The 5th International Electronic Conference on Applied Sciences
Part of the International Electronic Conference on Applied Sciences series
4–6 Dec 2024
Biosciences, Artificial Intelligence, Mechanical Engineering, Nanotechnology, Civil Engineering, Energy and Environment, Dentistry, Food Sciences, Chemistry and Materials
- Go to the Sessions
-
- S1. Applied Biosciences and Bioengineering
- S2. Nanosciences, Chemistry and Materials Science
- S3. Computing and Artificial Intelligence
- S4. Electrical, Electronics and Communications Engineering
- S5. Mechanical and Aerospace Engineering
- S6. Energy, Environmental and Earth Science
- S7. Food Science and Technology
- S8. Applied Physical Science
- Event Details
ASEC2024 will be FREE for Participation!
Join us today to register and submit your abstract, and be part of cutting-edge discussions and networking opportunities!
Welcome from the Chairs
We are pleased to announce the 5th International Electronic Conference on Applied Sciences. This international conference is sponsored by MDPI OA journal Applied Sciences (ISSN: 2076-3417), will bring together scientists from different areas to discuss important recent developments in a number of fields. It represents an opportunity to gather an interdisciplinary community to discuss applied sciences. More specifically, after the success of the first four editions, this year’s edition will focus on eight thematic areas of applied nature sciences:
- Applied Biosciences and Bioengineering
- Nanosciences, Chemistry and Materials Science
- Computing and Artificial Intelligence
- Electrical, Electronics and Communications Engineering
- Mechanical and Aerospace Engineering
- Energy, Environmental and Earth Science
- Food Science and Technology
- Applied Physical Science
We expect that participants of this conference will exchange novel provocative ideas by presenting short oral presentations on research and development discoveries. Posters can be presented without an accompanying proceedings paper and will be available on this website during and after the e-conference.
Specifically, you do not need to seek financial support for travel, purchase air tickets, leave your house, office, and family, make a hotel room reservation, take a trip, or adjust to the time zone where the conference takes place during the entire conference period.
Under the virtual conference settings, there are additional advantages: (1) engagement tools that keep energy levels high, (2) participants are given a voice, (3) far stronger attention is received while one is talking, (4) Q&A through “Chat” is also possible if you do not wish to raise your question verbally, (5) polls, (6) feedback through Chat, (7) use of symbols under the “Reactions” function to show your voice, appreciation, or request, (8) greater reach with a remote audience, and (9) the ability to deliver live and pre-recorded presentations simultaneously.
Please find the best oral award and best poster award by clicking the following link:
https://sciforum.net/event/ASEC2024?section=#awards
Extended and expanded versions of the conference proceedings papers can be submitted to a Special Issue in the journal Applied Sciences after the conference, with a 20% discount on the article processing charges.
Applied Sciences is an international, peer-reviewed, open access journal on all aspects of applied natural sciences. It is published semimonthly online by MDPI.
We hope the community will share our enthusiasm and help to make this 5th edition a success, and that there will be many more conferences in the future.
Prof. Dr. Nunzio Cennamo
Professor of Electronics at University of Campania Luigi Vanvitelli, Naples, Italy
Dr. Stefano Toldo
Robert M. Berne Cardiovascular Research Center, University of Virginia, Charlottesville, USA
The Chairs of the 5th International Electronic Conference on Applied Sciences
Follow the conference organizer on Social Media
Event Chairs
Professor of Electronics at University of Campania Luigi Vanvitelli, Naples, Italy
Prof. Dr. Nunzio Cennamo was born in Italy in 1975. He received the master's degree in electronic engineering in 2002 and the Ph.D. degree in electronic engineering in 2005, both from the Second University of Naples, Naples, Italy. He is Professor of Electronics at University of Campania Luigi Vanvitelli (Naples) Italy. His research interests include the design and fabrication of optical fiber sensors, chemical sensors, biosensors and optoelectronic devices. He is the author of more than 160 international journal and conference papers and 10 patents. He is a co-founder of the Spin-Off "MORESENSE srl" in Milan - Italy. He is an Associate Editor of “Photonics Research” (OPTICA) and of “Applied Sciences“ (MDPI). He is an invited speaker at several international conferences. He is an Organizer and General Chair of the 7th International Symposium on Sensor Science (I3S 2019), 9-11 May 2019, Naples (Italy), and of several editions of the International Electronic Conference on Applied Sciences (ASEC, 2021, 2022, and 2023).
Robert M. Berne Cardiovascular Research Center, University of Virginia, Charlottesville, USA
Dr. Toldo, an Italian native, received an MS degree in Molecular Biology from the University of Rome “La Sapienza” in 2006 and a Ph.D. degree in Cellular and Molecular Cardiology from the Catholic University of the Sacred Heart of Rome, in 2010. After a postdoctoral fellowship at the Virginia Commonwealth University Pauley Heart Center, in 2015 Dr. Toldo became Assistant Professor of Medicine at the same institution. In 2021 he was promoted to the rank of Associate Professor and in 2023 moved to the Robert M. Berne Cardiovascular Research Center at the University of Virginia. The research focus of Dr. Toldo is oriented toward understanding the mechanism by which stress signals and myocardial injury lead to activation of the local and systemic inflammatory response that affects the heart function and structure.
Technical Program Committee Chairs
Prof. Francesco Dell'Olio
Department of Electrical and Information Engineering, Polytechnic University of Bari, Italy
Prof. Francesco Dell'Olio is an Associate Professor in Electronics at the Polytechnic University of Bari, Italy. He has attained the National Scientific Qualification for the position of Full Professor in Electronics and Physics of Matter. He was awarded his PhD in Information & Communication Technologies in 2010. Dell'Olio is a regular member of organizing committees and program committees for international conferences, including CLEO, SPIE Photonics West, and the IEEE Photonics Conference. He is co-author of two books, published respectively by Springer and World Scientific, and 50+ papers in international peer-reviewed journals. He has been involved in several research projects funded by the Italian Ministry of University and Research, the European Space Agency, the Italian Space Agency, as well as industrial companies, some of which involved taking on roles of scientific responsibility. His research focuses on Silicon Photonics and Nanophotonics, with particular regard for modeling, design, and characterization of devices and integrated circuits for telecommunications and sensing. He has of late branched into electrochemical and colorimetric wearable sensors and miniature sensor-based embedded systems. Dell'Olio recently co-founded a startup company, WEATECHO, which is developing wearable devices for the Healthcare market.
nanophotonics; silicon photonics; sensor; biosensor
Dr. Francesco Arcadio
Department of Engineering, University of Campania Luigi Vanvitelli, Italy
Dr. Francesco Arcadio was born in Italy, in 1991. He received the master’s degree in electronic engineering and the Ph.D. degree in industrial and information engineering from the University of Campania “Luigi Vanvitelli,” Aversa, Italy, in 2018 and 2021, respectively.
optical fiber sensors; biosensors; chemical sensors; optoelectronics; plasmonic sensors
Session Chairs
Prof. Dr. Paola Saccomandi
Politecnico di Milano, Department of Mechanical Engineering, Milan, Italy
S1. Applied Biosciences and Bioengineering
fiber optic sensors; biomedical imaging for physiological parameters monitoring; light-based approaches for hyperthermal treatment and monitoring
Dr. Ohshiro Takahito
Institute of Science and Industrial Research, Osaka University, Osaka, Japan
S1. Applied Biosciences and Bioengineering
single-molecule analysis; nanotechnology; quantum chemistry; artificial intelligence; analytical chemistry; biopolymer
Dr. Takahito Ohshiro, affiliated with Osaka University, is an expert in Analytical Chemistry, Electrochemistry, Bioanalysis, Nanotechnology, and Machine Learning. His pioneering research is aimed at developing innovative devices for the detection of single molecules and novel sequencers for biomacromolecules, thus providing cutting-edge solutions to complex biological challenges.
Prof. Dr. Alberto Jiménez Suárez
Materials Science and Engineering Area, Escuela Superior de Ciencias Experimentales y Tecnología, Universidad Rey Juan Carlos, Calle Tulipán s/n, Madrid, Spain
S2. Nanosciences, Chemistry and Materials Science
multifunctional composite materials; self-healing materials; 3D printed nanocomposites; structural health monitoring
Dr. Cosimo Trono
Fibre Optics Group, Institute of Applied Physics 'Nello Carrara', Italy
S4. Electrical, Electronics and Communications Engineering
design and development of a fibre optics based sensor
Prof. Dr. Stefania Campopiano
Parthenope University of Naples, Naples, Italy
S4. Electrical, Electronics and Communications Engineering
the development of optoelectronic devices for telecommunications and sensory applications
Stefania Campopiano is a Full Professor in Electronics and Optoelectronics with the University of Naples "Parthenope". Her main research field is in the area of optoelectronic sensors and devices. She is the author of over 250 printed works, including international and peer-reviewed journals and conferences proceedings, coauthor of patents, and reviewer for several journals. Her principal research interests include the design, realization, and testing of novel fiber optic based devices and the main achievements regard their practical application as sensors for the measurement of several physical and bio-chemical parameters. She cooperates on scientific arguments with several universities andcompanies in Italy and abroad. She is the Chair of the IEEE Sensors Council Italy Section.
Dr. Grazia Leonzio
1. Department of Mechanical, Chemical and Material Engineering, University of Cagliari, Italy 2. Department of Chemical Engineering, Process Systems Engineering, Imperial College London, London, UK
S6. Energy, Environmental and Earth Science
renewable energies; carbon dioxide; carbon dioxide removal; modelling of chemical processes; carbon supply chains; environmental analysis of chemical processes; methanol
Dr. Antonios E. Koutelidakis
Unit of Human Nutrition, Department of Food Science and Nutrition, University of the Aegean, Lemnos, Greece
S7. Food Science and Technology
nutrition and health; functional foods; bioactive compounds; bioactivity and bioavailability; phytochemicals and chronic diseases
Antonios Koutelidakis is Associate Professor on Human Nutrition and Director of the Master Program "Nutrition, Well-being and Public Health". He has 60 publication on international journals and 90 announcements in Greek and International Conferences. His scientific interests are focused on bioactivity and bioavailability of functional foods, clinicala nad epidimiological studies about the effect of nutrition oh disease prevention
Dr. Ali Belarouci
Lyon Institute of Nanotechnology, Villeurbanne, France
S8. Applied Physical Science
optical microcavities; plasmonics; single molecule/qdot spectroscopy in optically confine
Ali Belarouci received his Ph.D from The University of Lyon, France in 1999. He is currently a senior research scientist at the French National Research Agency (CNRS). His research interests include Nanophotonics and Plasmonics, Physics of light-matter interaction at the nanoscale,Nanoscale heat management and Energy harvesting.
Prof. Dr. Milos Nesladek
Department Physics, Hasselt University, Hasselt, Belgium
S8. Applied Physical Science
quantum material science; quantum technology
Dr. André Furtado
CERIS, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal
S5. Mechanical and Aerospace Engineering
seismic engineering; structural engineering; experimental testing; numerical modelling; masonry infill walls; reinforced concrete structures; seismic vulnerability assessment; retrofitting; energy efficiency
Dr. André Furtado
Dr. Eugenio Vocaturo
1. DIMES Department, University of Calabria, Rende, CS, Italy. 2. CNR Nanotec, Rende (CS), Italy
S3. Computing and Artificial Intelligence
artificial intelligence; optimization; image analysis; data mining
Eugenio Vocaturo received a Laurea Degree in Management Engineering, a Master Degree in Design and Development of Web and Mobile Applications and a PhD Degree in Information and Communication Technologies at the University of Calabria, Italy. He also received a Master Degree in Industrial Process Management and a Master Degree in Finance issued by SDA Bocconi. He has decades of experience as company director, being head of editorial production of important IT publishing houses and co-founding partner of the start-up BigTech. He is currently researcher at CNR-Nanotec and contract professor of Informatics, Data Mining and Information Systems and DataBase at University of Calabria. His current research interests include Machine Learning, Deep Learning, Optimization, Health Informatics, Data Mining, Cultural Heritage. He is member of Topical Advisory Panel and Editor Reviewer of several international journals and permanent member of the program committee of international conferences, being author of several papers in international journals, conferences and books. He is a member of SIBIM (Italian Scientific Society of Biomedical Informatics) and of HL7 Italy (formed in 2003 as part of HL7 International), company responsible for the localization of health standards aiming at promoting the modernization of Italian health.
Event Committee
Department of Agriculture, University of Ioannina, Arta, Greece
S1.Applied Biosciences and Bioengineering
biological control; entomology; entomopathogenic fungi
Unit of Orthodontics and Paediatric Dentistry, Section of Dentistry, Department of Clinical, Surgical, Diagnostic and Paediatric Sciences, University of Pavia, Pavia, Italy
S1. Applied Biosciences and Bioengineering
dentistry
Department of Neurosciences, Reproductive and Odontostomatological Sciences, University of Naples “Federico II”, Naples, Italy
S1. Applied Biosciences and Bioengineering
oral medicine; dental materials; operative dentistry; oral health
Multidisciplinary Department of Medical-Surgical and Dental Specialties, University of Campania, Luigi Vanvitelli, Naples, Italy
S1. Applied Biosciences and Bioengineering
temporomandibular disorders; TED; temporomandibular joint; orofacial pain; dentistry; telemedicine; tele dentistry; implant; prosthesis; oral surgery
Department of Materials Science and Engineering, North Carolina State University, Raleigh, USA
S1. Applied Biosciences and Bioengineering
laser-based fabrication of medical devices; nanostructured biomaterials; drug delivery; laser processing of nanostructured and microstructured biomaterials
Department of Medicine and Surgery, University of Salerno, Baronissi, Italy
S1. Applied Biosciences and Bioengineering
oral medicine and interconnected systemic disorders; oral microbiome, dysbiosis and interconnected systemic disorders; periodontology and implantology; applied technologies (disease prevention, teledentistry, machine learning in dentistry education)
REQUIMTE–LAQV, School of Engineering, Polytechnic Institute of Porto, Porto, Portugal
S2. Nanosciences, Chemistry and Materials Science
environmental chemistry; green chemistry; circular economy; (bio)sensors; monitoring and biomonitoring; nanotechnology
The Laboratory of Metals and Alloys Under Extreme Impacts, Ufa University of Science and Technology, Ufa, Russia
S2. Nanosciences, Chemistry and Materials Science
DFT; environmental stability; 2D materials; heterostructures
Institute on Membrane Technology, ITM-CNR, Via P. Bucci, Cubo Rende (CS), Italy
S2 Nanosciences, Chemistry and Materials Science
polymeric and mixed matrix membranes; gas separation membranes; computational methods for membrane science; transport phenomena
Institute of Physics, Nicolaus Copernicus University, Toruń, Poland
S2. Nanosciences, Chemistry and Materials Science
heat transport in thin films and superlattice; photothermal infrared radiometry; new infrared spectroscopic method
Department of Physic, Universit della Calabria, via Pietro Bucci, Arcavacata di Rende, Italy
S2. Nanosciences, Chemistry and Materials Science
hydrogen; methane; CCS; porous materials; nanostructure; energy conversion and storage; 2D materials; self-assembled monolayer
Department of Materials Science, University of Milano-Bicocca, Milan, Italy
S2.Nanosciences, Chemistry and Materials Science
epitaxy; crystal growth modeling; semiconductors; phase-field; nanostructures
Department of Socio-Economic, Management and Statistic Studies, “G. d’Annunzio” University of Chieti-Pescara, Chieti, Italy
S2. Nanosciences, Chemistry and Materials Science
green chemistry; metal nanoparticles; valorization of agroindustrial waste
LEAF—Linking Landscape, Environment, Agriculture and Food Research Center, School of Agronomy, University of Lisbon, Lisboa, Portugal
S2. Nanosciences, Chemistry and Materials Science
rheology; proteins; emulsions; foams; gels; polysaccharides; 3D printing
Department of Dental Techniques, “Carol Davila” University of Medicine and Pharmacy, Bucharest, Romania
S3. Computing and Artificial Intelligence
nanomaterials; oral and maxillofacial surgery; CAD/CAM; 3D printing, implant dentistry; biomaterials
Text Information Processing Laboratory, Kitami Institute of Technology, Japan
S3. Computing and Artificial Intelligence
natural language processing; artificial intelligence
Dipartimento di Fisica e Chimica-“E. Segrè”, Università di Palermo, Palermo, Italy
S3. Computing and Artificial Intelligence
artificial intelligence; applied physics; medical imaging; artificial vision
Institute of Systems and Robotics (ISR-UC), and Department of Electrical and Computer Engineering (DEEC-UC), University of Coimbra, Pólo II, Coimbra, Portugal
S3. Computing and Artificial Intelligence
data mining techniques; big data and big data analytics; multi-agent systems; swarms and swarm intelligence; sensor networks; self-* properties and adaptive algorithms; operating systems and middleware for autonomous and adaptive systems; deep learning ap
Instituto de Telecomunicações, University of Aveiro, Campus Universitário de Santiago, Aveiro, Portugal
S3. Computing and Artificial Intelligence
quantum cryptography; quantum effects in optical fibers; single- and entangled-photonic state generation and detection; quantum homodyne and heterodyne detection
Department of Electronics, University of Alcala, Madrid, Spain
S4. Electrical, Electronics and Communications Engineering
sensors; detectors characterization; digital embedded systems; electronic design; data analysis
Institute of Automatic Control, Electronics and Electrical Engineering, University of Zielona Góra, Zielona Góra, Poland
S4. Electrical, Electronics and Communications Engineering
control systems; formal verification; petri nets; model checking; cyber-physical systems
Institute of Applied Mechanics, Poznan University of Technology, Jana Pawła II, Poznań, Poland
S5. Mechanical and Aerospace Engineering
computational mechanics; corrugated cardboard; fluid mechanics; biomechanics; heat transfer; meshless methods; inverse problems
Department of Industrial Engineering, University of Salerno, Fisciano, Italy
S5. Mechanical and Aerospace Engineering
structural mechanics; fracture mechanics; applied computational mathematics; composite materials and structures; structural junctions; retrofitting of existing structures; thin-walled beams; rheology of materials
Department of Technical Systems Design and Monitoring, Faculty of Manufacturing Technologies with a Seat in Prešov, Technical University of Košice, Bayerova, Prešov, Slovakia
S5. Mechanical and Aerospace Engineering
technical diagnostics; virtual instrumentation; mechanical engineering; nanomaterials
School of Environmental Science and Egineering, Tianjin University, Tianjin, China
S6. Energy, Environmental and Earth Science
functional material; water treatment; adsorption; advanced oxidation; membrane filtration; process design; applications; coupling systems
Institute for Systems and Computing Engineering, Tecnology and Science (INESC TEC), Campus da Faculdade de Engenharia da Universidade do Porto, Porto, Portugal
S6. Energy, Environmental and Earth Science
multi-energy systems; integration of DER in power systems and electricity markets; energy efficiency; consumer engagement
Department of Engineering, Università della Campania “Luigi Vanvitelli”, Aversa, Italy
S6. Energy, Environmental and Earth Science
pile foundations; soil-structure interaction; soil dynamics; geotechnical earthquake engineering; thermal piles
S7. Food Science and Technology
food quality; food chemistry; bioactive compounds; nutrition; Metabolism; foods; beverages; Natural Product; food innovation; milk
Department of Biomedical and Dental Sciences and Morphofunctional Imaging, University of Messina-Policlinico "Gaetano Martino”, Messina, Italy
S7. Food Science and Technology
biomaterials; oral surgery; implantology; oral pathology; prosthodontics; bioengineering
MARE - Marine and Environmental Sciences Centre, ESTM, Politécnico de Leiria, Peniche, Portugal
S7. Food Science and Technology
biotechnology; bioeconomy; biomarkers; circular economy; stress biology
S7. Food Science and Technology
Departamento de Tecnología Química y Ambiental, Universidad Rey Juan Carlos, Móstoles, Spain
S7. Food Science and Technology
contaminants; bioactive compounds; natural toxins; miniaturization; microextraction; sample preparation; liquid chromatography; mass spectrometry; novel sorbents; analytical methods
Lecturer in Electrical and Electronic Engineering, School of Engineering and the Built Environment, Edinburgh Napier University, 10 Colinton Rd, Edinburgh EH10 5DT, UK
S8 Applied Physical Science
metamaterials; metasurfaces; near-zero index materials; sensors; medical diagnostics; electromagnetics; sound waves; heat waves; fluid dynamics; classical mechanics
Department of Mathematics and Informatics, Physic and Earth Sciences (MIFT), University of Messina, Viale F. Stagno d’Alcontres 31, Messina, Italy
S8 Applied Physical Science
environmental radioactivity; gamma spectrometry; liquid scintillation; alpha spectrometry; gas radon detection; emanometry; ionizing radiations
Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hong Kong
S8. Applied Physical Science
sound induced vibration; noise control; building acoustics; environmental noise measurement and control; sound sources identification
Chemical Kinetics Department, Ilie Murgulescu Institute of Physical Chemistry, Bucharest, Romania
S8. Applied Physical Science
physical chemistry, physicochemical characterization of materials; thermal analysis; kinetics; biopolymers, cyclodextrin inclusion complexes; hydrogels; bio-materials for biomedical applications; oxide materials design/synthesis and the thermoreactivity o
1. Department of Physics, Faculty of Science, Ryerson University, Toronto, ON M5B 2K3, Canada
2. Institute of Biomedical Engineering, Science and Technology (iBEST), Li Ka-Shing Knowledge Institute, Toronto, ON M5B 1T8, Canada
S8 Applied Physical Science
physics of biomedical imaging (diffuse tomography, photoacoustics, NIRS, MRI); biophotonics; brain imaging
S8. Applied Physical Science
THz radiation source and detector; THz time–domain spectroscopy; THz frequency–domain spectroscopy; thz imaging; Fourier transform infrared (FTIR) spectroscopy; stimulated Raman scattering (SRS); SRS spectroscopy; SRS microscopy; optical microscopy; biome
S8. Applied Physical Science
materials for solar energy; optical properties of materials; solar receivers; ceramics; nanofluids; nanoparticles; coatings; photon management
Instituto de Química Física Blas Cabrera (IQF-CSIC), Madrid, Spain
S2.Nanosciences, Chemistry and Materials Science
Keywords: photonics; laser materials; theory; data analysis; machine learning
S2. Nanosciences, Chemistry and Materials Science
Dr. Mimimorena Seggio received her PhD in chemical sciences in 2021 from the University of Catania in the laboratory of Photochemistry (PhotoChemLab). Since 2022, she has been an assistant professor at the University of Verona. Her current research interests are focused on the design, development and characterization of optical biosensors applied to the environmental and biomedical fields.
sensor; biosensor; chemical sensor; molecular interactions; photochemistry
1. Department of Biomaterials Technology, Faculty of Mechanical Engineering and Ship Technology, Gdańsk University of Technology, Gdańsk, Poland,
2. Laboratory for Biomaterials and Bioengineering (CRC-Tier I), Department Min-Met-Materials Eng & Regenerative Medicine, CHU de Québec, Laval University, Québec City, QC, Canada
biomaterials, bone and dental cements, composites, magnesium phosphate, bioactive characterization
Invited Speakers
Department of Engineering, University of Sannio, Benevento, Italy
Speech Title: Optoelectronics on Fiber Technology
Armando Ricciardi received the Ph.D. in Information Engineering from the University of Naples “Parthenope”, in 2011. He spent a half of his Ph.D as visiting student at the Microphotonics Group of the Department of Physics and Astronomy of St Andrews University, UK. From 2011 he was a Postdoc Research Assistant at the Engineering Department of University of Sannio in Benevento (Italy) where he is now Assistant Professor of Electronics. His research interests encompass light interaction with complex structures and media, photonic crystals, metamaterials and plasmonics. His current research activity mainly focuses on the development of optical fiber devices based on the Lab-on-Fiber technology for biochemical and biomedical applications. He is Co-founder (CEO from 2018 to 2023) of Often Medical, an innovative startup operating in the MedTech sector. He is co-author of 40 papers in peer-reviewed international journals, 3 international patents, and several tens of proceedings of conferences where he has been invited speaker on several occasions. He is Associate Editor of the Journal of Optics and Laser Technology (Elsevier) and the Journal of Sensors (Hindawi).
lab-on-fiber technology; optical fiber sensors; optical biosensors; medical devices; metamaterials; plasmonics; smart materials
National Reseach Council of Italy (CNR), Institute of Applied Sciences and Intelligent Systems “Eduardo Caianiello”, Pozzuoli, Italy
S4. Electrical, Electronics and Communications Engineering Session
Sessions
S2. Nanosciences, Chemistry and Materials Science
S3. Computing and Artificial Intelligence
S4. Electrical, Electronics and Communications Engineering
S5. Mechanical and Aerospace Engineering
S6. Energy, Environmental and Earth Science
S7. Food Science and Technology
S8. Applied Physical Science
Registration
The registration for ASEC2024 will be free of charge! The registration includes attendance to all conference sessions.
If you are registering several people under the same registration, please do not use the same email address for each person, but their individual university email addresses. Thank you for your understanding.
Please note that the submission and registration are two separate parts. Only scholars who registered can receive a link to access the conference live streaming. The deadline for registration is 27th November 2024 .
Instructions for Authors
ASEC2024 will accept abstracts only. All abstracts accepted for presentation will be collected in a book of abstracts, which will be published on Sciforum.net during and after the conference.
Certificates of Participation are available in your logged-in area of Sciforum.net, under “My certificates” after the conference.
2. All abstracts should be submitted and presented in clear, publication-ready English with accurate grammar and spelling.
3. You may submit multiple abstracts. However, only one abstract will be selected for oral presentation.
4. The abstracts submitted to this conference must be original and novel, without prior publication in any journals or it will not be accepted to this conference.
2. Please select only one presenter for each submission. If you would like to change the presenter after submission, please email us accordingly.
Note: We only accept live presentations.
a. Your submission should include the title, authors, contact details, and main research findings, as well as tables, figures, and graphs where necessary.
b. File format: PDF (.pdf).
c. Size in cm: 60 width x 80 height–portrait orientation.
d. Font size: ≥20.
e. Maximum size: 250 M
Examples of successful submissions can be viewed here at the following links: (1), (2), (3)
You can use our free template to create your poster. The poster template can be downloaded here.
Poster Gallery
Authors who wish to present a poster are invited to send it to the conference email at asec2024@mdpi.com. All posters will be permanently exhibited online in the Poster Gallery.
It is the author's responsibility to identify and declare any personal circumstances or interests that may be perceived as inappropriately influencing the representation or interpretation of clinical research. If there is no conflict, please state "The authors declare no conflicts of interest." This should be conveyed in a separate "Conflict of Interest" statement preceding the "Acknowledgments" and "References" sections at the end of the manuscript. Any financial support for the study must be fully disclosed in the "Acknowledgments" section.
MDPI, the publisher of the Sciforum.net platform, is an open access publisher. We believe authors should retain the copyright to their scholarly works. Hence, by submitting an abstract to this conference, you retain the copyright to the work, but you grant MDPI the non-exclusive right to publish this abstract online on the Sciforum.net platform. This means you can easily submit your full paper (with the abstract) to any scientific journal at a later stage and transfer the copyright to its publisher if required.
Publication Opportunity
1. Applied Sciences Journal Publication
Participants in this conference are cordially invited to contribute a full manuscript to a Special Issue published in Applied Sciences (ISSN: 2076-3417), with a 20% discount on the publication fee. Please note if you have IOAP/association discounts, conference discounts will be combined with IOAP/association discounts. Conference discounts cannot be combined with reviewer vouchers. All submitted papers will undergo MDPI’s standard peer-review procedure. The abstracts should be cited and noted on the first page of the paper.
2. Proceeding Paper Publication
All accepted abstracts will be published in the conference report of ASEC2024 in Engineering Proceedings (SCOPUS Indexed; ISSN: 2673-4591) after quality check. If you wish to publish an extended proceeding paper (4-8 pages), please submit it to the same journal after the conference.
Authors are asked to disclose that it is a proceeding paper of the ASEC2024 conference paper in their cover letter. Carefully read the rules outlined in the 'Instructions for Authors' on the journal’s website and ensure that your submission adheres to these guidelines.
Proceedings paper submission deadline: 30 January 2025.
Manuscripts for the proceedings issue must be formatted as follows:
Title
Full author names
Affiliations (including full postal address) and authors' e-mail addresses
Abstract
Keywords
Introduction
Methods
Results and Discussion
Conclusions
Acknowledgements
References
Event Awards
To acknowledge the support of the conference's esteemed authors and recognize their outstanding scientific accomplishments, we are pleased to announce that the conference will provide 8 awards including the Best Oral Presentation Award and Best Poster Award.
The Awards
Number of Awards Available: 8
Conference Secretariat
Ms. Ariel Zhang
Ms. Nicole Lian
Ms. Sonya Qin
Email: asec2024@mdpi.com
For inquiries regarding submissions and sponsorship opportunities, please feel free to contact us.
S1. Applied Biosciences and Bioengineering
The section “Applied Biosciences and Bioengineering” invites contributions from scientists working in the field of novel biosciences and biological engineering applications. A wide range of topics comprise this section, including:
Keywords: biomedical signal processing; biomedical imaging and image processing; nanotechnology for biomedical applications; computational modeling and simulations in biology and medicine; cellular and tissue engineering; biomaterials; micro- and nano-bioengineering; neural and rehabilitation engineering; biomedical sensors and instrumentation; biorobotics and biomechanics; bio-inspired systems; therapeutic and diagnostic technology; bioinformatics; health informatics; microbiology
Session Chairs
Prof. Dr. Paola Saccomandi, Politecnico di Milano, Department of Mechanical Engineering, Milan, Italy
Dr. Ohshiro Takahito, Institute of Science and Industrial Research, Osaka University, 8-1 Mihogaoka, Ibaraki, Osaka , Japan
Show all accepted abstracts (36) Hide accepted abstracts (36)
List of Accepted Abstracts (36) Toggle list
S2. Nanosciences, Chemistry and Materials Science
Nanosciences, Chemistry, and Materials Science represent a wide topic area that goes from understanding the fundamental principles governing nanoscale phenomena to exploring novel materials with groundbreaking properties. It extends to the forefront of scientific innovation, driving advancements across various fields, from electronics and medicine to environmental sustainability and beyond. By bringing together experts and researchers from diverse backgrounds, this section aims to foster interdisciplinary collaboration and accelerate progress toward addressing pressing global challenges, such as new transportation technologies, structures, and functional elements for energy production and storage, the electronics industry, or the transition to more sustainable and efficient manufacturing technologies.
Session Chair
Prof. Dr. Alberto Jiménez Suárez, Materials Science and Engineering Area, Escuela Superior de Ciencias Experimentales y Tecnología, Universidad Rey Juan Carlos, Calle Tulipán s/n, Madrid, Spain
Show all accepted abstracts (12) Hide accepted abstracts (12)
List of Accepted Abstracts (12) Toggle list
S3. Computing and Artificial Intelligence
The "Computing and Artificial Intelligence" session will explore the latest advancements and applications in AI technologies. This session will cover a wide range of topics, including machine learning algorithms, neural networks, data mining, and the ethical implications of AI. Attendees will gain insights into cutting-edge research and practical implementations that are shaping the future of computing and AI.
Session Chair
Dr. Eugenio Vocaturo, DIMES Department, University of Calabria, Rende, CS, Italy, CNR Nanotec, Rende (CS), Italy
Show all accepted abstracts (26) Hide accepted abstracts (26)
List of Accepted Abstracts (26) Toggle list
S4. Electrical, Electronics and Communications Engineering
This section aims to bring together researchers from various disciplines to discuss advances in the general field of electrical, electronics, and communications engineering. The section welcomes contributions covering either theoretical and experimental research in these exciting fields, and discussions on technology perspectives are encouraged.
Session Chairs
Dr. Cosimo Trono, Fibre Optics Group, Institute of Applied Physics 'Nello Carrara', Italy
Prof. Dr. Stefania Campopiano, Parthenope University of Naples, Naples, Italy
Show all accepted abstracts (5) Hide accepted abstracts (5)
List of Accepted Abstracts (5) Toggle list
S5. Mechanical and Aerospace Engineering
Session Chair
Dr. André Furtado, CERIS, Instituto Superior Técnico, Universidade de Lisboa, Lisboa, Portugal
Show all accepted abstracts (20) Hide accepted abstracts (20)
List of Accepted Abstracts (20) Toggle list
S6. Energy, Environmental and Earth Science
Session Chair
Dr. Grazia Leonzio, Department of Mechanical, Chemical and Material Engineering, University of Cagliari, Italy, Department of Chemical Engineering, Process Systems Engineering, Imperial College London, London SW7 2AZ, UK
Show all accepted abstracts (1) Hide accepted abstracts (1)
List of Accepted Abstracts (1) Toggle list
S7. Food Science and Technology
The scope of the section “Food Science and Technology” is to present recent research data on cutting-edge topics in food science and technology, with an emphasis on food quality, safety, and composition and the development of innovative foods with functional properties and new technologies for preservation, increasing nutritional value, and improving the organoleptic characteristics of food.
Session Chair
Dr. Antonios E. Koutelidakis, Unit of Human Nutrition, Department of Food Science and Nutrition, University of the Aegean, Lemnos, Greece