||
sciforum-064462 |
Effect of curing on MOD cavities restored with two different composites using two distinct techniques
, , Francesco Riccitiello ,
Niccolò Armogida ,
Luigi Esposito ,
,
Alessandra Valletta
Submitted: 16 Aug 2022 Abstract: Show Abstract |
,
,
Francesco Riccitiello ,
Niccolò Armogida ,
Luigi Esposito ,
,
Alessandra Valletta
|
![]() |
N/A |
Show Abstract |
||||||||||||||||||||||||||||||||||||
Background. It’s well known that polymerization process hides negative aspects such as cuspal deflection mainly caused by shrinkage and temperature rise. Therefore, the purpose of this study was to assess the latter aspects of flowable and packable bulk-fill composites applied to mesio-occlusal-distal (MOD) cavities with bulk-fill or incremental layering technique. Methods.The linear shrinkage and mechanical properties of two bulk-fill composites with different properties (high viscosity and low viscosity) were analyzed with an extensometer and compressive tests. Subsequently, cusp deformation and temperature rise recorded in MOD cavities of first maxillary human premolars restored with both bulk-fill and incremental layering techniques were evaluated. A thermocouple placed 1 mm below the cavity floor was used to measure temperature rise, meanwhile cusp deflection was appreciated with an extensometer. Results.Shrinkage profiles recorder for flowable composite was significantly higher (p<0.5) than that of packable one; in addition, compression tests showed better results for the latter. The cuspal deflection measured in incremental technique was higher than that of bulk-fill technique for both flowable and packable composites. For each composite and technique, a temperature enhancement from 1.4 to 1.7 °C was observed. Conclusions.No significant difference was observed for cusp deflection in both restorative techniques using both composites. Apparently, the higher Young’s modulus of the not very shrinkable packable composite and the lower Young’s modulus of the very shrinkable flowable composite seemed to balance the cusp distance variation. The small temperature rise observed in the present study during curing suggests that the process may be safe for pulp tissue. |
ASEC2022 Live Sessions Recordings
![](/images/registered_only_default_blur.jpg?version=7bc2037bae16cc86ad6a78f687d9e017)
ASEC 2022 Live Session Program
Four live sessions will be held on 5 December 2022 at 2:00 pm, 6 December 2022 at 9:00 am, 13 December 2022 at 9:00 am, and 14 December 2022 at 2:00 pm.
The detailed program is listed below. Please stay tuned with us.
Live Session 1 5 December 2022 at 2:00 pm
Chaired by Prof. Raul Fangueiro and Prof. Andrea Cusano
TIME CET(Central European Time) |
Speaker |
Title |
14:00 - 14:10 |
Prof. Raul Fangueiro and Prof. Andrea Cusano |
Chair: Opening of Webinar |
14:10 - 14:25 |
Dr. Simeone Chianese |
Production of biopolymers from methane: process analysis |
14:25 – 14:40 |
Prof. Dr. Adriana Borriello |
Oxygen-sensing mechanisms and human diseases: from basic research to translational studies |
14:40 - 14:55 |
Prof. Stefania Campopiano |
Fiber optics-based monitoring of thermal ablation of tumors |
14:55 - 15:10 |
Dr. Santosh Kumar |
Plasmon-based optical fiber biosensors for healthcare applications |
15:10- 15:25 |
Prof. Marco Annunziata |
The effects of titanium dental implant surface properties on the occurring and progression of peri-implant diseases |
15:25 - 15:40 |
Discussion and Q&A |
Live Session 2 6 December 2022 at 9:00 am CET
Chaired by Prof. Anuj Sharma and Prof. Raffaele Solimene
CET |
Speaker |
Title |
09:00 - 09:10 |
Prof. Anuj Sharma and Prof. Raffaele Solimene |
Opening of Webinar |
09:10 - 09:25 |
Prof. Dr. Antonio d'Alessandro |
Photonic devices based on liquid crystals for optical communications and sensing with low power consumption |
09:25 – 09:40 |
Dr. Luca Schenato |
Distributed and quasi-distributed optical fiber pressure sensors for water level measurements |
09:40 – 09:55 |
Dr. Patrizio Vaiano |
Lab-On-Fiber technology for real time dose monitoring in High Energy Physics |
09:55 – 10:10 |
Dr. Antreas Theodosiou |
Femtosecond laser inscribed monolithic midIR fiber laser components |
10:10 – 10:25 |
Prof. Dr. Gianrico Spagnuolo |
The emerging role of biomaterials in preserving dental vitality |
10:25 – 10:40 |
Prof. Lucia Bilro |
Water Quality assessment using optical sensors |
10:40 – 10:55 |
Discussion and Q&A |
Live Session 3 13 December 2022 at 9:00 am
Chaired by Prof. Carlos Marques and Dr. Francesco Arcadio
TIME CET(Central European Time) |
Speaker |
Title |
9:00 - 9:10 |
Prof. Carlos Marques and Dr. Francesco Arcadio |
Opening of Webinar |
09:10 - 09:25 |
Prof. Dr. Carlo Trigona |
Overview of Recent Development on Sensors: from emerging approaches to green solutions |
09:25 – 09:40 |
Prof. Dr. Yeon Sik Jung |
Modular fabrication of three-dimensional nanostructures for device applications |
09:40 – 09:55 |
Prof. Evangelos Hristoforou |
Steel Health Monitoring and Rehabilitation in ferromagnetic Steels |
09:55 – 10:10 |
Prof. Olivier Soppera |
Plasmon-induced nanochemistry for sensor applications |
10:10 – 10:25 |
Discussion and Q&A |
Live Session 4 14 December 2022 at 2:00 pm
Chaired by Prof. Maria Pesavento and Dr. Letizia De Maria
TIME CET(Central European Time) |
Speaker |
Title |
14:00 - 14:10 |
Prof. Maria Pesavento and Dr. Letizia De Maria
|
Opening of Webinar |
14:10 - 14:25 |
Dr. Mario Casillo |
Internet of Things and Recommender System: New Approaches for Cultural Heritage Enhancement |
14:25 – 14:40 |
Prof. Dr. Daniele Tosi |
Fiber-optic ball resonator sensors: an opportunity for low-limit biosensing applications |
14:40 - 14:55 |
Dr. Domenico Capriglione |
Overview of measurement techniques for human exposure to electromagnetic fields generated by modern cellular base stations |
14:55- 15:10 |
Prof. Domenico Montemurro |
Nanogap based devices: A platform towards advanced nanoelectronic circuits design |
15:10- 15:25 |
Discussion and Q&A |
Welcome from the Chairs
Welcome from the Conference Chairs of the 3rd International Electronic Conference on Applied Sciences
We are pleased to announce the 3rd International Electronic Conference on Applied Sciences. This international conference, supported by the journal Applied Sciences, unites scientists from different areas to discuss important recent developments in a number of fields. It represents an opportunity to gather an interdisciplinary community to discuss applied sciences. More specifically, after the success of the first two editions, this year’s edition will focus on eleven thematic areas of applied nature sciences:
- Applied Biosciences and Bioengineering (Session A)
- Chemistry and Materials Science (Session B)
- Computing and Artificial Intelligence (Session C)
- Electrical, Electronics and Communications Engineering (Session D)
- Energy Science and Technology (Session E)
- Environmental and Earth Sciences (Session F)
- Mechanical Engineering (Session G)
- Nanotechnology and Applied Nanosciences (Session H)
- Optics and Lasers (Session I)
- Sensors, Instrumentation and Measurement Science (Session J)
- Applied Dentistry and Oral Sciences (session K)
- Student Session (Session L)
- Posters (Session M)
Posters can be presented without an accompanying proceedings paper and will be available on this website during and after the e-conference.
Participants will have the opportunity to examine, explore and critically engage with issues and advances in these areas. We hope to facilitate discussions and exchange within the community.
A student competition will also be held online for selected students' contributions (students as correspondences). These will be exhibited in the Student Session. For more details, please click the following link: https://sciforum.net/event/ASEC2022#awards.
This event will take place entirely online, allowing participation from all over the world with no concerns regarding travel and related expenditures. An electronic conference provides a platform for rapid and direct exchanges about the latest research findings and novel ideas. Participation, as well as the "attendance" of this online conference, is free of charge.
The 3rd International Electronic Conference on Applied Sciences is sponsored by MDPI and the scientific journal Applied Sciences. The conference proceedings papers and presentations will be available on https://sciforum.net/event/ASEC2022 for discussion during 1–15 December 2022 and will be published in the journal Engineering Proceedings.
Extended and expanded versions of conference proceedings papers can be submitted to a Special Issue “Selected Papers from the 3rd International Electronic Conference on Applied Sciences” in the journal Applied Sciences after the conference, with a 20% discount on the Article Processing Charges.
Applied Sciences is an international, peer-reviewed, open access journal on all aspects of applied natural sciences. It is published semimonthly online by MDPI.
We hope the community will share our enthusiasm and help to make this 3rd edition a success, and that there will be many more conferences in the future.
Prof. Dr. Nunzio Cennamo and Prof. Dr. Yangquan Chen
The Chairs of the 3rd International Electronic Conference on Applied Sciences
Event Chairs
![](/events_files/698/committee/8f4758b290095d21f28f793f6d4a817a.png?1723858201)
Department of Engineering, University of Campania Luigi Vanvitelli, Aversa, Italy
![](/events_files/698/committee/49d79f66da08faa3ee4d357dcd499b00.png?1723858201)
Department of Mechanical Engineering (ME), University of California, Merced, CA, USA
Event Committee
![](/events_files/698/committee/eeb820cc80f0b8aa1e47ff8fc3a42278.png?1723858201)
Joint UNC/NCSU Department of Biomedical Engineering, North Carolina State University, Raleigh, NC, USA
![](/events_files/698/committee/2e8558ea3d8f0460e1e5d63ee44cdfc2.png?1723858201)
Electromagnetism and Telecommunication Department, Université de Mons, Mons, Belgium
![](/events_files/698/committee/02bd19c0aee88744ca8837c4bae0b869.png?1723858201)
I3N and Physics Department, Instituto de Telecomunicações, University of Aveiro, Aveiro, Portugal
![](/events_files/698/committee/876cf3a0962cb0465bc8780684d171c5.png?1723858201)
Physics Division, Department of Applied Sciences, National Institute of Technology Delhi, Narela, Delhi, India
![](/events_files/698/committee/ace1c5380f19e83353f6d14f985b5108.jpeg?1723858201)
Department of Chemistry, University of Pavia, Pavia, Italy
![](/events_files/698/committee/e52b88794d2d69e1127dff9d89b448a0.png?1723858201)
RSE S.p.A, Technologies for Transmission and Distribution, Milan, Italy
![](/events_files/698/committee/345104933f2e8aea535eb2a96f4ffd05.png?1723858201)
Department of Engineering, University of Campania Luigi Vanvitelli, Aversa, Italy
![](/events_files/698/committee/e05a3b6aa960c3f632e87cc9cc917ff0.png?1723858201)
Fibrenamics, Institute of Innovation on Fiber-based Materials and Composites, University of Minho, Guimarães, Portugal,
Centre for Textile Science and Technology (2C2T), University of Minho, Guimarães, Portugal
![](/events_files/698/committee/469c430f372d08cfe6c7fd77b0ae1e14.png?1723858201)
Department of Electric, Electronic and Information Engineering, University of Catania, Catania, Italy
![](/events_files/698/committee/e31c282a90da35424fb8561e811217c4.png?1723858201)
Department of Civil Engineering and Architecture, University of Catania, Catania, Italy
![](/events_files/698/committee/c63dacb1ed27e6677d1efd932a91e2ee.jpeg?1723858201)
Department of Engineering, University of Campania “Luigi Vanvitelli”, Aversa, Italy,
IREA-CNR, Napoli, Italy
![](/events_files/698/committee/8b3f0a5667d7f1b802868606260ff503.png?1723858201)
Department of Neuroscience, Reproductive and Odontostomatological Sciences University of Naples "Federico II", Naples, Italy
![](/events_files/698/committee/88b44eeecc16b6583ae21d0a3d012f1b.png?1723858201)
Department of Biotechnology, University of Verona, 37134 Verona, Italy
![](/events_files/698/committee/b203b47e7469517c8c4b660be47d41b1.png?1723858201)
Department of Mechanical Engineering, University of California, Riverside, CA 92521, USA
![](/events_files/698/committee/9bb546b43a3b49ba1fef3f4b63a37e85.png?1723858201)
Instituto de Telecomunicações, Campus Universitário de Santiago, University of Aveiro, 3810-193 Aveiro, Portugal
![](/events_files/698/committee/d22a052565863bd1fb61afe574da1942.png?1723858201)
CREA-Research Centre for Food and Nutrition, Via Ardeatina 546, 00178 Rome, Italy
![](/events_files/698/committee/d54c9e33000f9385a8a0c63996d5dc91.jpeg?1723858201)
DIIn - Dipartimento di Ingegneria Industriale
Università degli Studi di Salerno
Fisciano, Salerno, Italy
![](/events_files/698/committee/9313dae799277bbd21856b956cf643f8.jpeg?1723858201)
Dipartimento di Scienze e Tecnologie, Università degli studi di Napoli “Parthenope”, Centro Direzionale, Isola C4, 80143 Napoli, Italy
![](/events_files/698/committee/49d5ebe1d2e64c4647855d3e9bb3ae89.png?1723858201)
Department of Electrical and Information Engineering, Polytechnic University of Bari, 70126 Bari, Italy
![](/events_files/698/committee/4ca360ffe67cf569b23660bb0e71488a.png?1723858201)
Department of Industrial Engineering, University of Naples Federico II, 80125 Naples, Italy
![](/events_files/698/committee/be17ab618cfb947a3a6021c96287a049.png?1723858201)
University of Campania "L. Vanvitelli", Department of Engineering, Via Roma 29, 81031, Aversa (Italy)
![](/events_files/698/committee/be73c16ddd7847391a29ec913840978f.png?1723858201)
Optoelectronic Group, Department of Engineering, University of Sannio, Corso Garibaldi 107, Benevento, Italy
![](/events_files/698/committee/dee19509a4ac2b6ee294346aeaf9b2c7.png?1723858201)
Dipartimento di Ingegneria, Università degli Studi della Campania, 81031 Aversa, Italy
Invited Speakers
![](/events_files/698/committee/40fb9f1a152b8410d09a6c93722e796a.png?1723858201)
Department of Engineering, University of Campania “Luigi Vanvitelli”, 81031 Aversa, Italy
Live session 1 Production of biopolymers from methane: process analysis
Simeone Chianese, PhD, is an Assistant Professor of Chemical Plants at the Department of Engineering of the University of Campania “Luigi Vanvitelli” (Aversa, Italy). His areas of teaching include technologies for pollution control, waste management and treatment, gaseous emission treatment technologies, risk analysis and contaminated site remediation. His research interests include biomass gasification, supercritical water gasification, catalytic hydrogen production, syngas cleaning, micro-pollutant removal from aqueous streams, advanced wastewater treatment, advanced oxidation processes, innovative technologies for groundwater remediation, innovative technology for biofuel production, microalgal biomass growth and extraction of valuable by-products, CO2 capture through microalgae growth. Recently, he started new research activities for the investigation of hydrogen production at low temperature, pressurized anaerobic digestion and PHB production from biomass. He is co-author of more than 60 papers in international peer-reviewed scientific journals indexed by the main databases (Scopus and/or Web of Science) and more than 30 papers in international conferences.
biopolymers, sustainable production, process optimization
![](/events_files/698/committee/fda2f1d224d187e8bda38e687d6b4880.jpeg?1723858201)
Department of Precision Medicine, University of Campania “L. Vanvitelli”, Naples, Italy
Live session 1 Oxygen-sensing mechanisms and human diseases: from basic research to translational studies
Adriana Borriello (AB) got her Degree in Biological Sciences cum laude in 1991 at the University of Naples 'Federico II'. She obtained the PhD in Cellular Biochemistry in 1999 at the Second University of Naples (SUN), and a Specialty School in Clinical Biochemistry in 2007 (SUN). Since 2015, she is Associate Professor of Biochemistry at University of Campania “L. Vanvitelli, and since 2007, Biology Manager at the Policlinico Hospital (Vanvitelli University). She has obtained the National Scientific Qualification to the functions of Full Professor for the Sector 05/E1 General Biochemistry (31/03/2017). AB teaches Biochemistry at the Degree Course in Medicine and Surgery, based in Caserta, at the Degree Course in Medicine and Surgery in English Language, and at several Specialization Schools (Pediatrics, Nutritional Sciences and Clinical Biochemistry). Further teaching assignments are carried out in numerous Degree Courses for Health Professionals. Since 2008, she participates in the Board Committee of the Biochemical and Biotechnological Sciences PhD Course (Vanvitelli), where she has guided numerous PhD candidates in their researches. Some of them currently occupy a position (type A researchers, RTD-A) at the University of Campania. Reviewer and Editorial Board Member for international journals, such as CELLS, MDPI (IF: 7.7), Diseases (MDPI), Frontiers in Endocrinology and Frontiers in Oncology. Guest Editor for special issues in Cells and in Biosensors (MDPI). The results of her researches have been published in high-impact journals such as New England Journal of Medicine, Translational Oncology, Journal of Biological Chemistry, Journal of Clinical Oncology, Blood, Leukemia, Cancer Research, , Cancer Letters, and others. She is author of about 70 papers, published in peer-reviewed journals. Total IF: 824.237; average IF/paper: 8.8; total number of citations: 2417, H-index: 28 (Scopus).
Oxygen-sensing; protein post-translational modifications; protein level control; genetic diseases; hypoxia response; cell division cycle.
![](/events_files/698/committee/607aa3eadb41bf48a3bd1bc5a46a9b1d.jpeg?1723858201)
Department of Engineering, Universita degli Studi di Napoli Parthenope, Naples, Italy
Live session 1 Fiber optics-based monitoring of thermal ablation of tumors
Stefania Campopiano is Full Professor of Electronics at Department of Engineering, University of Napoli Parthenope. Her main research interests regard the design, realization and testing of novel in-fiber devices in standard and unconventional fibers for sensing applications. Important research outcomes are related to the exploitation of fiber optic sensors for the measurement of a range of physical, chemical, and biological parameters in different fields spanning from the structural health monitoring to the biomedical field.
optical fiber sensors; fiber Bragg gratings; temperature monitoring; structural health monitoring
![](/events_files/698/committee/2e2fbe41a36d3f0c2f234c9c0bcdc90e.jpeg?1723858201)
Shandong Key Laboratory of Optical Communication Science and Technology, School of Physics Science and Information Technology, Liaocheng University, Liaocheng, China
Live session 1 Plasmon-based optical fiber biosensors for healthcare applications
Santosh Kumar received the Ph.D. degree from IIT (ISM) Dhanbad, Dhanbad, India. He is currently an Associate Professor with the School of Physics Science and Information Technology, Liaocheng University, Liaocheng, China. He has guided seven M.Tech. dissertations and six Ph.D. candidates. He has published more than 200 research articles in national and international SCI journals and conferences. He has presented many articles at conferences held in Belgium and USA. He has published two books entitled Fibre Optic Communication: Optical Waveguides, Devices and Applications (University Press, 2017), India, and another book entitled 2D Materials for Surface Plasmon Resonance-Based Sensors (CRC Press, Taylor & Francis Group, 2021). He has reviewed more than 1000 SCI journals of IEEE, Elsevier, Springer, OPTICA, SPIE, and Nature. His current research interests include optical fiber sensors, nano and biophotonics, photonic and plasmonic devices, and waveguide and interferometer. He is a Life Fellow Member of the Optical Society of India (OSI) and a Senior Member of IEEE, OPTICA and SPIE. He is also a Traveling Lecturer of OPTICA. He is also a Chair of Optica Optical Biosensors Technical Group. He has delivered many invited talks and serves as the session chair of IEEE conferences. Currently, he is the guest editor of special issues of Materials Journal (MDPI), Magnetochemistry Journal (MDPI), Photonics Journal (MDPI), Frontiers in Materials Journal and Frontiers in Physics. He is also an Associate Editor of the IEEE SENSORS JOURNAL, IEEE ACCESS, IEEE TRANSACTIONS ON NANOBIOSCIENCE, Frontiers in Physics, and Biomedical Optics Express.
Optical fiber sensors, plasmonic biosensor, nanomaterials, biomolecules, cells, bacteria, nanotechnology and nanophotonics
![](/events_files/698/committee/87bb3ac4b7cac3cce9b864a8a6b8b8bd.png?1723858201)
Multidisciplinary Department of Medical-Surgical and Dental Specialties, University of Campania “Luigi Vanvitelli”, 80138 Naples, Italy
Live session 1 The effects of titanium dental implant surface properties on the occurring and progression of peri-implant diseases
Marco Annunziata, DDS, PhD | Born in Naples in 1979. Degree in Dentistry “cum laude” in 2002 at the University of Naples “Federico II”. Ph.D. degree in “Biomedical Technologies Applied to the Odontostomatological Sciences” in 2005 and Research Fellow from 2006 to 2010 at the University of Campania “Luigi Vanvitelli”. Assistant Professor of Periodontology and Implantology from 2010 and Associate Professor at the same University from 2018. Physician Assistant at the Periodontology and Implantology Unit of the Department of Dentistry from 2011. Active Member and Board Member (General Secretary for 2013-2014) of the Italian Academy of Osseointagration (IAO). Author of book chapters and scientific papers on international peer reviewed journals of periodontology and implantology (50 papers, total citations 1041, H-index 21). Member of the editorial board and reviewer of several international journals. Main research fields: innovative materials and protocols in implant dentistry, periodontal and bone regenerative therapy, in vitro studies on primary periodontal cells and bone marrow mesenchymal stem cells, etiopathogenesis and therapy of periodontal disease.
Titanium; dental implants; surface topography; peri-implantitis
![](/events_files/698/committee/a97292a1971f7acd730d12007f901d4a.jpeg?1723858201)
Dept. of Information Engineering, Electronics and Telecommunications, Sapienza University of Rome, Rome, Italy
Live session 2 Photonic devices based on liquid crystals for optical communications and sensing with low power consumption
Full Professor in Electronics since 2022 teaches the courses of Optoelectronics and Photonics for the Laurea Magistrale in Electronic Engineering and in Nanotechnology Engineering, Electronics and Optical Sensors for Laurea Magistrale (Msc) in Space and Astronautic Engineering. Vice Dean for International programs of the Faculty of Information Engineering, Informatics and Statistics. President of the Electronic Engineering Area Council since 2019. Director of CNIS, Center of Nanotechnologies applied to Engineering of Sapienza since 2018 Scientific responsible of Sapienza Nanotechnology and Nanoscience Laboratory - SNN Lab since 2018 and of the Optoelectronics Laboratory of Department of Information Engineering, Electronics and Telecommunications since 2002. President of IEEE Photonics Society - Italy Chapter since 2020. President of the Italian Liquid Crystal Society since 2010. Senior Member of IEEE and of the Optical Society of America (OSA). Associate Editor of IEEE Photonics Journal from 2015 to 2021 and special issue Editor of OPTICA Optics Express and Molecular Crystals and Liquid Crystals.
integrated optics, optical waveguides, liquid crystals, optical switching, nanodevices, organic materials
![](/events_files/698/committee/0c8454a38630305f45cc55705c3512d7.png?1723858201)
Research Institute for Geo-Hydrological Protection, Consiglio Nazionale delle Ricerche, 35127 Padova, Italy
Live session 2 Distributed and quasi-distributed optical fiber pressure sensors for water level measurements
Luca Schenato received a B.Sc. degree in telecommunication engineering and a Ph.D. in electronic and telecommunication engineering from the University of Padova, Padova, Italy, in 2003 and 2007, respectively. He is currently a Researcher at the Italian National Research Council in Padova, Italy. His current research interests include optical fiber sensors, mainly for geotechnical and geo-hydrological applications, and optical fiber-based devices, about which he authored or co-authored over 100 research papers.
Optical fiber sensors, Distributed Optical fiber sensors, FBG, Pressure, Hydrology
![](/events_files/698/committee/741436f823517ccd846b845a8635dcf4.png?1723858201)
Optoelectronic Division—Engineering Department, University of Sannio, 82100 Benevento, Italy
Lab-On-Fiber technology for real time dose monitoring in High Energy Physics
Patrizio Vaiano received the Bachelor's Degree and the Master's Degree in Electronic Engineering from the University of Naples "Federico II" (Italy) respectively in 2011 and 2013. In January 2018 he obtained a Ph.D. in Information Technologies for Engineering at the University of Sannio, Benevento (Italy), focusing on the development of Lab-On-Fiber devices for biochemical detection with particular attention to long period fiber gratings. Since 2018 he is Postdoctoral research fellow at the Engineering Department of the University of Sannio. His current research activities concern the design and development of optical fiber-based devices for dosimetry, chemistry, biochemistry and environmental sensing applications.
Lab-On-Fiber technology, optical fiber sensors, biosensors, dosimetry, long period gratings
![](/events_files/698/committee/b6568d13ef5fdc86d725dc22d25a3535.jpeg?1723858201)
Femtosecond laser inscribed monolithic midIR fiber laser components
Dr. Antreas Theodosiou is the director and founder of Lumoscribe LTD. He finished his PhD at the Cyprus University of Technology with a specialization in photonics and optical sensors. He holds an MBA and MSc with a specialization in communication systems. His research includes inscription and development of optical sensors using femtosecond laser systems, waveguides, Bragg gratings, Mach-Zehnders, Fabry-Perot cavities, in polymer, silica, and other novel optical materials, and various applications using optical fibre sensors. In addition, has experience working with demodulation algorithms for complicated Bragg gratings spectrums, and fibre lasers. Recently was awarded with the Cyprus Research Award – Distinguished Researcher “Physical Sciences & Engineering” 2021 by the Research and Innovation Foundation and the Cyprus government and 2020 SPIE Community Champion
![](/events_files/698/committee/8411db123993148073b37682d37d51be.png?1723858201)
Department of Neuroscience, Reproductive and Odontostomatological Sciences University of Naples "Federico II", Naples, Italy
The emerging role of biomaterials in preserving dental vitality
Prof. Dr. Gianrico Spagnuolo received a D.D.S. degree and he completed his Ph.D. in Dental Materials Biotechnology at University of Naples “Federico II” (Italy). He had been Visiting Assistant Professor and Adjunct Scientist at the Department of Operative Dentistry and Periodontology at University of Regensburg (Germany). He was associate researcher at Interdisciplinary Research Centre on Biomaterials (CRIB) - University of Naples “Federico II” and he completed the three-year postgraduate program in Oral Surgery at the same University. He has served as Professor of Operative Dentistry at Sechenov University (Russia). Now he is Professor at School of Dentistry - University of Naples “Federico II” spending his time teaching and participating in the faculty practice in Endodontic, Operative Dentistry and Oral Surgery sections. Prof. Dr. Spagnuolo research is focused on the interaction between cell-tissue-materials at molecular and clinical levels.
Dentistry, Endodontcs, Dental materials, Pulp cells
![](/events_files/698/committee/75047d6b2fbec5c2747a68f89e231782.jpeg?1723858201)
Lúcia Bilro, holds a PhD in Physics and a CEBT certificate in entrepreneurship. She is CTO and co-founder of WATGRID, a company with a strong technological and R&D component that includes a proprietary solution for smart, remote, and real time monitoring of wine production process - Winegrid®. She is also Researcher at Instituto de Telecomunicações (IT), board member of Portuguese Optical Society and member of organizing committee of several international conferences. She has supervised several MSc and PhD students and has co-authored >100 scientific papers, 8 book chapters and 8 patents related to sensing technology. Her research interests are optical sensors applied to food industry, liquid quality monitoring and environmental monitoring, IoT and industry 4.0.
![](/events_files/698/committee/d906b914d54404495d7605ccbcbdad93.png?1723858201)
Dipartimento di Ingegneria Elettrica, Elettronica e Informatica, University of Catania, Viale Andrea Doria 6, 95125 Catania, Italy
Overview of Recent Development on Sensors: from emerging approaches to green solutions
![](/events_files/698/committee/d9ed60a4a5726f951adc42fa51760c12.jpeg?1723858201)
Dept. of Materials Science and Engineering, KAIST, Korea
![](/events_files/698/committee/f12e49b852308f4649932400bf590af9.png?1723858201)
Laboratory of Electronic Sensors, School of Electrical and Computer Engineering, National Technical University of Athen, 15780 Athens, Greece
Steel Health Monitoring and Rehabilitation in ferromagnetic Steels
sensors; magnetic materials; biotechnology; structure and properties of materials
![](/events_files/698/committee/9db613088c38f22e1fc6f2c64616ad0e.png?1723858201)
Institute of Material Science of Mulhouse, CNRS UMR7361, 68057 Mulhouse, France
Plasmon-induced nanochemistry for sensor applications
Olivier Soppera is CNRS Research Director (DR1) at the Institute of Materials Science of Mulhouse (CNRS UMR 7361, Université de Haute-Alsace). He leads a research team at IS2M in the field of the development of micro and nanostructuring processes of functional materials by photochemical methods. This approach consists in using light to build and shape matter, in 2D/3D, by integrating functional materials. The approach is multi-scale (from single molecule reactions in near-field photochemistry to the fabrication of macroscopic objects in 3D printing), multi-material (polymer, hybrid, inorganic sol-gel, metallic nanoparticles). This research topic is by essence strongly interdisciplinary between (photo)chemistry, physical chemistry and physics (optics, photonics, electronics) and corresponds to an original positioning in growing field of light-matter interaction. He (co)authored 151 publications in international journals, 7 patents, gave 122 talks in conferences (25 invited talks). He received the CNRS Bronze medal in 2009.
Photochemistry, material science, plasmonic, hybrid materials, sensors
![](/events_files/698/committee/1e4d5d0599ba4f331bdb8d7c5e721ffd.jpeg?1723858201)
Department of Industrial Engineering, University of Salerno, 84084 Fisciano, Italy
Internet of Things and Cultural Heritage: New Approaches for Predictive Maintenance
Mario Casillo is currently an Associate Professor of Computer Science at the University of Salerno, Italy. He received his M.S. degree in Communication Engineering from the University of Naples "Federico II" (Italy), in 1998. He received his Ph.D. in Science and Technology Management from the University of Naples "Federico II" (Italy), in 2016. Since 2018 he is a Postdoctoral research fellow at the Industrial Engineering Department of the University of Salerno and collaborates with the "ICT Center for Cultural Heritage" of the University of Salerno. His current research interests include the Internet of Things, Predictive Maintenance, Recommender systems, Knowledge Management and Machine Learning. In such fields, he is co-author of more than 50 scientific articles, most of which were published in relevant international journals.
Internet of Things and Recommender System: New Approaches for Cultural Heritage Enhancement
![](/events_files/698/committee/b77d17b1530438aa85fce0ebfd02a581.jpeg?1723858201)
1. Department of Computer and Electrical Engineering, Nazarbayev University, Kabanbay batyr, Nur-Sultan 010000, Kazakhstan
2. Laboratory of Biosensors and Bioinstruments, National Laboratory of Astana, Kabanbay batyr, Nur-Sultan 010000, Kazakhstan
Fiber-optic ball resonator sensors: an opportunity for low-limit biosensing applications
Daniele Tosi is an Associate Professor of Electrical and Computer Engineering at Nazarbayev University, and Head of Biosensors and Bioinstruments Laboratory at National Laboratory Astana. He is an Associate Editor of the IEEE Sensors Journal and the recipient of the IEEE Sensors Council Early Career Technical Award in 2018. He holds BSc (2004) and MSc (2006) in Telecommunication Engineering, and PhD (2010) in Electrical and Computer Engineering from Politecnico di Torino. His research interests include optical fiber sensors, biomedical sensors, distributed sensing, and biosensors.
optical fiber sensors; optical fiber biosensors; multiplexed sensors; distributed sensing; optical fibers
![](/events_files/698/committee/72f1de4369752e98b66ff54d8fa94fd3.jpeg?1723858201)
Department of Electrical and Information Engineering, University of Cassino and Southern Lazio, 03043 Cassino, Italy
Overview of measurement techniques for human exposure to electromagnetic fields generated by modern cellular base stations
Domenico Capriglione is currently an Associate Professor of electrical and electronic measurements with the University of Cassino and Southern Lazio, Italy. He received the M.S. degree (cum laude) in Electronic Engineering from the University of Salerno (Italy), in 2000. His current research interests include measurements on RF and telecommunication systems, DSP-based measurement systems, network measurements, measurement of electromagnetic compatibility, Instrument Fault Diagnosis. In such fields, he is co-author of more than 150 scientific articles, most of which were published in relevant international journals. Since 2016 is Chair of the IEEE Instrumentation and Measurement Society Technical Committee 37 - Measurements and Networking. This TC has been selected as Outstanding Technical Committee Award for the year 2019. Since 2022 serves as AE of the IEEE Instrumentation and Measurement Magazine.
spectral measurements; electromagnetic fields; cellular systems; 4G; 5G
![](/events_files/698/committee/7838bbd89bccb13403a05ff428736d24.jpeg?1723858201)
Dipartimento di Fisica, Universitá degli Studi di Napoli Naples Federico II, 00103 Napoli, Italy
Nanogap based devices: A platform towards advanced nanoelectronic circuits design
Domenico Montemurro is currently Assistant professor (RTDA) at department of Physics “E.Pancini”, University of Naples Federico II (Italy). He gained his bachelor and master degree in Physics at University of Salerno (Italy) and University of Naples Federico II (Italy), respectively. He won the PhD position at Scuola Normale Superiore di Pisa - Italy (Alma Mater Prof. Enrico Fermi) developing the projects “A nanotechnological platform for hybrid superconducting nanojunctions based on semiconducting nanowires”. He spent almost four years at Chalmers University of Technology (Sweden) as post doc researcher conceiving the experiments, nanofabricating and characterizing at very low temperature (~10mK) and at high magnetic field (~14T) several layouts of nanostructures. Currently, at Naples University, his researcher activities fit in the field of Quantum Technologies.
nanotechnology, nanostructures, clean-room, superconductivity mesoscopic physics, Josephson junctions, low temperature physics
Sessions
B. Chemistry and Materials Science
C. Computing and Artificial Intelligence
D. Electrical, Electronics and Communications Engineering
E. Energy Science and Technology
F. Environmental and Earth Sciences
G. Mechanical Engineering
H. Nanotechnology and Applied Nanosciences
I. Optics and Lasers
J. Sensors, Instrumentation and Measurement Science
K. Applied Dentistry and Oral Sciences
L. Student Session
M. Posters
Instructions for Authors
Submissions should be submitted by the authors online by registering at https://sciforum.net/conference/ASEC2022, and using the “Submit Abstract” function once logged into system.
- Scholars interested in participating with the conference can submit their abstract (about 200–250 words covering the areas of manuscripts for the proceedings issue) online at this website up to 12 September 2022.
- The Conference Committee will conduct a pre-evaluation, based on the submitted abstract, of whether the contribution from the authors of the abstract will be welcome for the 2nd International Electronic Conference on Applied Sciences. All authors will be notified by 19 September 2022 about the acceptance of their abstract.
- If the abstract is accepted for this conference, the author will be asked to submit a minimum of one of the following: a manuscript, a poster, a slides presentation (in PDF), or a short video presentation (max. 3–5 minutes). This should be ready by the submission deadline of 27 October 2022. If you submit a manuscript, you need to upload the Word and PDF versions in Original files (zip/word) and Manuscript PDF, respectively. If you choose to submit a poster, a slides presentation (in PDF), or a short video presentation (max. 3–5 minutes), please submit the abstract in Word and PDF format in Original files (zip/word) and Manuscript PDF, respectively.
- The manuscripts and presentations will be available on https://sciforum.net/conference/ASEC2022 for discussion and rating during the time of the conference, from 1–15 December 2022.
- All submissions will be reviewed using the powerful text comparison tool iThenticate. This procedure aims to prevent scholarly and professional plagiarism. Submissions will then be peer-reviewed by conference committees. After the conference, the authors may choose to publish them in the MDPI journal Engineering Proceedings (ISSN 2673-4591). Publication of proceedings paper is free of charge.
- The open access journal Applied Sciences will publish a Special Issue (Selected Papers from the 3rd International Electronic Conference on Applied Sciences) of the conference and accepted papers will be published in the proceedings of the conference itself. After the conference, the Conference Committee will select manuscripts that may be included for publication in the Special Issue of the journal Applied Sciences (the submission to the journal is independent from the conference proceedings and will follow the usual process of the journal, including peer-review, APC, etc.).
Proceedings Paper
Proceedings papers must be prepared in MS Word using the Proceedings template (see below) and should be converted to PDF format before submission. The manuscript should count at least 3 pages (incl. figures, tables and references) and should not exceed 6 pages. Carefully read the rules outlined in the 'Instructions for Authors' on the journal website and ensure that your manuscript submission adheres to these guidelines.
Manuscripts for the proceedings issue must have the following organization:
First page:
- Title
- Full author names
- Affiliations (including full postal address) and authors' e-mail addresses
- Abstract (200–250 words)
- Keywords
- Introduction
- Methods
- Results and Discussion
- Conclusions
- (Acknowledgements)
- References
Authors are encouraged to prepare a presentation in PowerPoint or similar software, to be displayed online along with the Manuscript. Slides, if available, will be displayed directly in the website using Sciforum.net's proprietary slides viewer. Slides can be prepared in exactly the same way as for any traditional conference where research results can be presented. Slides should be converted to the PDF format before submission so that our process can easily and automatically convert them for online displaying.
Video Presentations
Authors are also encouraged to submit video presentations. This is an unique way of presenting your paper and discussing it with peers from all over the world. Video should be no longer than 3-5 minutes and prepared with one of the following formats: .mp4 / .webm / .ogg (max size: 250Mb). It should be submitted with the full manuscript before 13 October 2022.
Submission of Manuscripts
Submission: Manuscripts should be submitted online at https://sciforum.net/conference/ASEC2022 by registering and logging in to this website.
Accepted File Formats
- MS Word: Manuscript prepared in MS Word must be converted into a single file before submission. When preparing manuscripts in MS Word, the 3rd International Electronic Conference on Applied Sciences Microsoft Word template file (see download below) must be used. Please do not insert any graphics (schemes, figures, etc.) into a movable frame which can superimpose the text and make layout very difficult.
- LaTeX: Manuscripts prepared in LaTeX must be collated into one ZIP folder (include all source files and images so that the Conference Secretariat can recompile the submitted PDF). When preparing manuscripts in LaTeX, please use the 3rd International Electronic Conference on Applied Sciences LaTeX template files.
3rd International Electronic Conference on Applied Sciences Microsoft Word template file and LaTex template file
ASEC 2022 Word template.docx
ASEC2022_Latex_template.zip
Posters
Posters will be available on this conference website during and after the event. Like papers presented on the conference, participants will be able to ask questions and make comments about the posters. Posters can be presented without an accompanying proceedings paper.
Potential Conflicts of Interest
It is the authors’ responsibility to identify and declare any personal circumstances or interests that may be perceived as inappropriately influencing the representation or interpretation of clinical research. If there is no conflict, please state here “The authors declare no conflict of interest”. This should be conveyed in a separate “Conflict of Interest” statement preceding the “Acknowledgments” and “References” sections at the end of the manuscript. Financial support for the study must be fully disclosed under the “Acknowledgments” section.
Copyright
MDPI, the publisher of the Sciforum.net platform, is an open access publisher. We believe that authors should retain the copyright to their scholarly works. Hence, by submitting a Communication paper to this conference, you retain the copyright of your paper, but you grant MDPI the non-exclusive right to publish this paper online on the Sciforum.net platform. This means you can easily submit your paper to any scientific journal at a later stage and transfer the copyright to its publisher (if required by that publisher).
Event Awards
Best Contribution Award
ASEC would like to award the two best contributions as elected by the conference committee. The Awards will consist of 500 Swiss Francs for each awardee. To join in this award, presentation materials must be submitted. We look forward to posting your contributions.
Best Student Award
The student award will consist of 500 Swiss Francs. This award is for a student who has joined in the online student competition of the ASEC 2022.
Eligibility Requirements:
1. The student themselves should be the corresponding author
2. A scanned copy or photograph of the valid student ID card must be submitted together with the extended abstract
3. Presentation materials must be submitted
If you would like to join in this competition, please submit your work to the Student Session.
Conference Secretaries
Ms. Nicole Lian MDPI Branch Office, Beijing E-mail: asec2022@mdpi.com |
Ms. Elena Shi MDPI Branch Office, Beijing E-mail: asec2022@mdpi.com |
A. Applied Biosciences and Bioengineering
The Section on Applied Biosciences and Bioengineering encourages multidisciplinary research in the field of novel biosciences and biological engineering applications. It spans the full range of bioengineering types, clinical engineering, cardiac bioengineering, neural engineering, system modeling, biosignal processing, health informatics, bioinformatics, bioprocess engineering, biotechnology, biosensors, biomechanics, biorobotics, cardiopulmonary systems engineering, fermentation technology, food technology, and microbiology. The main focus is on novel developments and applications in societally relevant themes.
Session Chair
Prof. Dr. Roger Narayan, Joint UNC/NCSU Department of Biomedical Engineering, North Carolina State University, Raleigh, NC 27695, USA
B. Chemistry and Materials Science
Session Chair
Prof. Dr. Gianluca Cicala, Department of Civil Engineering and Architecture, University of Catania, Catania, Italy
C. Computing and Artificial Intelligence
Following the great advances and global interest in the field of Computer Science, Computing and Artificial Intelligence, this section aims to collect relevant scientific contributions in the broad field of Information and Communication Technologies (ICT), with specific focus on Computing and Artificial Intelligence. The focus of papers published in this section will be on applied research within these topics, but theoretical works are also welcome, if related to possible applications. More specifically, papers dealing with the acquisition, processing, storage and transmission of information are within the scope of this section.
Session Chair
Prof. Dr. Angelo Ciaramella, Dipartimento di Scienze e Tecnologie, Università degli studi di Napoli “Parthenope”, Centro Direzionale, Isola C4, 80143 Napoli, Italy
D. Electrical, Electronics and Communications Engineering
The "Electrical, Electronics and Communications Engineering" section is open to receive high-quality papers on either experimental or theoretical aspects reporting state-of-the-art technology and recent advancements in the field of electrical engineering (electric machines and drives, monitoring, control, power quality, microgrids, renewable energies harvesting), electronics engineering (antennas and radio propagation, electromagnetic compatibility, microwaves, radars and sonar navigation), and communication engineering (connected vehicles, IoT, networking technologies, wireless networks).
Session Chair
Professor Carlos Marques, I3N and Physics Department, Instituto de Telecomunicações, University of Aveiro, Aveiro, Portugal
E. Energy Science and Technology
This Section on Energy Science and Technology invites high quality unpublished multidisciplinary research and review articles on state-of-the-art energy technology. The primary focus is on recently developed energy technology which is clean, sustainable and highly efficient, along with traditional fossil fuel based energy resources. More specifically, we encourage articles in the areas of energy conversion and efficiency, renewable and sustainable energy sources, including their applications, energy storage, and harvesting, energy transportation, smart grid, internet of energy, etc., covering all three major facets of energy in generation, transmission, and distribution.
Session Chair
Dr. Letizia De Maria, RSE S.p.A, Technologies for Transmission and Distribution, Milan, Italy
F. Environmental and Earth Sciences
Session Chair
Dr. Francesco Arcadio, University of Campania "L. Vanvitelli", Department of Engineering, Via Roma 29, 81031, Aversa (Italy)
G. Mechanical Engineering
The Mechanical Engineering Section is open to receive high-quality papers reporting state-of-the-art technology in the fields of solid mechanics, machine design, advanced manufacturing processes as well as other basic phenomena in this field. The section welcomes rudimentary and challenging studies concerning the basic and advanced design of components and structures subjected to in-service loading conditions. Fluid dynamics and thermodynamics are included in this section.
Session Chair
Dr. Salvatore Strano, Department of Industrial Engineering, University of Naples Federico II, 80125 Naples, Italy
H. Nanotechnology and Applied Nanosciences
This section is intended for accounts of works pertaining to nanotechnology or to nanosciences oriented towards applications. More specifically, papers dealing with the production, manipulation or assembly of nanostructures, the construction or characterization of nano-architectures, the design of nanoscale devices, the use of nanoparticles or nanostructures to improve macroscopic properties of materials and systems ... are welcome. By contrast, works focusing on toxicity of nanomaterials, nano-biological research involving living cells, viruses, bacteria ... and works involving bio-ethical issues should be addressed to more specialized journals.
Session Chair
Prof. Dr. Francesco Dell’Olio, Department of Electrical and Information Engineering, Polytechnic University of Bari, 70126 Bari, Italy
I. Optics and Lasers
The section of Optics and Lasers is open to receive high-quality papers reporting state-of-the-art technology in the fields of optics and lasers, which includes non-linear optics such as high-order harmonics, Raman, wave-mixing, multiphoton ionization, as well as other basic phenomena in this field. The section welcomes rudimentary and challenging studies concerning optical devices, such as photonic crystal fibers and micro-scale optics for fabrication of novel optical systems.
Session Chair
Dr. Christophe Caucheteur, Electromagnetism and Telecommunication Department, Université de Mons, Mons, Belgium
J. Sensors, Instrumentation and Measurement Science
Session Chair
Prof. Dr. Bruno Ando, Department of Electric, Electronic and Information Engineering, University of Catania, Catania, Italy
K. Applied Dentistry and Oral Sciences
The session encourages multidisciplinary research in the field of Applied Dentistry and Oral Sciences, including but not limited to the following topics:
clinical dentistry, operative dentistry, implantology, imaging in dentistry, digital dentistry, orthodontics, oral surgery, pedondontics, endodontics, prosthetics dentistry, periodontics, maxillo facial, applied dentistry, dental materials, novel biomaterials, nanodentistry, tissue engineering and regenerative dentistry, wearable devices in dentistry, early diagnosis in dentistry, Artificial Intelligence (AI) in dentistry, e-Health in dentistry, translational research in dentistry, oral medicine
Session Chair
Prof. Dr. Gianrico Spagnuolo, Department of Neuroscience, Reproductive and Odontostomatological Sciences University of Naples "Federico II", Naples, Italy
Show all published submissions (5) Hide published submissions (5)
Submissions
List of Papers (5) Toggle list
L. Student Session
Session Chair
Professor Maria Pesavento, Department of Chemistry, University of Pavia, Via Taramelli 12, 27100 Pavia, Italy
M. Posters
Session Chair
Professor Anuj Sharma, Physics Division, Department of Applied Sciences, National Institute of Technology Delhi, Narela, Delhi 110040, India