The 6th International Electronic Conference on Applied Sciences
The 6th International Electronic Conference on Applied Sciences
Part of the International Electronic Conference on Applied Sciences series
Event's Timezone: Central European Time
25 July 2025
22 September 2025
5 December 2025
Biosciences, Artificial Intelligence, Mechanical Engineering, Nanotechnology, Civil Engineering, Energy and Environment, Dentistry, Food Sciences, Chemistry and Materials
Welcome from the Chairs
- Applied Biosciences and Bioengineering;
- Nanosciences, Chemistry and Materials Science;
- Computing and Artificial Intelligence;
- Electrical, Electronics and Communications Engineering;
- Mechanical and Aerospace Engineering;
- Energy, Environmental and Earth Science;
- Food Science and Technology;
- Applied Physical Science.
Professor of Electronics at University of Campania Luigi Vanvitelli, Naples, Italy
Dr. Stefano Toldo
Robert M. Berne Cardiovascular Research Center, University of Virginia, Charlottesville, USA
The Chairs of the 6th International Electronic Conference on Applied Sciences
Event Chairs
Professor of Electronics at University of Campania Luigi Vanvitelli, Naples, Italy
Nunzio Cennamo was born in Italy in 1975. He received the master degree in Electronic Engineering in 2002 and the PhD degree in Electronic Engineering in 2005, both from the Second University of Naples, Naples, Italy. He is a full Professor in Electronics at the University of Campania Luigi Vanvitelli, Naples (Italy). His research interests include the design and fabrication of optical sensors, chemical sensors, biosensors and optoelectronic devices. He is the author of more than 210 international journal and conference papers and 12 patents. He is cofounder of the Spin Off "MORESENSE srl" in Milan (Fondazione Filarete, Milan - Italy). He is an Associate Editor of “Photonics Research” (OSA), of “Applied Sciences“ (MDPI), and "Sensors" (MDPI). He is an Organizer and General Chair of several Internation Conferences, the “IEEE Sensor Applications Symposium” (SAS 2024), Naples (Italy) July 23-25, “7th International Symposium on Sensor Science” (I3S 2019) 9-11 May 2019, Naples (Italy), and of four editions of the “International Electronic Conference on Applied Sciences” (ASEC 2021, ASEC 2022, ASEC 2023, ASEC 2024). He is a Publicity Chair of two editions (the 6th and 7th) of the “IEEE International Symposium M&N (18-20 July 2022 Padua - Italy and 3-5 July 2024 Rome - Italy). He is several times an Invited Speaker in Webinars, Summer Schools, and International Conferences. He is an Organizer/Chair of several Special Session in International Conferences and a Member of several Scientific Committees. He is a Principal Investigator of several national Projects and Coordinator of the Local Unit of national and international Projects (total budget about 2M Euros).
Robert M. Berne Cardiovascular Research Center, University of Virginia, Charlottesville, USA
Dr. Toldo, an Italian native, received an MS degree in Molecular Biology from the University of Rome “La Sapienza” in 2006 and a Ph.D. degree in Cellular and Molecular Cardiology from the Catholic University of the Sacred Heart of Rome, in 2010. After a postdoctoral fellowship at the Virginia Commonwealth University Pauley Heart Center, in 2015 Dr. Toldo became Assistant Professor of Medicine at the same institution. In 2021 he was promoted to the rank of Associate Professor and in 2023 moved to the Robert M. Berne Cardiovascular Research Center at the University of Virginia. The research focus of Dr. Toldo is oriented toward understanding the mechanism by which stress signals and myocardial injury lead to activation of the local and systemic inflammatory response that affects the heart function and structure.
Technical Program Committee Chairs
Dr. Francesco Arcadio
Department of Engineering, University of Campania Luigi Vanvitelli, Italy
optical fiber sensors; biosensors; chemical sensors; optoelectronics; plasmonic sensors
Francesco Arcadio was born in Italy, in 1991. He received the master’s degree in electronic engineering and the Ph.D. degree in Industrial and Information Engineering from the University of Campania “Luigi Vanvitelli”, Aversa, Italy, in 2018 and 2021, respectively. He is a Postdoctoral Researcher with the University of Campania “Luigi Vanvitelli” from 2021 to the current date. His current research interests include the design and fabrication of optical sensors, optical fiber sensors, chemical sensor and biosensors. He is also a Co-Founder of the spin-off company “MoReSense srl”, Milan, Italy.
Prof. Francesco Dell'Olio
Department of Electrical and Information Engineering, Polytechnic University of Bari, Italy
nanophotonics; silicon photonics; sensor; biosensor
Prof. Francesco Dell'Olio is an Associate Professor in Electronics at the Polytechnic University of Bari, Italy. He has attained the National Scientific Qualification for the position of Full Professor in Electronics and Physics of Matter. He was awarded his PhD in Information & Communication Technologies in 2010. Dell'Olio is a regular member of organizing committees and program committees for international conferences, including CLEO, SPIE Photonics West, and the IEEE Photonics Conference. He is co-author of two books, published respectively by Springer and World Scientific, and 50+ papers in international peer-reviewed journals. He has been involved in several research projects funded by the Italian Ministry of University and Research, the European Space Agency, the Italian Space Agency, as well as industrial companies, some of which involved taking on roles of scientific responsibility. His research focuses on Silicon Photonics and Nanophotonics, with particular regard for modeling, design, and characterization of devices and integrated circuits for telecommunications and sensing. He has of late branched into electrochemical and colorimetric wearable sensors and miniature sensor-based embedded systems. Dell'Olio recently co-founded a startup company, WEATECHO, which is developing wearable devices for the Healthcare market.
Dr. Mimimorena Seggio
Department of Engineering, Università Telematica Pegaso, Italy
Optical biosensors, plasmonic sensors, environmental monitoring, biomedical sensors
Mimimorena Seggio was born in Italy in 1988. She received her PhD in chemical sciences in 2021 from the University of Catania (Italy) in the laboratory of Photochemistry. She has been an assistant professor at the University of Verona, and now she is an assistant professor at Pegaso University. Her current research interests are focused on the development and characterization of optical biosensors applied to environmental and biomedical monitoring.
Session Chairs
Prof. Dr. Roger Narayan
Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695, USA
S1. Applied Biosciences and Bioengineering
laser-based fabrication of medical devices; nanostructured biomaterials; drug delivery; laser processing of nanostructured and microstructured biomaterials
Dr. Roger Narayan is a Professor in the Joint Department of Biomedical Engineering at the University of North Carolina and North Carolina State University. He is an author of over three hundred publications as well as several book chapters on processing and characterization of biomedical materials. Dr. Narayan has also edited several books, such as the textbook Biomedical Materials (Springer) and the handbook Materials for Medical Devices (ASM International).
Prof. Dr. Alberto Jiménez Suárez
Materials Science and Engineering Area, Escuela Superior de Ciencias Experimentales y Tecnología, Universidad Rey Juan Carlos, Calle Tulipán s/n, Móstoles, 28933 Madrid, Spain
S2. Nanosciences, Chemistry and Materials Science
multifunctional composite materials; self-healing materials; 3D printed nanocomposites; structural health monitoring
https://gestion2.urjc.es/pdi/ver/alberto.jimenez.suarez
Assoc. Prof. Alessandro Lo Schiavo
Dipartimento di Ingegneria, Università degli Studi della Campania "Luigi Vanvitelli", Via Roma, 81031 Aversa, CE, Italy
S4. Electrical, Electronics and Communications Engineering
analysis and design of analog circuits; RF communication circuits; nonlinear circuit theory; circuit simulation; wireless sensor networks and electronic circuits for energy harvesting
https://www.ingegneria.unicampania.it/dipartimento/docenti?MATRICOLA=058211
Prof. André Furtado
CERIS, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal
S5. Mechanical and Aerospace Engineering
seismic engineering; structural engineering; experimental testing; numerical modelling; masonry infill walls; reinforced concrete structures; seismic vulnerability assessment; retrofitting; energy efficiency
Prof. André Furtado
Dr. Simeone Chianese
Department of Engineering, University of Campania “Luigi Vanvitelli”, Aversa, Italy
S6. Energy, Environmental and Earth Science
advanced oxidation processes for wastewater treatment; micro-pollutant removal from water and wastewater; innovative technologies for groundwater remediation
S6. Energy, Environmental and Earth Science
Dr. Antonios E. Koutelidakis
Unit of Human Nutrition, Department of Food Science and Nutrition, University of the Aegean, Lemnos, Greece
S7. Food Science and Technology
nutrition and health; functional foods; bioactive compounds; bioactivity and bioavailability; phytochemicals and chronic diseases
Antonios Koutelidakis is Associate Professor on Human Nutrition and Director of the Master Program "Nutrition, Well-being and Public Health". He has 60 publication on international journals and 90 announcements in Greek and International Conferences. His scientific interests are focused on bioactivity and bioavailability of functional foods, clinical and epidemiological studies about the effect of nutrition oh disease prevention.
Dr. Cosimo Trono
“Nello Carrara” Institute of Applied Physics, IFAC-CNR, Via Madonna del Piano 10, I-50019 Firenze, Italy
S8. Applied Physical Science
optics; optical sensors; fibre optic sensors; point of care testing (POCT)
https://cbs.ifac.cnr.it/index.php/people/2-non-categorizzato/10-trono
Event Committee
Institute for Frontier Materials, Deakin University, Waurn Ponds, VIC 3216, Australia
nanostructured membranes; porous materials; membrane characterization
Institute of Systems and Robotics (ISR-UC), Department of Electrical and Computer Engineering (DEEC-UC), University of Coimbra, Pólo II, PT-3030-290 Coimbra, Portugal
computational intelligence; intelligent control; computational learning; machine learning; fuzzy systems; neural networks; optimization; modeling; simulation; estimation; prediction; control; big data; robotics; mobile robotics and intelligent vehicles; r
Department of Mechanical Engineering, Materials Division, National University of Singapore, 117575 Singapore, Singapore
Provost Chair Professor Manoj Gupta was a former Head of the Materials Division of the Mechanical Engineering Department. He did his Ph.D. at the University of California, Irvine, USA (1992), and postdoctoral research at the University of Alberta, Canada (1992). He has worked for about 40 years in the area of metallic materials, with a particular focus on metallic composites of different types. He has taken multiple consultancy work related to failure of materials besides teaching many people in corporate sectors on the same topic. He is currently among the top 1% of researchers as per Stanford’s List, The Universal Scientific Education and Research Network, and ResearchGate. He has published over 720 peer-reviewed journal papers and owns two US patents and two Trade Secrets. His h-index is 89, and his citations are over 29000. He has also co-authored eight books published by John Wiley, Springer, and MRF - USA. A multiple award winner, he actively collaborates/visits Japan, France, Saudi Arabia, Qatar, China, USA, and India as a visiting researcher, professor, and chair professor.
Metals; alloys; composites; processing; bioimplants
Department of Mechanics of Materials and Constructions, Vrije Universiteit Brussel, 1050 Brussels, Belgium
Non-destructive Testing; ultrasound; acoustic emission; concrete; composites; damage; healing
Centro de Investigação em Modelação e Optimização de Sistemas Multifuncionais (CIMOSM), Instituto Superior de Engenharia de Lisboa (ISEL), Rua Conselheiro Emídio Navarro 1, 1959-007 Lisboa, Portugal.
Instituto de Engenharia Mecânica (IDMEC), Av. Rovisco Pais, 1, 1049-001 Lisboa, Portugal.
composite materials; advanced composites; numerical modeling; structural optimization; reverse engineering
quantum cryptography; quantum effects in optical fibers; single- and entangled-photonic state generation and detection; quantum homodyne and heterodyne detection
Department of Mechanical Engineering, Faculty of Science and Technology, and Center for Mechanical Engineering, Materials, and Processes (CEMMPRE), University of Coimbra, 3004-531 Coimbra, Portugal
biomechanics; numerical simulation; experimental testing; composites; structural integrity
Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal
mechatronics and robotics; 3D printing materials and technologies; multibody dynamics, vibration and damping; smart materials and structures; computational and experimental mechanics; instrumentation and control
Departamento de Ingeniería Rural y Agroalimentaria, Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia, Spain
biomass; bioenergy; Anaerobic Digestion; Anaerobic Co-digestion ; agricultural mechanization
applied mathematics and mechanics, applied and mathematical physics; materials science and engineering; aerospace electronics and photonics; Design for Reliability (DfR) of electronic, opto-electronic and photonic assemblies, packages and systems; applied
Robert R. McCormick School of Engineering and Applied Science, Evanston, United States
Quantum Semiconductor; Quantum Physic; Quantum Materials; Quantum Sensing; Quantum Devices; Detector; FPAS; imagers from deep UV- to THZ; QCL; Laser diodes from Deep UV to THZ.
National Research & Development Institute for Chemistry and Petrochemistry - ICECHIM Bucharest, 060021 Bucharest, Romania
molecularly imprinted polymers; synthesis by polymerization or phase inversion; obtaining films and membranes; sol–gel reactions; covalent immobilization of enzymes on polymers; polymer nanocomposites; hybrid inorganic–organic nanocomposites
process analysis and technology development based on virtual representation; numerical analysis of products and processes; optimization of process performance; optimization of production; product deve
Department of Biochemistry, Chemistry, and Physics, Georgia Southern University, Statesboro, GA 30460, USA
atomic layer deposition; glasses; luminescence; materials chemistry and physics; nanomaterials; optical materials; plasmonics; solar cells; surface science; thin films
Algoritmi Research Centre, University of Minho, 804-533 Guimarães, Portugal
discrete event simulation; agent based simulation; big data; data warehousing; data visualization; data quality; data modelling; data driven approaches; system dynamics; optimization; supply chain management; logistics and transportation; risk management;
Department of Technologies of Computers and Communications, Universidad de Extremadura, Cáceres, Spain
embedded computing; reconfigurable computing; computational intelligence; optimization
Universidad Autónoma de Madrid, Department of Chemical Engineering, Madrid, Spain
aqueous phase reforming; renewable hydrogen; environmental catalysis; biomass valorization; thermochemical processes; carbon materials
School of Biomedical Engineering, Science & Health Systems; Dept. of Psychological & Brain Sciences, College of Arts & Sciences; and A.J. Drexel Autism Institute, Drexel University, Philadelphia, PA, USA
neuroergonomics; functional neuroimaging; biomedical signal processing; neuroengineering; Functional Near Infrared spectroscopy (fNIRS); Electroencephalogram (EEG); Brain Computer Interfaces (BCI); Mobile Brain/Body Imaging (MoBI)
Department of Materials Science and Engineering, North Carolina State University, Raleigh, NC 27695, USA
Dr. Roger Narayan is a Professor in the Joint Department of Biomedical Engineering at the University of North Carolina and North Carolina State University. He is an author of over three hundred publications as well as several book chapters on processing and characterization of biomedical materials. Dr. Narayan has also edited several books, such as the textbook Biomedical Materials (Springer) and the handbook Materials for Medical Devices (ASM International).
laser-based fabrication of medical devices; nanostructured biomaterials; drug delivery; laser processing of nanostructured and microstructured biomaterials
REQUIMTE/LAQV, ISEP, Polytechnic of Porto, Rua Dr. António Bernardino de Almeida, 4249-015 Porto, Portugal
(bio)sensors; application of functional nanostructured materials; green technologies; new methodologies for (electro)analysis; environmental chemistry; monitoring/biomonitoring
Department of Electrical and Computer Engineering, Virginia Commonwealth University, Richmond, VA 23173, USA
spintronics; straintronics; nanoelectronics
ultrafast and nonlinear optical processes; quantum optics; quantum photobiology
Department of Computer Science and Engineering, University of North Texas, Denton, TX 76203, USA
medical image and video analysis; video database; management systems
CESAM—Centre for Environmental and Marine Studies, Department of Chemistry, University of Aveiro, 3810-193 Aveiro, Portugal
atmospheric organic aerosols; water-soluble organic aerosols; source signatures; health effects of organic aerosols; wet and dry deposition of organic aerosols; atmospheric stressors
Department of Mechanical Engineering, University of Coimbra, 3030-788 Coimbra, Portugal
fatigue behavior; additive manufacturing; multiaxial fatigue; damage accumulation; notch effect; low-cycle fatigue
Department of Chemistry, University College London (UCL), UK Group leader, Institute of Functional Interfaces (IFG), Karlsruher Institut für Technologie (KIT), Germany
hydrogen production; metal oxides; surface reactions; surface spectroscopy; photocatalysis; heterogeneous catalysis
biotechnology; bioeconomy; biomarkers; circular economy; stress biology
Group of Analysis, Security and Systems (GASS), Department of Sofware Engineering and Artificial Intelligence, Universidad Complutense de Madrid (UCM), 28040 Madrid, Spain
6G; artificial intelligence; computer security; cyber security; deep learning; forensics; information security; machine learning; multimedia forensics; privacy; trust.
CSIC - Instituto de Química Física Blas Cabrera (IQF), Madrid, Spain
School of Mechanical and Robotics Engineering, Gwangju Institute of Science and Technology (GIST), Gwangju, Republic of Korea
computational physics; applied mathematics; biophysics; biomedicine
Radu Godina is currently an Assistant Professor at the NOVA School of Science and Technology, FCT NOVA, NOVA UNIVERSITY LISBON. He received the Ph.D. degree from University of Beira Interior (UBI), Covilhã, Portugal. Radu Godina is an Integrated Research Member of the Research and Development Unit in Mechanical and Industrial Engineering (UNIDEMI), which is part of Associated Laboratory of Intelligent Systems (LASI), located in Guimarães, Portugal. He has authored or co-authored more than 185 indexed international journals, book chapters and conference proceedings papers in such topics as industrial symbiosis, sustainability, lean manufacturing, electric vehicles, circular economy, life cycle assessment and quality control. He has published with 25 international universities and 10 distinct enterprises and/or corporations. He is a full member of the EurOMA (European Operations Management Association) and full member of the IEOM Society International Association (Industrial Engineering and Operations Management Society - IEOM). He recently is developing research in the project Microstructural Engineering and Integrated Non-Destructive Testing - Smart-WAAM obtained through European Institute of Innovation & Technology (EIT) RawMaterials, and in this task the goal is to detail rigorously and perform the life cycle analysis, life cycle cost and social life cycle analysis of the additive manufacturing process, namely Wire Arc Additive Manufacturing (WAAM). Radu Godina is currently the coordinator at UNIDEMI of the project M4ML - Mobility for Maritime Logistics: M4ML, which is part of the Blue Growth Program that is funded by the EEA Grants Portugal and the Portuguese State.
Industrial Symbiosis; Lean and Six Sigma; Continuous Improvement; Industrial Ecology; Quality Control and Management
Technische Thermodynamik, Universität Bremen, Badgasteiner Str. 1, 28359 Bremen, Germany
spectroscopy; combustion; ionic liquid; four-wave mixing; raman; fluorescence; infrared
Department of of Socio-Economic, Managerial and Statistical Studies “G. d’Annunzio” University of Chieti-Pescara, 66100 Chieti, Italy
Industrial Electronics Department, University of Minho, 4800-058 Guimarães, Portugal
Graça Minas is Associate Professor with Habilitation at Department of Industrial Electronics University of Minho (UMinho), and a researcher at the Center for MicroElectromechanical Systems (CMEMS, UMinho). She has participated in 40 national and European projects and has been Principal Investigator in 10 of them (8 of these 10 are finished), in the area of microsystems for biomedical devices. She supervised 2 postdoc fellows, 15 PhD thesis (12 finished), 50 finished master thesis and many research fellows, all in the field of Biomedical and Electronics Engineering. She was opponent of several PhD and M. Sc. academic proof readings (some outside Portugal). She lectures Master courses in Industrial Electronics and Computers, in Biomedical, in Physics and Aerospace Engineering and in the Micro/Nano Technology, as well as in Doctoral Program of Biomedical Engineering, in the field of biosensors, analog electronics, microelectronics and microsystems fabrication. She was Director of the Department of Industrial Electronics of University of Minho (2021-2024), and she was Director of the Micro/Nano Technologies M. Sc degree (2008-2012) and of the biomedical engineering M. Sc degree (on 2008). She is member of the Scientific Council of Engineering School at UMinho, since 2019.
biomedical microsystems; fluidic lab-on-a-chip devices; on-chip integration of electronic circuits; optical filters; sensors; biosensors; microactuators
Materials Science and Engineering, University of North Texas, Denton, TX 76203, USA
nanomaterials and devices; low-dimensionality materials and properties; nanomaterials synthesis; fabrication; additive manufacturing; sensing devices; flexible electronics; solar cells; biosensingdevices; photodetectors
School of Mechanical and Materials Engineering, Washington State University, Pullman, WA 99164-2920, USA
additive manufacturing; biomaterials; laser processing; biotribology
School of Materials Science and Engineering, Georgia Institute of Technology, 771 Ferst Dr NW, Atlanta, GA, 30332, USA
plastic electronics; organic photovoltacis; metal oxide/transparent electronics; electro-optic materials and devices; organic materials for multiphotonics; contrast agents for magnetic resonance imaging (MRI)
Department of Food Science and Technology, University of Patras, 30100 Agrinio, Greece
artificial intelligence; computational intelligence; machine learning; genetic/evolutionary algorithms; decision support theory; intelligent information systems; applications of hybrid intelligent information systems for modeling real world time series be
CITAB—Centre for the Research and Technology of Agro-Environmental and Biological Sciences, UTAD—University of Trás-os-Montes e Alto Douro, Quinta de Prados, 5001-801 Vila Real, Portugal
image processing; medical image processing; artificial intelligence
Departamento de Matemática Aplicada, Universidad Politécnica de Valencia, Camino de Vera, 46022 Valencia, Spain
fuzzy logic; image processing; vision science; perceptual imaging
Department of Applied Physics, KTH Royal Institute of Technology, 10691 Stockholm, Sweden
nanomaterials; nanoengineering; colloidal synthesis; green chemistry; thermoelectrics; energy efficiency; heat transfer surfaces; nanofluids; nanocomposites; hybrid materials
Dipartimento di Chimica, Università di Pavia, viale Taramelli, 12, 27100 Pavia, Italy
coordination chemistry; supramolecular chemistry; inorganic nanoparticles; surface functionalization; antibacterial inorganic materials; photothermal nanoparticles
Department of Chemistry and Pharmacy, Faculty of Sciences and Technology, University of Algarve,Campus de Gambelas, 8005-139 Faro, Portugal
Heterogeneous catalysis; Mesoporous materials; Zeolites
Department of Applied Chemistry, Faculty of Science, Tokyo University of Science, 1-3 Kagurazaka, Shinjuku-ku, Tokyo162-8601, Japan
colloid and interface science; biointerface; nanoparticle; drug delivery system; biomaterial; three dimensional cell culture for drug screening; tissue engineering
School of Optometry and Vision Science, University of Waterloo, Waterloo, Canada
Clinical Imaging, Vision Rehabilitation, Optical Devices, Technology and Optics, Optical Systems
Institute of Science and Industrial Research, Osaka University, 8-1 Mihogaoka, Osaka 567-0047, Japan
single-molecule analysis; nanotechnology; quantum chemistry; artificial intelligence; analytical chemistry; biopolymer
Physical Chemistry Laboratory, School of Chemistry, Aristotle University of Thessaloniki, Thessaloniki, Greece
nanotechnologies; corrosion science; electrochemistry; polymer science; chemistry; coatings; sol–gel method; carbon fibers/nanotubes
University Institute for Technological Development and Innovation in Communications (IDeTIC), University of Las Palmas de Gran Canaria, Las Palmas de Gran Canaria, Spain
Prof. Dr. Jesús B. Alonso-Hernández received a Telecommunication Engineer Degree in 2001 and a Ph.D. Degree in 2006 from University of Las Palmas de Gran Canaria (ULPGC), Spain, where he is Full Professor in the Department of Signal and Communications. He is the Head of the Institute for Technological Development and Innovation in Communications (IDeTIC), at ULPGC. He has numerous papers published in international journals, international conferences and different patents. His research interests include signal processing in biocomputing, biometrics, nonlinear signal processing, recognition systems, audio characterization and data mining.
Video Processing; Classification Systems; Fault Characterization in Machinery through Audio and Vibrations; Environmental Acoustics; Biomedical Signal and Image Processing
Electronics Research Laboratory, Fukuoka Institute of Technology, Fukuoka 816-8888, Japan
microwave/millimeter-wave devices; systems for application to biological signals; fusion plasma diagnostics; synthetic aperture radar
Departament of Electrical, Thermal, Design and Projects Engineering, Escuela Técnica Superior de Ingeniería, Universidad de Huelva, Avda. de las Fuerzas Armadas s/n, 21007 Huelva, Spain
Currently an Associate Professor at the University of Huelva, where he has been a faculty member since 2015. His research has been focused since 2009 on the design of energy management systems for setups combining various energy sources, storage systems, and loads. He has participated in several National Plan research projects and has served as principal investigator for the following projects: Applications of Medium Voltage Direct Current Networks for Renewable Energy Integration, funded by the Chilean National Commission for Scientific and Technological Research (CONICYT), and Integration of Waste Heat Recovery Systems from Marine Diesel Engines Using Medium Voltage Direct Current Networks and ORC Systems (eCCoSHIP), funded by the Andalusia 2022 FEDER Operational Program. Currently, he leads the subproject corresponding to the University of Huelva within the European project REFFECT AFRICA and the TidUtil project on harnessing tidal currents along the coast of Huelva. His participation in these projects has resulted in more than 25 articles published in prestigious journals indexed in the JCR, as well as other works such as international conference presentations and book chapters.
renewable energy; energy sources; energy management systems; hybrid vehicles
Department of Chemical Engineering, National Technical University of Athens, 15780 Athens, Greece
Computational Fluid Dynamics; Numerical Simulation; Chemical Engineering; CFD Simulation; Numerical Modeling; Mathematical Modelling; Turbulence; Environmental and Energy Processes
Filipe Joel Soares received the Physics degree (five-year course) from the Faculty of Sciencesand an Electrical Engineering (Renewable Energies) Postgrad from Porto University, Porto,Portugal, in 2004 and 2007, respectively. He also received the Ph.D. degree in SustainableEnergy Systems, in the MITIPortugal Program, from Porto University, Porto, Portugal, in 2012. Currently he is a Senior Researcher in the Centre for Power and Energy Systems of INESC Portoand Assistant Professor in the Lusophone University of Porto. His research activity is directedtowards the integration of distributed energy resources (i.e. controllable loads, electric vehicles,renewable energy sources and stationary storage) in distribution grids, as well as to thedevelopment of advanced algorithms and functionalities for their management andparticipation in electricity markets. He is author of more than 50 papers in international journals and conferences.
Water and wastewater biological treatment; Bio-electrochemical systems; Resources and energy recovery from wastes; Colloidal transport in porous media; Mathematical modelling
Department of Industrial Safety and Environment, Korea Polytechnic VII University, Changwon 51518, Republic of Korea
Microbial fuel cell, biological wastewater treatment, Anammox, Nitrification, Denitrification, Plastic biodegradation, Euglena
Department of Chemical Engineering, Faculty of Chemical Sciences and Technologies, University of Castilla La Mancha, Campus Universitario s/n, 13071 Ciudad Real, Spain
Department of Natural Resources and Agricultural Engineering, Agricultural University of Athens, Athens 11855, Greece
Research Center for Active Living and Wellbeing, Instituto Politécnico de Bragança, Campus de Santa Apolónia, 5300-253 Bragança, Portugal
Chemistry and food quality; quality control and chemical characterization; sustainable processes and products; chronic kidney disease; renal fibrosis; drinking water quality
Microbial Biotechnology-Molecular Bacteriology-Virology Laboratory, Department of Biochemistry & Biotechnology, University of Thessaly, 41500 Larissa, Greece
Dimitris Mossialos is currently a Full Professor in Microbial Biotechnology at the Department of Biochemistry & Biotechnology (DBB), University of Thessaly (Larissa, Greece). He obtained his PhD (2000) from Vrije Universiteit Brussel working on the molecular and biochemical characterization of high-affinity iron uptake systems in Pseudomonads. He has been Postodoctoral Fellow at Imperial College (2000-2003) and Universite de Lausanne (2005-2006) where he studied the mechanisms of oxidative stress and cyanogenesis in /Pseudomonas aeruginosa/ and gene regulation through GacS-GacA two component regulatory system in /Pseudomonas fluorescens/ respectively. He is the Head of the Microbial Biotechnology-Molecular Bacteriology-Virology Lab at DBB since 2018. His current research focus on the antimicrobial activity, mode of action and microbiome of honey bee products especially honey and beebread. Furthermore, his lab is actively involved in the characterization of microbial communities implicated in biodeterioration of Cultural Heritage objects and monuments as well as the development of molecular diagnostic tools. He is the National Representative of Greece in International Biodeterioration and Biodegradation Society (IBBS). He serves as reviewer for >42 international journals and he is Member of the Editorial board in Applied Sciences (Food Science and Technology Section), Biotechnology Letters//and//Trakya University Journal of Natural Sciences. Moreover, he serves as Associate Editor for Frontiers in Microbiology (Food Microbiology, Systems Microbiology). Overall, Prof. Dimitris Mossialos published 69 articles in peer-reviewed journals (including top journals like PNAS, ISME Journal, Journal of Biological Chemistry, Nucleic Acids Research) with a total impact factor (IF)>271, >3100 citations, and h-index 30 (Google Scholar).
Molecular Microbiology with emphasis in Pseudomonads; Microbial Biotechnology; Antimicrobial activity and mode of action of honey bee products; Microbiome of honey bees and hive products; Biodeterioration of Cultural Heritage obkects and monuments; Develo
Coimbra Polytechnic - ISEC, Coimbra, Portugal
Nagoya Institute of Technology, Nagoya 466-8555, Japan
photovoltaic device; organic–inorganic hybrid; nanomaterial; thin film; perovskite
Invited Speakers
Department of Hydraulic and Sanitary Engineering, Poznan University of Life Sciences, Piątkowska 94A, 60-649 Poznan, Poland
Use of Microbial Carriers in Anaerobic Digestion: Scientific and Research Aspects
Agnieszka Pilarska is an Associate Professor at the Department of Hydraulic and Sanitary Engineering at the Poznań University of Life Sciences, Poland. She completed her MSc in Chemical Technology at the Poznan University of Technology between 1996 and 2001, and pursued her PhD at the same faculty from 2008 to 2012. In 2019, she obtained her habilitation degree in the discipline of Environmental Engineering, Mining and Energy. Her research interests span material chemistry, microbial carriers, biogas production, waste management, wastewater treatment, biosorbents and other aspects of renewable energy. A respected academic at the Poznań University of Life Sciences, she has received numerous awards in recognition of her significant scientific achievements. According to Scopus, her current research metrics include an Hirch Index of 19 and 1,233 citations.
chemistry; environmental engineering; waste management; biogas production; carriers and adsorbents; microorganisms; NGS
Sessions
S2. Nanosciences, Chemistry and Materials Science
S3. Computing and Artificial Intelligence
S4. Electrical, Electronics and Communications Engineering
S5. Mechanical and Aerospace Engineering
S6. Energy, Environmental and Earth Science
S7. Food Science and Technology
S8. Applied Physical Science
Registration
The registration for ASEC2025 will be free of charge! The registration includes attendance to all conference sessions.
If you are registering several people under the same registration, please do not use the same email address for each person, but their individual university email addresses. Thank you for your understanding.
Please note that the submission and registration are two separate parts. Only scholars who registered can receive a link to access the conference live streaming. The deadline for registration is 5 December 2025 .
Instructions for Authors
ASEC2025 will accept abstracts only. All abstracts accepted for presentation will be collected in a book of abstracts, which will be published on Sciforum.net during and after the conference.
Certificates of Participation are available in your logged-in area of Sciforum.net, under “My Certificates” after the conference. Please note that the certificate is only for authors with accepted abstracts or registrations who attend the live session.
2. All abstracts should be submitted and presented in clear, publication-ready English with accurate grammar and spelling.
3. You may submit multiple abstracts. However, only one abstract will be selected for oral presentation.
4. The abstracts submitted to this conference must be original and novel, without prior publication in any journals or it will not be accepted to this conference.
2. Please select only one presenter for each submission. If you would like to change the presenter after submission, please email us accordingly.
Note: We only accept live presentations.
- Size in pixels: 1080 width x 1536 height–portrait orientation.
- Size in cm: 38,1 width x 54,2 height–portrait orientation.
- File format: PDF (.pdf).
- Font size: ≥16.
Examples of successful submissions can be viewed here
Guide of how to create a Poster (1), (2)
You can use our free template to create your poster. The poster template can be downloaded here.
For specific submission steps, please refer to the poster submission guidelines.
It is the author's responsibility to identify and declare any personal circumstances or interests that may be perceived as inappropriately influencing the representation or interpretation of clinical research. If there is no conflict, please state "The authors declare no conflicts of interest." This should be conveyed in a separate "Conflict of Interest" statement preceding the "Acknowledgments" and "References" sections at the end of the manuscript. Any financial support for the study must be fully disclosed in the "Acknowledgments" section.
MDPI, the publisher of the Sciforum.net platform, is an open access publisher. We believe authors should retain the copyright to their scholarly works. Hence, by submitting an abstract to this conference, you retain the copyright to the work, but you grant MDPI the non-exclusive right to publish this abstract online on the Sciforum.net platform. This means you can easily submit your full paper (with the abstract) to any scientific journal at a later stage and transfer the copyright to its publisher if required.
Publication Opportunity
Participants in this conference are cordially invited to contribute a full manuscript to a Special Issue published in Applied Sciences (ISSN: 2076-3417; Impact Factor: 2.5), with a 20% discount on the publication fee. All submitted papers will undergo MDPI’s standard peer-review procedure. The abstracts should be cited and noted on the first page of the paper.
Please note if you have IOAP/association discounts, conference discounts will be combined with IOAP/association discounts. Conference discounts cannot be combined with reviewer vouchers. All submitted papers will undergo MDPI’s standard peer-review procedure. The abstracts should be cited and noted on the first page of the paper.
2. Proceeding Paper Publication
All accepted abstracts will be published in the conference report of ASEC2025 in Engineering Proceedings (SCOPUS Indexed; ISSN: 2673-4591) after quality check. If you wish to publish an extended proceeding paper (4-8 pages), please submit it to the same journal after the conference.
Proceedings paper submission deadline: 11 February 2026.
Manuscripts for the proceedings issue must be formatted as follows:
Title
Full author names
Affiliations (including full postal address) and authors' e-mail addresses
Abstract
Keywords
Introduction
Methods
Results and Discussion
Conclusions
Acknowledgements
References
Event Awards
The Awards
Number of Awards Available: 8
Sponsors and Partners
Organizers
Co-organizers
Media Partners
Conference Secretariat
Ms. Sharon Wang
Ms. Nicole Lian
Ms. Sonya Qin
Ms. Carol Yan
Email: asec2025@mdpi.com
For inquiries regarding submissions and sponsorship opportunities, please feel free to contact us.
