Surface functionalization of polymers plays a crucial role in enhancing key properties such as wettability, frictional behaviour and resistance to mechanical wear. Polydimethylsiloxane (PDMS) is a widely used polymer in microfluidics and biomedical applications due to its excellent biocompatibility, optical transparency and ease of processing. A common approach to tailoring its surface morphology and consequently its wettability is soft lithography. However, the fabrication of the moulds required for this technique is often time-consuming and resource-intensive.
In this study, we present a scalable strategy based on femtosecond laser micromachining to fabricate textured aluminium (AA2024) moulds for replicating PDMS surfaces with tunable hydrophobic behaviour. The moulds were laser-textured using a TruMicro Femto Laser system (Trumpf GmbH, Ditzingen, Germany) to create grid structures with controlled hatch distances and depths. Additionally, Laser-Induced Periodic Surface Structures (LIPSS) were generated to assess nanoscale replication capabilities. PDMS was then cast onto the moulds and cured under standard conditions.
Surface characterization by scanning electron microscopy (ZEISS GeminiSEM 480) and profilometry (Bruker Countour x100) confirmed the high-fidelity transfer of both micro- and nanostructures from the laser-textured moulds to the PDMS. Wettability analysis via static contact angle measurements (DataPhysics OCA25) on water droplets of varying volume revealed a marked increase in hydrophobicity, reaching superhydrophobic levels for optimized geometries.
Moreover, a four-month stability test demonstrated that both hydrophobic and superhydrophobic properties remained stable over time, without the need for additional treatments or signs of surface degradation. This method, entirely free of chemical coatings, offers precise control over surface morphology and functional performance.
In conclusion, femtosecond laser-textured aluminium moulds offer a high-throughput, cost-effective approach for engineering hydrophobic and superhydrophobic PDMS surfaces, with promising applicability in lab-on-chip platforms, implantable biomedical devices and surface-functionalized microfluidic systems.
