The 7th International Electronic Conference on Applied Sciences
The 7th International Electronic Conference on Applied Sciences
Part of the International Electronic Conference on Applied Sciences series
Event's Timezone: Central European Time
14 August 2026
15 September 2026
16 October 2026
16 October 2026
8 December 2026
Biosciences, Artificial Intelligence, Mechanical Engineering, Nanotechnology, Civil Engineering, Energy and Environment, Food Sciences, Chemistry and Materials, Applied Physical Science
Welcome from the Chairs
- Applied Biosciences and Bioengineering;
- Nanosciences, Chemistry and Materials Science;
- Computing and Artificial Intelligence;
- Electrical, Electronics and Communications Engineering;
- Mechanical and Aerospace Engineering;
- Energy, Environmental and Earth Science;
- Food Science and Technology;
- Applied Physical Science.
Professor of Electronics at University of Campania Luigi Vanvitelli, Naples, Italy
The Chair of the 7th International Electronic Conference on Applied Sciences
More News about MDPI Conferences
Event Chair
Department of Engineering, University of Campania Luigi Vanvitelli, Naples, Italy
Nunzio Cennamo was born in Italy in 1975. He received the master degree in Electronic Engineering in 2002 and the PhD degree in Electronic Engineering in 2005, both from the Second University of Naples, Naples, Italy. He is a full Professor in Electronics at the University of Campania Luigi Vanvitelli, Naples (Italy). His research interests include the design and fabrication of optical sensors, chemical sensors, biosensors and optoelectronic devices. He is the author of more than 210 international journal and conference papers and 12 patents. He is cofounder of the Spin Off "MORESENSE srl" in Milan (Fondazione Filarete, Milan - Italy). He is an Associate Editor of “Photonics Research” (OSA), of “Applied Sciences“ (MDPI), and "Sensors" (MDPI). He is an Organizer and General Chair of several Internation Conferences, the “IEEE Sensor Applications Symposium” (SAS 2024), Naples (Italy) July 23-25, “7th International Symposium on Sensor Science” (I3S 2019) 9-11 May 2019, Naples (Italy), and of four editions of the “International Electronic Conference on Applied Sciences” (ASEC 2021, ASEC 2022, ASEC 2023, ASEC 2024). He is a Publicity Chair of two editions (the 6th and 7th) of the “IEEE International Symposium M&N (18-20 July 2022 Padua - Italy and 3-5 July 2024 Rome - Italy). He is several times an Invited Speaker in Webinars, Summer Schools, and International Conferences. He is an Organizer/Chair of several Special Session in International Conferences and a Member of several Scientific Committees. He is a Principal Investigator of several national Projects and Coordinator of the Local Unit of national and international Projects (total budget about 2M Euros).
Centre for Applied Photonics, INESC TEC, Porto, Portugal,
Department of Physics and Astronomy, Faculty of Sciences, University of Porto, Porto, Portugal
Pedro A. S. Jorge holds a PhD in Physics from the University of Porto (2006), following earlier training in Applied Physics, Optoelectronics, and Lasers. He is currently a Senior Researcher and team leader at the Centre for Applied Photonics of INESC TEC. He also serves as an Assistant Professor in the Department of Physics and Astronomy at the Faculty of Sciences of the University of Porto, where he is the Director of the MSc in Physics Engineering. His research focuses on utilizing light-based technologies to sense, monitor, and analyze complex physical, chemical, and biological systems. His specific expertise spans optical fiber sensors, biosensors, laser-based spectroscopy, Laser-Induced Breakdown Spectroscopy (LIBS), spectral imaging, optical instrumentation, and data-driven analytical systems. These technologies are applied across diverse fields, including environmental monitoring, biomedicine, industrial inspection, mineral analysis, aquaculture, and energy-related sensing. Dr. Jorge has led and contributed to a broad portfolio of national and international research projects, encompassing FCT, European, and industry-oriented initiatives. In these projects, he has served as Principal Investigator (PI), Work Package leader, and senior researcher. His recent work focuses on translating photonic concepts into robust experimental platforms and prototypes, frequently developed in close collaboration with academic, technological, and industrial partners. Throughout his career, he has co-authored more than 120 scientific journal publications, contributed to numerous conference communications, and holds several patents in photonic sensing technologies, including licensed intellectual property with translational impact. He is also actively involved in MSc and PhD supervision, scientific community service, conference organization, and providing advanced training in optics, photonics, and applied instrumentation.
Event Committee
National Research & Development Institute for Chemistry and Petrochemistry - ICECHIM Bucharest, Bucharest, Romania
molecularly imprinted polymers; synthesis by polymerization or phase inversion; obtaining films and membranes; sol–gel reactions; covalent immobilization of enzymes on polymers; polymer nanocomposites; hybrid inorganic–organic nanocomposites
Department of Chemistry, Institute of Food Science, Warsaw University of Life Sciences-SGGW, Warsaw, Poland
Department of Engineering, University of Campania "Luigi Vanvitelli", Aversa, Italy
Dr. Alessandro De Luca is an Assistant Professor in Mechanical Engineering at the University of Campania “Luigi Vanvitelli”, Italy. His research covers a broad spectrum of topics in structural mechanics and mechanical design, including Structural Health Monitoring (SHM), crashworthiness, impact and fatigue analysis, residual strength assessment, and the behavior of both composite and metallic structures. He combines advanced numerical modeling techniques with experimental investigations to study damage mechanisms and structural performance under critical loading conditions. Dr. De Luca has coordinated and participated in several national and European research projects, including within the Clean Aviation programme. He is also involved in editorial activities as a reviewer and guest editor for international journals in engineering and materials science.
structural health monitoring; finite element analysis; structural behavior; mechanical design; crashworthiness
Research Center for Active Living and Wellbeing, Polytechnic Institute of Bragança, Santa Apolónia Campus, Bragança, Portugal
Chemistry and food quality; quality control and chemical characterization; sustainable processes and products; chronic kidney disease; renal fibrosis; drinking water quality
Global Innovation Center, Kyushu University, Kasuga, Japan
GaN; HEMT; LED; laser diodes; semiconductors
Institute of Food Sciences, National Council Research, Via Roma, Avellino, Italy
Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal
mechatronics and robotics; 3D printing materials and technologies; multibody dynamics, vibration and damping; smart materials and structures; computational and experimental mechanics; instrumentation and control
Dr. Dmitry Portnikov is an Adjunct Lecturer at Ben-Gurion University of the Negev and at Sami Shamoon College of Engineering in Israel. He holds a Ph.D. in Mechanical Engineering from Ben-Gurion University. His research focuses on particle mechanics and characterization, bulk solids handling, and fluid-particle interactions. He has published 27 peer-reviewed journal articles, presented at over 30 international conferences, and currently serves as a Guest Editor and Topical Advisory Panel Member for Applied Sciences journal.
Particle Mechanics; Granular Materials; Fluid-Particle Interactions; Bulk Solids Handling; Mechanical Characterization of Particles
Dr. Suhir is IEEE, ASME, SPIE and IMAPS Life Fellow, APS, IoP(UK) and SPE Fellow, and AIAA Associate Fellow. He received numerous professional awards. Particularly, he is the third Russian American Scientist, after S. Timoshenko and I. Sikorsky, who received the prestigious ASME Worcester Reed Warner Medal for outstanding contribution to the permanent literature of engineering (and establishing a new discipline – structural analysis of electronic and photonic systems). Ephraim authored and co-authored 500+ publications and enjoys numerous references to his published work.
applied mathematics and mechanics, applied and mathematical physics; materials science and engineering; aerospace electronics and photonics; Design for Reliability (DfR) of electronic, opto-electronic and photonic assemblies, packages and systems; applied
Department of Chemical Engineering, Autonomous University of Madrid, Madrid, Spain
aqueous phase reforming; renewable hydrogen; environmental catalysis; biomass valorization; thermochemical processes; carbon materials
Department of Energy, Information Engineering and Mathematical Models – University of Palermo, Palermo, Italy
Department of Food Science and Technology, University of Patras, Agrinio, Greece
artificial intelligence; computational intelligence; machine learning; genetic/evolutionary algorithms; decision support theory; intelligent information systems; applications of hybrid intelligent information systems for modeling real world time series be
Institute of Automatic Control, Electronics and Electrical Engineering, University of Zielona Góra, Zielona Góra, Poland
control systems; formal verification; Petri nets; model checking; cyber-physical systems
Institute of Applied Mechanics, Poznan University of Technology, Poznan, Poland
Jakub Krzysztof Grabski, Ph.D., Eng., is employed as an Assist. Prof. at Institute of Applied Mechanics, Poznan University of Technology, Poznań, Poland. He holds a Ph.D. in Mechanical Engineering from 2016. His research interests include computational mechanics, corrugated cardboard, fluid mechanics, heat transfer, bioengineering, meshless methods, and inverse problems. He has published more than 30 papers in peer-reviewed journals and around 20 conference papers. Among the awards he has won, one can distinguish Scholarship of the Minister of Science and Higher Education (Poland) for outstanding young scientists 2020 and START 2018 - stipend for young researchers below 30 from the Foundation for Polish Science. Furthermore, he is a member of the Polish Society of Theoretical and Applied Mechanics and the Polish Association for Computational Mechanics.
computational mechanics; corrugated cardboard; fluid mechanics; biomechanics; heat transfer; meshless methods; artificial intelligence; evolutionary algorithms; inverse problems
Department of Technical Thermodynamics, University of Bremen, Bremen, Germany
spectroscopy; combustion; ionic liquid; four-wave mixing; raman; fluorescence; infrared
Coimbra Polytechnic - ISEC, Coimbra, Portugal
Department of Technologies of Computers and Communications, Universidad de Extremadura, Cáceres, Spain
embedded computing; reconfigurable computing; computational intelligence; optimization
Department of Computer Science and Engineering, University of North Texas, Denton, USA
medical image and video analysis; video database; management systems
process analysis and technology development based on virtual representation; numerical analysis of products and processes; optimization of process performance; optimization of production; product deve
Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, Loughborough, UK
Institute of Physical Chemistry Blas Cabrera (IQF), Spanish National Research Council (CSIC), Madrid, Spain
Gain-induced phenomena; nanoparticle arrays
Group of Analysis, Security and Systems (GASS), Universidad Complutense de Madrid (UCM), Madrid, Spain
Department of Mechanical Engineering, Materials Division, National University of Singapore, Singapore
Provost Chair Professor Manoj Gupta was a former Head of the Materials Division of the Mechanical Engineering Department. He did his Ph.D. at the University of California, Irvine, USA (1992), and postdoctoral research at the University of Alberta, Canada (1992). He has worked for about 40 years in the area of metallic materials, with a particular focus on metallic composites of different types. He has taken multiple consultancy work related to failure of materials besides teaching many people in corporate sectors on the same topic. He is currently among the top 1% of researchers as per Stanford’s List, The Universal Scientific Education and Research Network, and ResearchGate. He has published over 720 peer-reviewed journal papers and owns two US patents and two Trade Secrets. His h-index is 89, and his citations are over 29000. He has also co-authored eight books published by John Wiley, Springer, and MRF - USA. A multiple award winner, he actively collaborates/visits Japan, France, Saudi Arabia, Qatar, China, USA, and India as a visiting researcher, professor, and chair professor.
Metals; alloys; composites; processing; bioimplants
Centre for Research in Modelling and Optimization of Multifunctional Systems (CIMOSM), Lisbon School of Engineering (ISEL), Lisbon, Portugal,
Institute of Mechanical Engineering (IDMEC), Lisbon, Portugal
Dr. M. A. R. Loja completed her PhD in Mechanical Engineering at the Instituto Superior Técnico (IST, UTL) and holds a Habilitation in Mechatronics and Energy Engineering from the University of Évora (UEvora) in Automatic Calculation of Structures. She is currently an assistant professor in the Department of Mechanical Engineering at the Instituto Superior de Engenharia de Lisboa (ISEL, IPL). She was also Associate Professor at the Department of Physics at the University of Évora, as well as an Assistant and Adjunct Professor at the Escola Náutica Infante D. Henrique. She is an integrated researcher at the Institute of Mechanical Engineering (IDMEC, IST) and coordinates the Research Center for Modeling and Optimization of Multifunctional Systems (CIMOSM, ISEL). Her main areas of interest include the scientific areas of computational solid mechanics, advanced composite materials, intelligent structures, optimization, and reverse engineering, in which she is the author/co-author of diverse research papers.
composite materials; advanced composites; numerical modeling; structural optimization; reverse engineering
Centre for Environmental and Sea Studies (CESAM), University of Aveiro, Portugal
biotransformation; Oxidative stress; genotoxicity; endocrine disruption; immunotoxicology
Department of Chemical and Environmental Technology, E.S.C.E.T, Rey Juan Carlos University, Móstoles, Spain
Chromatographic and electrophoretic separation techniques; Mass spectrometry; Sample preparation; Microextraction; Chiral separations; Food contaminants; Bioactive compounds; Food Safety; Food Processing; Food Quality
Department of Mechanics, Mathematics and Management, Politecnico di Bari, Bari, Italy
Polytechnic Institute of Setubal (IPS), School of Technology of Setúbal, Setúbal, Portugal
Operations Mangement; Quality Mangement; Design and Analysis of Experiments
quantum cryptography; quantum effects in optical fibers; single- and entangled-photonic state generation and detection; quantum homodyne and heterodyne detection
Department of Agricultural, Food and Forest Science, University of Palermo, Palermo, Italy
Faculty of Geoengineering, Mining and Geology, Wroclaw University of Science and Technology, Wroclaw, Poland
rolling mills; chatter vibrations; condition monitoring; control; underground vehicles; dynamics; mining machines
Department of Food Biochemistry, University of Warmia and Mazury in Olsztyn, Olsztyn-Kortowo, Poland
Influence of modifications on physico-chemical functional properties of milk proteins, especially influence of glycosylation or functional properties of casein; protein and peptide analysis with the HPLC, MS, UV, 2D-PAGE methods; peptidomics of food
Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Chemical Engineering and Biotechnologies, National University of Science and Technology POLITEHNICA Bucharest, Bucharest, Romania
fatigue behavior; additive manufacturing; multiaxial fatigue; damage accumulation; notch effect; low-cycle fatigue
Istituto Nazionale di Alta Matematica (INdAM), Piazzale Aldo Moro, 5, 00185, Rome, Italy
Institute of Systems and Robotics (ISR-UC), Department of Electrical and Computer Engineering (DEEC-UC), University of Coimbra, Coimbra, Portugal
Department of Applied Mathematics, Polytechnic University of Valencia, Camino de Vera, Valencia, Spain
Prof. Samuel Morillas has a BSc in Computer Science from Unvieridad de Granada and a PhD in Applied Mathematics from Universitat Politècnica de València (UPV) in Spain. From 2019 he is a full professor of the Applied Math department at UPV, where he is a member of the Instituto of Pure and Applied Math. His undergraduate teaching includes fundamental algebra and calculus for first-year students and Continuous modeling for the 3rd year students of the Data Science degree. His graduate teaching at UPV concerns fuzzy logic and applications. He has also been an invited professor in a series of Universities: University of Granada (Spain), Rochester Institute of Technology (NY, USA), Chonbuk National University (South Korea), University at Buffalo (NY, USA), Colorado University at Boulder (Co, USA), Harvard University (Massachusetts, USA), University of Edinburgh (UK) and Metropolia University of Applied Sciences (Finland), where he has taught different courses and seminars about fuzzy logic, image processing, and image appearance models. His research has been focused on fuzzy logic and fuzzy metrics both in the theoretical field and, mostly, in their applications. He has developed different solutions based on fuzzy logic and fuzzy metrics for problems in different fields including image processing, color science, and pavement engineering. He has published more than 50 papers in scientific journals and presented more than 70 contributions to scientific conferences.
fuzzy logic; image processing; vision science; perceptual imaging
REQUIMTE/LAQV, School of Engineering (ISEP), Polytechnic of Porto, Porto, Portugal
(bio)sensors; application of functional nanostructured materials; green technologies; new methodologies for (electro)analysis; environmental chemistry; monitoring/biomonitoring
Department of Electrical and Computer Engineering, Virginia Commonwealth University, Richmond, USA
spintronics; straintronics; nanoelectronics
Nagoya Institute of Technology, Nagoya, Japan
photovoltaic device; organic–inorganic hybrid; nanomaterial; thin film; perovskite
Session Chairs
Prof. Dr. Roger Narayan
Department of Materials Science and Engineering, North Carolina State University, Raleigh, USA
Dr. Roger Narayan is a Professor in the Joint Department of Biomedical Engineering at the University of North Carolina and North Carolina State University. He is an author of over three hundred publications as well as several book chapters on processing and characterization of biomedical materials. Dr. Narayan has also edited several books, such as the textbook Biomedical Materials (Springer) and the handbook Materials for Medical Devices (ASM International).
S1. Applied Biosciences and Bioengineering
Prof. Dr. Alberto Jiménez Suárez
Materials Science and Engineering Area, Higher School of Experimental Sciences and Technology, Rey Juan Carlos University, Madrid, Spain
https://gestion2.urjc.es/pdi/ver/alberto.jimenez.suarez
S2. Nanosciences, Chemistry and Materials Science
Dr. Lucia Billeci
Institute of Clinical Physiology Institute, National Research Council of Italy (CNR-IFC), Pisa, Italy
Lucia Billeci received her M.Sc. degree in Biomedical Engineering and Ph.D. degree in Automation, Robotics and Bioengineering from University of Pisa, Italy, in 2004 and 2007 respectively. She is currently a Senior Researcher at the Institute of Clinical Physiology of the National Research Council of Italy (CNR-IFC) in Pisa. She has completed the international Master’s program in “eXplainable Artificial Intelligence in Healthcare Management” in 2024. In 2009 she was Visiting Researcher at The Maastricht Brain Imaging Centre, University of Maastricht, The Netherlands, and in 2010 at the King’s College Hospital, London, UK. Her research activity focuses on the development of biomedical signal and image processing techniques. She is also interested in the application of wearable solutions for non-invasive monitoring of physiological and pathological situations. Moreover, she is interested in the application of machine learning techniques in personalized medicine. She has co-authored 115 scientific papers (h-index: 32, Scopus). She is part of the Editorial Board of Frontiers in Human Neuroscience, Frontiers in Psychology, BMC Neurology and PLOS ONE and she has been Reviewer of more than 40 international journals. The awards obtained by Dr. Billeci during her career include the first prize at the Computer in Cardiology /PhysioNet Challenge 2013 "Noninvasive Fetal ECG". She is Senior Member of IEEE and Secretary of the IEEE CTSoc Consumer Systems for Healthcare and Wellbeing Technical Committee (CSH TC).
S3. Computing and Artificial Intelligence
Assoc. Prof. Alessandro Lo Schiavo
Department of Engineering, University of Campania "Luigi Vanvitelli", Aversa, Italy
Alessandro Lo Schiavo was born in Naples, Italy, in 1972. He received the Laurea degree with honors in Electronic Engineering from the Università degli Studi di Napoli, Naples, Italy, in 1997, and the Ph.D. degree in Electrical Energy Conversion from the Seconda Università degli Studi di Napoli, Aversa (CE), Italy, in 2000. In 2017 he was appointed Associate Professor of Electronics at the Università degli Studi della Campania “Luigi Vanvitelli”, Italy, where he teaches Fundamentals of Microelectronics and Electronic Circuits Design. His current research interests include electronic circuits for energy harvesting, wireless sensor networks and analysis and design of analog circuits. He is the author of more than 100 papers published in high-impact international journals and proceedings of international conferences. He is also the inventor of two PCT patents. Finally, he serves on Editorial Board of the journal “Applied Sciences” (MDPI) and as Academic Editor of the “International Journal of Circuit Theory and Applications” (Wiley).
S4. Electrical, Electronics and Communications Engineering
Dr. Ana Martins Amaro
Department of Mechanical Engineering, Faculty of Science and Technology, and Center for Mechanical Engineering, Materials, and Processes (CEMMPRE), University of Coimbra, Coimbra, Portugal
Professor Ana Martins Amaro is Associate Professor with Habilitation of the University of Coimbra and an integrated Researcher of the Center of Mechanical Engineering Materials and Processes. Published 112 papers in international journals. Has 20 section(s) of books and 4 book(s). Reviewed more than 700 articles for approximately 90 different journals. Works in the area(s) of Structures with emphasis on Mechanical and Biomechanical Engineering. The most frequent publications in the context of scientific research: Finite Element Method; Mechanical and Biomechanical modelling and numerical simulation; Implant Bone Devices; Composite Materials; Composite Structures; Impact; Non-destructive analysis; Biomechanics; Experimental Testing; Additive Manufacturing, Friction stir welding. Member of the standardization committee of CMM - Portuguese Association of Metallic and Composite Construction, being Coordinator of Working Group 3 (GT3) of CT182. She is member of the governing bodies of the Portuguese Society of Biomechanics and of the Portuguese Fracture and Structural Integrity Society.
S5. Mechanical and Aerospace Engineering
Dr. Simeone Chianese
Department of Engineering, University of Campania “Luigi Vanvitelli”, Aversa, Italy
Simeone Chianese is from the Department of Engineering of the University of Campania. His research interest include Bioenergy, Biomass Conversion and Valorization, Sustanable Processes for value-added compound production and Wastewater Treatment.
S6. Energy, Environmental and Earth Science
Dr. Danila Cianciosi
Department of Clinical Sciences, Faculty of Medicine, Polytechnic University of Marche, Ancona, Italy
https://sciprofiles.com/profile/878691
S7. Food Science and Technology
Assoc. Prof. Antonios E. Koutelidakis
Unit of Human Nutrition, Department of Food Science and Nutrition, University of the Aegean, Lemnos, Greece
Antonios Koutelidakis is Associate Professor on Human Nutrition and Director of the Master Program "Nutrition, Well-being and Public Health". He has 70 publications on international journals and 100 announcements in Greek and International Conferences. His scientific interests are focused on bioactivity and bioavailability of functional foods, clinical and epidemiological studies about the effect of nutrition oh disease prevention.
S7. Food Science and Technology
Dr. Cosimo Trono
Institute of Applied Physics "Nello Carrara", CNR-IFAC, Florence, Italy
Dr. Cosimo Trono is currently a Senior Researcher at the Institute of Applied Physics "Nello Carrara" of the National Research Council in Florence, Italy. His research activity is focused on optics and photonics and sensor science. Moreover, he has developed a research line in optical fiber-based sensing and biosensing. In particular, he has a consolidated experience in the design, fabrication and application of fiber grating based sensing devices and microfluidic systems for optical sensors. He is currently contract professor for the University of Florence with the course “Optoelectronic systems” and he has been lecturer at national and international schools and workshops. He is coordinator and research unit leader in several national research projects and he has been coordinator of an India-Italy joint research project. He is the author of more than 150 scientific publications in peer reviewed journals, books and conference proceedings and he is inventor of two international patents.
S8. Applied Physical Science
Sessions
S2. Nanosciences, Chemistry and Materials Science
S3. Computing and Artificial Intelligence
S4. Electrical, Electronics and Communications Engineering
S5. Mechanical and Aerospace Engineering
S6. Energy, Environmental and Earth Science
S7. Food Science and Technology
S8. Applied Physical Science
Instructions for Authors
The 7th International Electronic Conference on Applied Sciences will accept abstracts only. The accepted abstracts will be available online on Sciforum.net during and after the conference.
An abstract acceptance email only confirms that your abstract has been accepted. Oral or poster presentation invitations are determined separately by the conference chairs, and you will receive an additional email with the presentation result.
Abstract submissions should be completed online by registering with www.sciforum.net and using the "Submit Abstract" function once logged into the system. No template is required.
Abstract Requirements
1. Types of Submissions
- Accepted: Original research abstracts; systematic reviews or meta-analyses abstracts (must comply with PRISMA 2020).
- Not accepted: Narrative, scoping, comparative, perspective, opinion, or essay-style reviews.
2. Content Requirements
- Length: 200–300 words.
- Structure: Introduction, Methods, Results, Conclusions.
- Language: Clear, publication-ready English.
- Originality: Must be original and unpublished; previously published abstracts will not be considered.
3. Authorship
All listed authors must have made substantial contributions to the work, participated in drafting or critically revising the abstract, and approved the final version. The submitting (presenting) author is responsible for ensuring that all co-authors have reviewed and approved the submission, including its content and authorship order.
Requests for changes to authorship (including the addition, removal, or reordering of authors) after submission must be submitted using a signed Authorship Change Form, with written consent from all affected authors. Such requests are subject to review and approval by the Conference Organizing Team. All authors share collective responsibility for the accuracy, integrity, and ethical compliance of the submitted work.
Authors may submit up to five abstracts. Any submissions beyond this limit will be withdrawn. Additionally, only one abstract per author may be selected for an oral presentation.
2. Only live presentations are accepted.
3. Presenters who do not attend the live session will not be eligible for awards or presentation certificates.
Oral Presentation and Slides Preparation
The slot for the oral presentation is 15 mins. We advise that your presentation lasts for a maximum of 12 mins, leaving at least 3 mins for the Q&A session.
Authors are encouraged to prepare presentations using PowerPoint or equivalent software for online display alongside their abstract. If provided, slides will be presented directly on the conference website via the Sciforum.net slide viewer and should be prepared in the same format as a traditional conference presentation of research results. All slides must be converted to PDF format prior to submission to ensure accurate online display.
Each presentation should:
- Communicate the research question or objective, methodology, key results, and scientific novelty;
- Use a clear and logical structure, typically Introduction-Methods-Results&Discussion structure (IMRaD) or a field-appropriate alternative;
- Emphasize the relevance of the work;
- Support key findings with clear figures or tables where appropriate;
- Conclude with a critical interpretation of the results and their impact.
Posters should be designed to allow independent understanding of the research and clearly present the essential elements of the study.
Each poster should include:
- Title, authors, affiliations, and contact details (clearly displayed at the top);
- Brief introduction outlining the research objective;
- Concise methodology summary;
- Main results, supported by clear, well-labeled figures or tables where appropriate;
- Short conclusion summarizing key findings and their relevance.
Technical specifications:
Dimensions (cm): 84.1 × 118.9 (A0 - portrait)
Resolution:300 dpi
Pixel size (portrait, 300 dpi):9933 × 14043 px
Minimum font size:≥24
The poster template can be downloaded HERE. We will reach out to you closer to the dates of the conference with more information.
Note: The uploaded poster may be used as provided and serves as a reference. However, as long as the technical specifications are followed, scholars are welcome to use any poster template of their choice.
Any request concerning abstract or proceedings paper withdrawal should be communicated to the Conference Organizing Team as early as possible, preferably prior to final acceptance and confirmation of the conference program. Please note that once abstracts are published in the Conference Report or once Proceedings papers are published in the Proceedings journal and assigned a DOI, they become part of the permanent scholarly record and cannot be fully removed.
AI Policy
The responsible use of generative AI tools in the preparation of abstracts, posters, and presentations is permitted; however, any such use must be clearly disclosed, specifying the tool employed and its role. Authors retain full responsibility for the accuracy and integrity of their work.
Potential Conflicts of Interest
Authors must disclose any financial, professional, or personal relationships that could reasonably be perceived as influencing the integrity, interpretation, or presentation of their work. Failure to provide accurate disclosures may result in the removal of the abstract from the conference program and associated publications.
If there is no conflict, please state "The authors declare no conflicts of interest." This should be conveyed in a separate "Conflict of Interest" statement preceding the "Acknowledgments" and "References" sections at the end of the manuscript. Any financial support for the study must be fully disclosed in the "Acknowledgments" section.
--------
1. Copyright Ownership
In accordance with Swiss copyright law, you, as the author, are the original creator of your work and retain full copyright ownership of your submitted abstract.
2. License Grant
By submitting your abstract for publication on the Sciforum.net platform, you grant MDPI, the platform’s publisher, a worldwide, royalty-free, non-exclusive license to:
- Publish, reproduce, and distribute the abstract online.
- Make the abstract publicly available in connection with the conference.
3. Author’s Retained Rights
This license is non-exclusive. As you retain full copyright, you are free to:
- Reuse, republish, and build upon your work in any way.
- Develop the abstract into a full paper for submission to other journals or publications.
- Enter into subsequent agreements, including granting an exclusive license or transferring copyright to another publisher for a future version of the work.
4. Author’s Responsibility
You remain solely responsible for complying with the policies of any other journal or publisher to which you may submit a subsequent version of your work, particularly concerning prior publication rules. MDPI and Sciforum.net bear no responsibility for any conflicts arising from your future submissions.
Registration
When registering, please provide us with your institutional email address. This will accelerate the registration process. If you are registering several people under the same registration, please do not use the same email address for each person, but their individual institutional email addresses. Thank you for your understanding.
Registration Categories
Paid Registration
Paid registration provides full access to the conference program and associated benefits, including:
- Abstract submission;
- Eligibility for event awards competition (if applicable);
- Certificate of Presentation or Participation;
- 20% Discount on APC of conference's Special Issue, published in Applied Sciences (all submissions undergo MDPI’s standard peer-review process);
- Complimentary publication in Engineering Proceedings (all submissions undergo MDPI’s standard peer-review process).
|
Early Bird Until 16 October 2026 |
Regular Until 8 December 2026 |
Supported documents | |
|---|---|---|---|
| Authors, Reviewers, Editorial Board Members, Topical Advisory Panel Members, Review Board Members, Guest Editors | 30.00 CHF | 50.00 CHF | |
| Student | 30.00 CHF | 50.00 CHF |
Please upload the front and back of your valid Student lD card. |
| Academic | 50.00 CHF | 70.00 CHF | |
| Non-academic | 100.00 CHF | 150.00 CHF |
| Supported documents | |
|---|---|
| Conference Chairs, Session Chairs, Committee Members of the Conference, Keynote Speakers, Invited Speakers, MDPI Guests |
Please upload your invitation email. |
Active discounts
Group of 3: 5% discount
Group of 5: 10% discount
Group of 10: 15% discount
Note: Group size refers to the number of registered attendees in the same registration order.
Cancellation policy
| > 2 weeks before the conference | Full refund |
| < 2 weeks before the conference | No refund |
Disclaimer
We will endeavour to present the program advertised. However, MDPI and its partners reserve the right to alter or cancel, without prior notice, arrangements, timetables, plans, or other items relating directly or indirectly to the 7th International Electronic Conference on Applied Sciences. MDPI and its partners are not liable for any loss or inconvenience caused as a result of such cancellation.
Beware of Unauthorized Registration
Note that Sciforum is the only official registration platform to register to ASEC 2026. Beware that entering into financial agreements with non-endorsed companies can have costly consequences.
Insurance
The organizers do not accept liability for personal accident, loss, or damage to private property incurred as a result of participation in the event.
Payment methods
Wire transfer, Credit card
Currencies accepted by this event
Swiss francs (CHF) , Euros (EUR) , US dollars (USD) , Pounds sterling (GBP) , Japanese yen (JPY) , Canadian dollars (CAD) and Singapore dollars (SGD)
Publication Opportunities
- Applied Sciences Journal Publication
Participants in this conference are cordially invited to contribute a full manuscript to MDPI Journal Applied Sciences (ISSN: 2076-3417; Impact Factor: 2.9), with a 20% discount on the publication fee. Conference discounts cannot be combined with reviewer vouchers. All submitted papers will undergo MDPI’s standard peer-review procedure. The abstracts should be cited and noted on the first page of the paper.
- Proceeding Paper Publication
Authors of accepted abstracts are highly encouraged to submit an extended proceeding paper (ideally 4–8 pages in length) for the conference's dedicated proceedings volume in the Engineering Proceedings (SCOPUS Indexed; ISSN: 2673-4591) for free, please submit it after the conference.
Proceedings submission deadline: 25 January 2027.
Please click HERE to submit your proceeding paper to Engineering Proceedings, and be sure to disclose the conference information in your cover letter or mention the conference name in your submission.
eng_proceedings paper template.docx
Publication Notice: Proceeding papers will undergo peer-review procedure. Acceptance at the conference does not ensure final publication.
Event Awards
To acknowledge the support of the conference's esteemed authors and recognize their outstanding scientific accomplishments, we are pleased to announce that the conference will provide 8 awards including the Best Oral Presentation Award and Best Poster Award.
The Awards
Number of Awards Available: 8
- Best Oral Presentation Award
Eligibility: Open to all authors selected as oral speakers who have delivered their presentation. Failure to present, delegation of the presentation to another person, or use of AI-generated voice or similar substitutes will result in disqualification.
Criteria: Evaluation considers scientific rigor (clear, literature-supported research question or hypothesis, appropriate methodology, robust analysis and critical discussion of the results), IMRaD/field-appropriate structure, clarity of presented data (clear, well-labeled figures and tables), presentation skills and audience engagement, demonstrated scientific novelty and impact.
Prize: A prize of CHF 300 and a certificate in recognition of your outstanding contribution.
- Best Poster Award
Eligibility: Open to all authors who have presented their work through posters. Failure to present, delegation of the presentation to another person, or use of AI-generated voice or similar substitutes will result in disqualification.
Criteria: Evaluation considers scientific rigor (clear, literature-supported research question or hypothesis, appropriate methodology, robust analysis, and critical discussion of the results), IMRaD/field-appropriate structure enabling independent understanding, clarity of presented data (clear, well-labeled figures and tables), presentation skills (if orally presented), demonstrated scientific novelty and impact.
Prize: A prize of CHF 300 and a certificate in recognition of your outstanding contribution.
Winner Announcement: The award winners will be evaluated and selected by the scientific committee after the conference. Results will be announced on the website and all winners will be individually contacted via email.
Sponsors and Partners
For information regarding sponsorship and exhibition opportunities, please click here.
Organizers
Media Partners
Conference Secretariat
Ms. Ann Li
Ms. Riley Liu
Email: asec2026@mdpi.com
For inquiries regarding submissions and sponsorship opportunities, please feel free to contact us.
