Please login first
Study on structural, morphological and optical characteristics of spinel chromites: MCr2O4 (M= Co, Cu & Ni) synthesized via sol–gel process
, , *
1  Department of Applied Sciences and Humanities, Madras Institute of Technology (MIT), Anna University, Chennai-44, India
Academic Editor: José Luis Arias Mediano

Abstract:

The influence of M site substitution on the properties of MCr2O4 nanoceramics is examined in this research. This study is an attempt to correlate the structural, morphological and optical properties of M site-modified chromites. The MCr2O4 nanoceramics-CuCr2O4, CoCr2O4 and NiCr2O4 were synthesized by a wet-chemical sol–gel auto-combustion method, and were annealed for 4 hours at 900℃. X-ray diffraction investigation revealed that the XRD pattern of CuCr2O4 matched with ICSD reference no. 00-034-0424, which confirmed the formation of a tetragonal structure, and the XRD pattern of CoCr2O4 and NiCr2O4 matched with JCPDS card no. 04-0763 and 89-6615, respectively, which confirmed the single-phase cubic crystal structure with space group Fd-3m. The crystallite sizes calculuated from the Scherrer equation were found to be 9.86nm, 6.73nm and 10.73nm for CuCr2O4, CoCr2O4 and NiCr2O4, respectively. Other parameters, including crystal structure, micro strain, lattice constant, unit cell volume, X-ray density, packing factor, and stacking fault of the calcined powder samples, were determined from data acquired from the X-ray diffractometer. Energy dispersive X-ray spectroscopy (EDX) was employed to confirm the appropriate chromite elements in their expected stoichiometric proportions were free of other impurities. Identification of the functional groups of the samples was performed using Fourier Transform Infrared Spectroscopy (FTIR). The absorption bands characteristic of the tetrahedral and octahedral coordination compounds of the spinel structure were found between 450 and 750cm-1 for all 3 samples in the spectrum. From the UV-absorption spectra, using Tauc’s plot, the energy bandgap values for CuCr2O4, CoCr2O4 and NiCr2O4 were measured to be 1.66 eV, 1.82 eV and 2.01 eV, respectively. The dielectric properties of the chromites were studied using an LCR meter. Frequency-dependent dielectric properties, including Dielectric constant and Tangent loss, were calculated. These findings suggest the feasibility of the synthesized chromites for optical devices and other optoelectronic applications.

Keywords: nanoceramics; chromites; energy bandgap; dielectric properties

 
 
Top