Major types of internal can coatings used for food and beverages are made from epoxy-based resins, which contain among their components bisphenol A (BPA) or bisphenol A diglycidyl ether (BADGE). These components can be released and reach the food. There is no specific European legislation for coatings, but there is legislation on specific substances setting migration limits. Many investigations have paid attention to BPA due to its classification as endocrine disruptor, however, studies are available concerning other analogues developed to replace it in the manufacture of these resins [1].
Ten cans of beverages were taken as study samples. The type of coating was verified using an attenuated total reflectance-FTIR spectrometer showing that most of the samples examined were coated with epoxy-phenolic resins.
The objective of the present work was to apply an analytical method based on high performance liquid chromatography with fluorescence detection (HPLC-FLD) to the simultaneous identification and quantification of fourteen compounds including bisphenol analogues (BPA, BPB, BPBP, BPC, BPE, BPF, BPG) and BADGEs (BADGE, BADGE.H2O, BADGE.2H2O, BADGE.HCl, BADGE.2HCl, BADGE.H2O.HCl, cyclo-di-BADGE) in the material (cans) and in the beverage samples. For this, the cans were extracted with acetonitrile for 24 hours at 70 ºC and the extract was analyzed directly, as well as the content of the cans. This method showed an adequate linearity (R2>0.9994) and low detection levels down to 5 µg/L. In addition, a liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) method was optimized for confirmation purposes.
This research was funded by the Ministerio de Ciencia, Innovación y Universidades, by Fondo Europeo de Desarrollo Regional (FEDER), and by Agencia Estatal de Investigación Ref. No. PGC2018-094518-B-I00 “MIGRACOATING” (MINECO/FEDER, UE).
References
[1] Lestido Cardama A. et al., Polymers 11 (2019) 2086.
Thank you for your excellent presentation. It is increasingly important to continue developing methods for the quantification of chemicals of concern, which you have clearly demonstrated and with very good sensitivity. It is also very reassuring that the cans tested complied with the regulations. A very well executed and presented study.
