Program Overview
Program Overview
IOCME 2026 Program - Day 1
Session 5. Additive Manufacturing
Date: 12 October 2026 (Monday)
Time: 9:00 (CEST, Basel) | 03:00 (EDT, New York) | 15:00 (CST Asia, Beijing)
| Time (CEST) |
Speaker | Title |
|
09:00-09:10 |
Prof. Dr. Antonio Riveiro Rodríguez |
Opening Remarks from the Event Chair |
| 09:10-09:20 | Prof. Dr. Abdollah Saboori Session Chair |
Welcome from the Session Chair |
| 09:20-09:45 | Dr. Amir Behjat Invited Speaker |
Unraveling the Process-Structure-Property Relationships of Ti-6Al-2Sn-4Zr-2Mo Fabricated via Advanced Direct Additive Manufacturing Technologies |
| 09:45-10:00 |
Zechen Wang |
Comparison of the Wear and Corrosion Resistance of 17-4PH Manufactured by SLM and Micro-SLM |
|
10:00-10:15 |
Mohammadamin Nouri Uoshanloei Selected Speaker |
Electrochemical Behavior of Additively Manufactured AISI 316L Under Simulated Inflammatory Conditions |
| 10:15-10:30 |
Lei Liu |
Microstructural Inhomogeneity and Its Homogenization by Heat Treatment in WAAM ER410 Martensitic Stainless Steel |
| 10:30-10:45 | Pranjal Dixit Selected Speaker |
Effect of Inter-Layer Cooling Strategy on Thermal History, Solidification Behaviour and Microstructural Evolution in Wire Arc Additive Manufacturing of Inconel 625 |
| 10:45-11:00 |
Danilo Abílio Corrêa Gonçalves |
Study of Energy Density and Substrate Roughness for In Situ Ni–Ti Alloy Formation by Laser Powder Bed Fusion |
| 11:00-11:25 |
Dr. Yahya Aghayar |
To be announced |
| 11:25-14:00 | Break |
Session 6. Computational Metallurgy, AI, and Multiscale Modeling
Date: 12 October 2026 (Monday)
Time: 14:00 (CEST, Basel) | 08:00 (EDT, New York) | 20:00 (CST Asia, Beijing)
| Time (CEST) |
Speaker | Title |
|
14:00-14:10 |
Prof. Dr. Ernst Gamsjäger Session Chair |
Welcome from the Session Chair |
| 14:10-14:40 | Prof. Dr. Meghuai Wu Keynote Speaker |
Volume-Averaged Modelling of Multiphase Flow Phenomena During Alloy Solidification |
| 14:40-15:05 | Dr. Manfred Wiessner Invited Speaker |
From Physics-Based Synthetic Data and Bayesian Inversion to LLM-Driven Quality Assurance |
| 15:05-15:20 | Sonia Sharmin Selected Speaker |
Physical Interpretation of Principal Component Modes in Mössbauer Spectra of Iron-Based Metallic Systems |
| 15:20-15:35 | Taimo Priinits Selected Speaker |
Beyond the Limits of Chemical Dynamics: Modeling How Sn Atoms Are Incorporated into and Distributed Throughout the Nb Metal Lattice to Form a Symmetrical, Homogeneous Nb₃Sn Alloy with a Cubic Crystal Structure |
| 15:35-15:50 | János Bátorfi Selected Speaker |
Examination of the Particle-Affected Deformation Zone in Polycrystalline Materials |
| 15:50-16:05 | Amir M. Horr Selected Speaker |
Exploring Data Science in Metal Processes: Data Model Performance and Challenges |
| 16:05-16:20 | Ehsun Saeed Selected Speaker |
AI-Driven Automated Metallography Analysis Platform (AMP): Accelerating Microstructural Characterisation Through Computer Vision and Explainable AI |
IOCME 2026 Program - Day 2
Session 1. Design and Characterization of Novel Metallic Materials
Date: 13 October 2026 (Tuesday)
Time: 9:00 (CEST, Basel) | 03:00 (EDT, New York) | 15:00 (CST Asia, Beijing)
| Time (CEST) |
Speaker | Title |
|
09:00-09:10 |
Prof. Dr. Eric Hug Session Chair |
Welcome from the Session Chair |
| 09:10-09:40 | Prof. Dr. Javier S. Blázquez Gámez Keynote Speaker |
The MnCo(Fe)Ge(Si) Mechanically Alloyed System: From Amorphous to Martensite/Austenite Phases and High-Entropy Alloys |
| 09:40-10:05 | Prof. Dr. Clément Keller Invited Speaker |
Loading-Path Dependence of Grain-Scale Interaction Mechanisms in Heterogeneous Bimodal AISI 316L Microstructures |
| 10:05-10:20 |
Thomas Lindner |
Influence of Manganese Content on Phase Formation and Wear Resistance in Precipitation-Forming Work-Hardening Steels |
| 10:20-10:35 | Krasimir Kolev Selected Speaker |
Effect of Tantalum Content on Structural Evolution and Nanomechanical Properties of TiZrVNb1-xTax (x= 0.1; 0.15; 0.2) High-Entropy Alloys |
|
10:35-10:50 |
Ayman Elemam |
Effect of Ti Addition on the Density–Hardness Trade-Off and Microstructure of Ball-Milled 316L Stainless Steel |
| 10:50-11:05 | Bunyamin Cicek Selected Speaker |
Microstructural and Hardness Investigation of Basalt Fiber-Reinforced Aluminum Matrix Composites Produced by Powder Metallurgy |
| 11:05-11:20 |
Barac Sarac |
Property Comparison of Rheocasting and Die Casting Components |
| 11:20-14:00 | Break |
Session 7. Metals Processing
Date: 13 October 2026 (Tuesday)
Time: 14:00 (CEST, Basel) | 08:00 (EDT, New York) | 20:00 (CST Asia, Beijing)
| Time (CEST) |
Speaker | Title |
|
14:00-14:10 |
Prof. Dr. João Pedro Oliveira Session Chair |
Welcome from the Session Chair |
| 14:10-14:40 | Dr. Wei Xiong Keynote Speaker |
Materials Design in Additive Manufacturing through ICME-Guided Multi-Material Printing |
| 14:40-15:10 | Prof. Dr. Nima Haghdadi Keynote Speaker |
Hot Deformation and Dynamic Recrystallization Mechanisms in Multi-Phase Steels |
| 15:10-15:25 | Beata Smyrak Selected Speaker |
Influence of Strain Hardening and Precipitation Sequences on the Mechanical and Electrical Properties of Al-Mg-Si Alloy Wires |
| 15:25-15:40 | Muhammad Farooq Saleem Selected Speaker |
Room-Temperature Deformation and Microstructure Changes in Ti-6Al-4V under High Strain Rates |
| 15:40-15:55 | Vasilis Loukadakis Selected Speaker |
Impact of Cooling Rate and Impurity Content on Phase Formation and Segregation in 42CrMo4 Steels |
| 15:55-16:10 | Antonio Vidal Crespo Selected Speaker |
Thermal Stability and Memory Effect in Mn(Co,Fe)(Ge,Si) Caloric Alloys |
| 16:10-16:25 | Giulio Timelli Selected Speaker |
Numerical Simulation of Fluid Flow, Solidification and Casting Defects of a Gas Control Valve Produced by High-Pressure Die Casting |
IOCME 2026 Program - Day 3
Session 2. Sustainability in Metals
Date: 14 October 2026 (Wednesday)
Time: 9:00 (CEST, Basel) | 03:00 (EDT, New York) | 15:00 (CST Asia, Beijing)
| Time (CEST) |
Speaker | Title |
|
09:00-09:10 |
Prof. Dr. Azmah Hanim Binti Mohamed Ariff Session Chair |
Welcome from the Session Chair |
| 09:10-09:40 | Prof. Dr. Dong-Won Jung Keynote Speaker |
Incremental Sheet Forming for Sustainable Metal Manufacturing: Achievements, Open Problems, and the Role of Artificial Intelligence |
| 09:40-10:05 | Prof. Dr. Ayşegül Ülkü Metin Invited Speaker |
Re-thinking Sustainability in Metals: Biogenic Routes to Metallic Nanoparticles |
| 10:05-10:20 |
Sena Nur Köksal |
In Situ Green Synthesis of Metal Oxide Nanoparticles Using Onion Peel |
| 10:20-10:35 | Ashmalina Rahman Selected Speaker |
OpenCOSMO-RS-Guided Development of Deep Eutectic Solvents for Zinc Extraction from Tyre-Derived Carbon Black |
|
10:35-10:50 |
Paraskevi K. Askouni |
Structural Steel Systems versus Mixed RC–Steel Buildings: A Seismic Performance Study under Strong Ground Motions |
| 10:50-11:05 | Heet Patel Selected Speaker |
Aluminum Recovery from Industrial Spent Catalyst |
| 11:05-11:20 |
Nouhaila Ferraa |
Electrochemical Evaluation of Octacalcium Phosphate as a Green Corrosion Inhibitor in 1.0 M HCl |
| 11:20-14:00 | Break |
Session 4. Metallic Biomaterials
Date: 14 October 2026 (Wednesday)
Time: 14:00 (CEST, Basel) | 08:00 (EDT, New York) | 20:00 (CST Asia, Beijing)
| Time (CEST) |
Speaker | Title |
|
14:00-14:10 |
Prof. Dr. Silvia Spriano Session Chair |
Welcome from the Session Chair |
| 14:10-14:40 | Prof. Dr. Sara Ferraris Keynote Speaker |
Surface Modification of Metallic Biomaterials: Tailoring Reactivity and Biological Response from Bioactivity to Biodegradation and Infection Control |
| 14:40-15:10 | Prof. Dr. Alex Lanzutti Keynote Speaker |
Critical Aspects of Fatigue Performances in Metals Used for Human Implants |
| 15:10-15:25 | Elena Aldisovna Bolshevich Selected Speaker |
Influence of Oxidation Temperature on Surface Morphology and Corrosion Resistance of a Biocompatible Cast TiNi-Based Alloy |
| 15:25-15:40 | Carlos Roberto Grandini Selected Speaker |
Advanced β-Type Titanium Alloys and MAO Surface Functionalization for Biomedical Applications |
Session 3. Metals for Energy, Mobility, and Emerging Technologies
Date: 14 October 2026 (Wednesday)
Time: 15:40 (CEST, Basel) | 09:40 (EDT, New York) | 21:40 (CST Asia, Beijing)
| Time (CEST) |
Speaker | Title |
|
15:40-15:50 |
Dr. Paulo Tavares Session Chair |
Welcome from the Session Chair |
| 15:50-16:20 | Dr. Nikolai Kashaev Keynote Speaker |
Fatigue Life Prediction and Enhancement of Laser-Processed Ti-6Al-4V in the High-Cycle Fatigue Regime |
| 16:20-16:45 | Prof. Miroslav Zetek Invited Speaker |
Advanced Metal 3D Printing and Topology Optimization of Structural Components for Next-Generation Machining |
| 16:45-17:00 | Ali Farsiabiemameh Selected Speaker |
Tailoring Ni–Al Powder Composition by Ultrasonic Atomization |
| 17:00-17:15 | Anoop Gupta Selected Speaker |
Influence of Heating Rate on Reinforcement Degradation during Spark Plasma Sintering of Solid Lubricant-Reinforced Copper Composites |
| 17:15-17:25 | Prof. Dr. Antonio Riveiro Rodríguez The Event Chair |
Closing Remarks from the Event Chair |